<![CDATA[Connecting to server, attempt number : 1]]>HELP ME PLEASE!!!!! MY CONFIGURATION IS CORRECT BUT IS IMPOSSIBLE LOGIN .
HERE MY CONFIGURATION AND SOME TESTS.

centos*CLI> manager show users

username

admin

1 manager users configured.

centos*CLI> manager show connected
Username IP Address
admin 192.168.1.200

[root@centos fop2]# ./fop2_server --test
Flash Operator Panel 2 - No valid license found. Demo Mode
Connection to manager OK!

[root@centos fop2]# ./autoconfig-users-freepbx.sh
user=2203🔢all
user=2204🔢all
user=100🔢all
user=101🔢all
user=102🔢all
user=103🔢all
user=104🔢all
user=105🔢all
user=106🔢all
buttonfile=autobuttons.cfg

[root@centos fop2]# pgrep fop2_server
16520

[root@centos fop2]# netstat -nta
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:868 0.0.0.0:* LISTEN
tcp 0 0 192.168.1.200:5038 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:2000 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:1720 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:4445 0.0.0.0:* LISTEN
tcp 0 0 192.168.1.200:43885 192.168.1.200:5038 ESTABLISHED
tcp 0 0 192.168.1.200:49597 200.61.177.8:80 ESTABLISHED
tcp 0 0 192.168.1.200:5038 192.168.1.200:43885 ESTABLISHED
tcp 0 0 :::80 :::* LISTEN
tcp 0 0 :::22 :::* LISTEN
tcp 0 0 :::443 :::* LISTEN

[root@centos fop2]# iptables -vnL
Chain INPUT (policy ACCEPT 28094 packets, 28M bytes)
pkts bytes target prot opt in out source destination

Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination

Chain OUTPUT (policy ACCEPT 20406 packets, 2819K bytes)
pkts bytes target prot opt in out source destination

fop.cfg

[general]
; AMI definitions
manager_host=192.168.1.200
manager_port=5038
manager_user=admin
manager_secret=amp111
;event_mask=call,agent

; Daemon definitios
;listen_port = 4445
;restrict_host = www.asternic.org
;web_dir = /var/www/html/operator/fop2

; Global Config
language = en
poll_interval = 86400
poll_voicemail = 1
monitor_ipaddress = 0

;master_key = 1234

user=105🔢all
;buttonfile=autobuttons.cfg
;#exec autoconfig-users-freepbx.sh

manager.conf

;
; AMI - The Asterisk Manager Interface
;
[general]
enabled = yes
port = 5038
bindaddr = 192.168.1.200

[admin]
secret = amp111
deny = 0.0.0.0/0.0.0.0
permit = 192.168.1.200/255.255.255.0
read = system,call,command,agent,user,originate
write = system,call,command,agent,user,originate

]]>http://localhost:4567/topic/131/connecting-to-server-attempt-number-1RSS for NodeTue, 27 Oct 2026 05:46:38 GMTMon, 05 Oct 2009 10:24:08 GMT60<![CDATA[Reply to Connecting to server, attempt number : 1 on Mon, 05 Oct 2009 12:16:37 GMT]]>

HELP ME PLEASE!!!!! MY CONFIGURATION IS CORRECT BUT IS IMPOSSIBLE LOGIN .
HERE MY CONFIGURATION AND SOME TESTS.

fop.cfg

[general]
; AMI definitions
manager_host=192.168.1.200
manager_port=5038
manager_user=admin
manager_secret=amp111
;event_mask=call,agent

; Daemon definitios
;listen_port = 4445
;restrict_host = http://www.asternic.org
;web_dir = /var/www/html/operator/fop2

; Global Config
language = en
poll_interval = 86400
poll_voicemail = 1
monitor_ipaddress = 0

;master_key = 1234

user=105🔢all
;buttonfile=autobuttons.cfg
;#exec autoconfig-users-freepbx.sh
[/color:1ha79am0]

Look at the text in red above.. if you use freepbx, you should uncomment the #exec line and comment the user line, so it should look like:

;user=105:1234:all
;buttonfile=autobuttons.cfg
#exec autoconfig-users-freepbx.sh

[/color:1ha79am0]

]]>http://localhost:4567/post/600http://localhost:4567/post/600Mon, 05 Oct 2009 12:16:37 GMT