so instead of
sh scriptname.sh

I did
./scriptname, and voilà it worked

;ssl_certificate_file=/etc/pki/tls/certs/localhost.crt
;ssl_certificate_key_file=/etc/pki/tls/private/localhost.key

Uncomment those and put the same certificates you have configured in your web server, most probably the name/paths are different in your gentoo installation (above is for default centos install). So, check your httpd.conf file or similar to see where are the certificate files located and replicate that in fop2.cfg

Another option is to disable websockets, fop2 will use flash xmlsockets instead. Edit /var/www/html/fop2/js/presence.js and set disableWebSocket=true, then clear your browser cache and try again

sh autoconfig-buttons-freepbx.sh
autoconfig-buttons-freepbx.sh: line 38: syntax error near unexpected token <' autoconfig-buttons-freepbx.sh: line 38: done < <( mysql -NB -u $DBUSER -p$DBPASS -h $DBHOST $DBNAME -e "SHOW tables FROM `$DBNAME` LIKE 'fop2users'" )'

but wait a second. I tried the following:

instead of https://sipserver/fop2 I tried with http://sipserver/fop2 and voilà the login was ok

I did not think about it, cause I only use https:// for my freepbx website...

Is it possible to run fop2 page on port 443?

emerge --search:

app-shells/bash
Latest version available: 4.2_p45
Latest version installed: 4.2_p45
Size of files: 6,952 kB
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html
Description: The standard GNU Bourne again shell
License: GPL-3

And yes, I do have freepbx-2.11.0rc1 installed from tarball. I also come from installing the adminmodule via webinterface, and that worked without problem. There is no manual configuration left, I just had tried to see, if I could login at least with manual config, but I was not able to login with manual configuration eather, and that's what I cannot understand..

As for the error with the script(s): I dont understand which line has to be deleted, and / or if there is a manual way of doing the job that this script tries to do. Following again the errors, when trying to execute the scripts manually:

cd /usr/local/fop2
sh autoconfig-users-freepbx.sh
autoconfig-users-freepbx.sh: line 32: syntax error near unexpected token <' autoconfig-users-freepbx.sh: line 32: done < <( mysql -NB -u $DBUSER -p$DBPASS -h $DBHOST $DBNAME -e "SHOW tables FROM `$DBNAME` LIKE 'fop2users'" )'

and

sh autoconfig-buttons-freepbx.sh
autoconfig-buttons-freepbx.sh: line 38: syntax error near unexpected token <' autoconfig-buttons-freepbx.sh: line 38: done < <( mysql -NB -u $DBUSER -p$DBPASS -h $DBHOST $DBNAME -e "SHOW tables FROM `$DBNAME` LIKE 'fop2users'" )'

Thanks again for trying to help. Its so annoying because I think, I am only one step away of having a look and test your promising software

In FOP2 Admin Module I can see the extensions, which have voicemail enabled and I tried to modify the secret of one user, and then try to login with it, but it does not work :oops:

Also, one common mistake is to mix manual configuration with automatic configurations. Once you fix the autoconfig scirpt, be sure you remove all manual user=xxx lines you might have or buttonfile=xxx and leave ONLY the last #exec line.

Finally, to see what user/pass you can use to login, execute the autoconfig-users-freepbx.sh script again and inspect the output.

I am making some progress here

I now can start the fop_server successfully - having installed the 2.27 version - and as you said, without needing to create a symlink for libcrypto libraries. netstat -nl now shows listening on port 4445

Unfortunatelly I still cannot login in successfully. Not with my extension, which has enabled its voicemail, and not with a user, defined in fop2.cfg. (I tried also with uncommented button.cfg, and also with deactivated addons on my browser, even stopped iptables service to be sure, it is not a problem with the firewall)

So I decided to execute the shell script autoconfig-users-freepbx.sh manually to see what happens, and got this error:

sh autoconfig-users-freepbx.sh
autoconfig-users-freepbx.sh: line 32: syntax error near unexpected token <' autoconfig-users-freepbx.sh: line 32: done < <( mysql -NB -u $DBUSER -p$DBPASS -h $DBHOST $DBNAME -e "SHOW tables FROM `$DBNAME` LIKE 'fop2users'" )'

repetition of my install steps:

• wget file to /usr/src and untarred it
• cd to created fop2 directory and executed make install
• modified fop2.cfg and set manager_user and manager_secret
• created /usr/local/fop2/tmp
• executed export PAR_GLOBAL_TMPDIR=/usr/local/fop2/tmp/
• cd /usr/local/fop2 and executed ./fop_server --test

-> Flash Operator Panel 2 - License file fop2.lic not found.
Running in Demo Mode
Connection to manager OK!

