<![CDATA[No activity of DAHDI]]>Installed my licence key, edited the fop2.cfg to allow the custom buttons file.

In my buttons.cfg i have

[DAHDI/1]
type=trunk
label=DAHDI
channel=DAHDI/2
channel=DAHDI/3
channel=DAHDI/4

restarted the fop2 service, i login i get my custom buttoms layout, and the extentions activity show but no trunk activity.

Why is the activity on the trunks not showing? 😞

]]>http://localhost:4567/topic/1138/no-activity-of-dahdiRSS for NodeTue, 27 Oct 2026 15:51:48 GMTTue, 15 May 2012 16:10:20 GMT60<![CDATA[Reply to No activity of DAHDI on Thu, 21 Aug 2014 13:55:51 GMT]]>Just in case others are looking. I'm using an Xorcom Astribank w/ 2 PRI channels and 8 FXO / 8 FXS. My two configured trunks are the PRI channels.

In the new FOP2 manager, under button config, trunks, I had to input info in the "Extra Channel" field to get the DAHDI channels to show.

It was detected by FOP2 as DAHDI/g1 and DAHDI/g2. In Extra Channel I added "DAHDI/i1" and "DAHDI/i2" respectively and it now works.

]]>http://localhost:4567/post/5129http://localhost:4567/post/5129Thu, 21 Aug 2014 13:55:51 GMT<![CDATA[Reply to No activity of DAHDI on Tue, 15 May 2012 23:19:19 GMT]]>Most probably because the channel names do not match, try

asterisk -rx "core show channels"

While you have some calls up, how are the channels named?

  1. DAHDI/1-1
  2. DAHDI/i1-1

If option 2, then you have to add the i to the channels in your button config file. If 1, then it must work.

Best regards,

]]>http://localhost:4567/post/5128http://localhost:4567/post/5128Tue, 15 May 2012 23:19:19 GMT