So I started server as daemon:

• ./fop2_server -d

Then I tried to login with an existing extension, which has a voicemail account configured, and this did not work, then tried with user 622 and pass 1234 which I uncommented in fop2.cfg but this did not let me login eather.

I get attemting to connect to server 1....2.....3.....4 and so on.

Thanks in advance for your help.

last thing, I tried is:
fop_server -X 3 and there it seems to be able to connect db as it shows:

127.0.0.1 -> AuthType: md5
127.0.0.1 -> Action: Challenge
127.0.0.1 -> ActionID: 1

127.0.0.1 <- Response: Success
127.0.0.1 <- ActionID: 1
127.0.0.1 <- Challenge: xxxxx

127.0.0.1 -> AuthType: md5
127.0.0.1 -> Events: on
127.0.0.1 -> Username: xxxx
127.0.0.1 -> Action: login
127.0.0.1 -> Key: xxxx
127.0.0.1 -> ActionID: 2

127.0.0.1 <- Response: Success
127.0.0.1 <- ActionID: 2
127.0.0.1 <- Message: Authentication accepted
127.0.0.1 -> Mailbox: xxxx@novm
127.0.0.1 -> Action: MailboxStatus
127.0.0.1 -> ActionID: 3

127.0.0.1 -> Action: Status

127.0.0.1 -> Action: QueueStatus

127.0.0.1 -> Action: Agent

127.0.0.1 -> Action: SipPeers

127.0.0.1 -> Action: IaxPeers

127.0.0.1 -> Action: ParkedCalls

127.0.0.1 -> Command: database show AMPUSER
127.0.0.1 -> Action: Command
127.0.0.1 -> ActionID: 4
127.0.0.1 -> Command: database show DEVICE
127.0.0.1 -> Action: Command
127.0.0.1 -> ActionID: 5

127.0.0.1 -> Command: meetme list xxxx concise
127.0.0.1 -> Action: Command
127.0.0.1 -> ActionID: 6

127.0.0.1 -> Conference: xxxx
127.0.0.1 -> Action: ConfbridgeList
127.0.0.1 -> ActionID: 7

127.0.0.1 -> Command: database show fop2notes
127.0.0.1 -> Action: Command
127.0.0.1 -> ActionID: 8

127.0.0.1 -> Command: database show fop2state
127.0.0.1 -> Action: Command
127.0.0.1 -> ActionID: 9

127.0.0.1 -> Action: CoreSettings
127.0.0.1 -> ActionID: 10

127.0.0.1 <- Event: FullyBooted
127.0.0.1 <- Privilege: system,all
127.0.0.1 <- Status: Fully Booted

127.0.0.1 <- Response: Success
127.0.0.1 <- ActionID: 3
127.0.0.1 <- Message: Mailbox Status
127.0.0.1 <- Mailbox: xxxx@novm
127.0.0.1 <- Waiting: 0

127.0.0.1 -> Mailbox: xxxx@novm
127.0.0.1 -> Action: MailboxCount
127.0.0.1 -> ActionID: 11

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Channel status will follow

127.0.0.1 <- Event: StatusComplete
127.0.0.1 <- Items: 0

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Queue status will follow

127.0.0.1 <- Event: QueueParams
127.0.0.1 <- Queue: default
127.0.0.1 <- Max: 0
127.0.0.1 <- Strategy: ringall
127.0.0.1 <- Calls: 0
127.0.0.1 <- Holdtime: 0
127.0.0.1 <- TalkTime: 0
127.0.0.1 <- Completed: 0
127.0.0.1 <- Abandoned: 0
127.0.0.1 <- ServiceLevel: 0
127.0.0.1 <- ServicelevelPerf: 0.0
127.0.0.1 <- Weight: 0

127.0.0.1 <- Event: QueueStatusComplete

127.0.0.1 <- Response: Error
127.0.0.1 <- Message: Invalid/unknown command: Agent. Use Action: List commands to show available commands.

127.0.0.1 <- Response: Success
127.0.0.1 <- EventList: start
127.0.0.1 <- Message: Peer status list will follow

127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: xxxx
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: -none-
127.0.0.1 <- IPport: 0
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- AutoForcerport: no
127.0.0.1 <- Forcerport: yes
127.0.0.1 <- AutoComedia: no
127.0.0.1 <- Comedia: yes
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- TextSupport: no
127.0.0.1 <- ACL: yes
127.0.0.1 <- Status: UNKNOWN
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Description:

127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: xxxx
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: -none-
127.0.0.1 <- IPport: 0
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- AutoForcerport: no
127.0.0.1 <- Forcerport: yes
127.0.0.1 <- AutoComedia: no
127.0.0.1 <- Comedia: yes
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- TextSupport: no
127.0.0.1 <- ACL: yes
127.0.0.1 <- Status: UNKNOWN
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Description:

and so on for all my peers, followed by the siptrunk connections:

127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: <tel.number>
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: ip.add.re.ss
127.0.0.1 <- IPport: port
127.0.0.1 <- Dynamic: no
127.0.0.1 <- AutoForcerport: no
127.0.0.1 <- Forcerport: yes
127.0.0.1 <- AutoComedia: no
127.0.0.1 <- Comedia: yes
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- TextSupport: no
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: Unmonitored
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Description:

....

127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: context for outgoing calls
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: x.y.z.w
127.0.0.1 <- IPport: port
127.0.0.1 <- Dynamic: no
127.0.0.1 <- AutoForcerport: no
127.0.0.1 <- Forcerport: no
127.0.0.1 <- AutoComedia: no
127.0.0.1 <- Comedia: no
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- TextSupport: no
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: OK (12 ms)
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Description:

127.0.0.1 <- Event: PeerlistComplete
127.0.0.1 <- EventList: Complete
127.0.0.1 <- ListItems: 46

127.0.0.1 <- Response: Success
127.0.0.1 <- EventList: start
127.0.0.1 <- Message: Peer status list will follow

127.0.0.1 <- Event: PeerlistComplete
127.0.0.1 <- EventList: Complete
127.0.0.1 <- ListItems: 0

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Parked calls will follow

127.0.0.1 <- Event: ParkedCallsComplete
127.0.0.1 <- Total: 0

127.0.0.1 <- Response: Follows
127.0.0.1 <- Privilege: Command
127.0.0.1 <- ActionID: 4
127.0.0.1 <- /AMPUSER//queues/qnostate
/AMPUSER/xxxx/answermode : disabled
/AMPUSER/xxxx/ccss/cc_agent_policy : generic
/AMPUSER/xxxx/ccss/cc_offer_timer : 30
/AMPUSER/xxxx/ccss/last_number : xxxx
/AMPUSER/xxxx/cfringtimer : 0
/AMPUSER/xxxx/cidnum : xxxx
/AMPUSER/xxxx/concurrency_limit : 0
/AMPUSER/xxxx/device : xxxx
/AMPUSER/xxxx/followme/changecid : default
/AMPUSER/xxxx/followme/ddial : DIRECT
/AMPUSER/xxxx/followme/fixedcid :
/AMPUSER/xxxx/followme/grpconf : DISABLED
/AMPUSER/xxxx/followme/grplist : tel_number#
/AMPUSER/xxxx/followme/grptime : 20
/AMPUSER/xxxx/followme/prering : 0
/AMPUSER/xxxx/language :
/AMPUSER/xxxx/noanswer :
/AMPUSER/xxxx/outboundcid :
/AMPUSER/xxxx/password : secret
/AMPUSER/xxxx/queues/qnostate : usestate
/AMPUSER/xxxx/recording :
/AMPUSER/xxxx/recording/in/external : dontcare
/AMPUSER/xxxx/recording/in/internal : dontcare
/AMPUSER/xxxx/recording/ondemand : disabled
/AMPUSER/xxxx/recording/out/external : dontcare
/AMPUSER/xxxx/recording/out/internal : dontcare
/AMPUSER/xxxx/recording/priority : 10
/AMPUSER/xxxx/ringtimer : 0
/AMPUSER/xxxx/voicemail : novm

and so on for my other extensions

127.0.0.1 -> Action: DBGet
127.0.0.1 -> Family: DEVICE/xxxx
127.0.0.1 -> Key: dial
127.0.0.1 -> ActionID: getDEVICE-xxxx

for all extensions again..
127.0.0.1 <- Response: Follows
127.0.0.1 <- Privilege: Command
127.0.0.1 <- ActionID: 5
127.0.0.1 <- /DEVICE/xxxx/default_user : xxxx
/DEVICE/xxxx/dial : SIP/xxxx
/DEVICE/xxxx/type : fixed
/DEVICE/xxxx/user : xxxx
...
127.0.0.1 <- Response: Follows
127.0.0.1 <- Privilege: Command
C127.0.0.1 <- ActionID: 6
127.0.0.1 <- No such command 'meetme list xxxx concise' (type 'core show help meetme list' for other possible commands)
--END COMMAND--

127.0.0.1 <- Response: Error
127.0.0.1 <- ActionID: 7
127.0.0.1 <- Message: No active conferences.

127.0.0.1 <- Response: Follows
127.0.0.1 <- Privilege: Command
127.0.0.1 <- ActionID: 8
127.0.0.1 <- 0 results found.
--END COMMAND--

127.0.0.1 <- Response: Follows
127.0.0.1 <- Privilege: Command
127.0.0.1 <- ActionID: 9
127.0.0.1 <- 0 results found.
--END COMMAND--

127.0.0.1 <- Response: Success
127.0.0.1 <- ActionID: 10
127.0.0.1 <- AMIversion: 1.3
127.0.0.1 <- AsteriskVersion: 11.2.2
127.0.0.1 <- SystemName:
127.0.0.1 <- CoreMaxCalls: 0
127.0.0.1 <- CoreMaxLoadAvg: 0.000000
127.0.0.1 <- CoreRunUser:
127.0.0.1 <- CoreRunGroup:
127.0.0.1 <- CoreMaxFilehandles: 0
127.0.0.1 <- CoreRealTimeEnabled: No
127.0.0.1 <- CoreCDRenabled: Yes
127.0.0.1 <- CoreHTTPenabled: No

127.0.0.1 <- Response: Success
127.0.0.1 <- ActionID: 11
127.0.0.1 <- Message: Mailbox Message Count
127.0.0.1 <- Mailbox: xxxx@novm
127.0.0.1 <- UrgMessages: 0
127.0.0.1 <- NewMessages: 0
127.0.0.1 <- OldMessages: 0

127.0.0.1 -> Mailbox: xxxx@novm
127.0.0.1 -> Action: MailboxStatus
127.0.0.1 -> ActionID: 12

127.0.0.1 <- Response: Success
127.0.0.1 <- ActionID: getDEVICE-xxxx
127.0.0.1 <- Message: Result will follow

127.0.0.1 <- Event: DBGetResponse
127.0.0.1 <- Family: DEVICE/xxxx
127.0.0.1 <- Key: dial
127.0.0.1 <- Val: SIP/xxxx
127.0.0.1 <- ActionID: getDEVICE-xxxx

127.0.0.1 <- Event: DBGetComplete
127.0.0.1 <- ActionID: getDEVICE-xxxx
.....
127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Channel status will follow

127.0.0.1 <- Event: StatusComplete
127.0.0.1 <- Items: 0

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Queue status will follow

127.0.0.1 <- Event: QueueParams
127.0.0.1 <- Queue: default
127.0.0.1 <- Max: 0
127.0.0.1 <- Strategy: ringall
127.0.0.1 <- Calls: 0
127.0.0.1 <- Holdtime: 0
127.0.0.1 <- TalkTime: 0
127.0.0.1 <- Completed: 0
127.0.0.1 <- Abandoned: 0
127.0.0.1 <- ServiceLevel: 0
127.0.0.1 <- ServicelevelPerf: 0.0
127.0.0.1 <- Weight: 0

127.0.0.1 <- Event: QueueStatusComplete

127.0.0.1 <- Response: Success
127.0.0.1 <- ActionID: 13
127.0.0.1 <- Message: Mailbox Message Count
127.0.0.1 <- Mailbox: xxxx@novm
127.0.0.1 <- UrgMessages: 0
127.0.0.1 <- NewMessages: 0
127.0.0.1 <- OldMessages: 0
....
127.0.0.1 -> Action: Logoff

Removing /var/www/html/fop2-variables.txt...

Removing ./fop2-variablesGENERAL.txt...

Disconnecting from settings DB

Exiting...

http://download.fop2.com/fop2-2.27-debian-i386.tgz
http://download.fop2.com/fop2-2.27-debian-x86_64.tgz

The last question in the FAQ tells you how to create a symlink for centos 6, but gentoo will most probably have a different library or location, so you will have to tweak the command to match your environment.

Best regards

and here's what I get now starting fop2_server:

Can't load '/usr/local/fop2/tmp/par-root/cache-4b3df8b00ea32d78fbcfc645d56579285258145c/aaf44dba.so' for module Filter::Crypto::Decrypt: libcrypto.so.6: cannot open shared object file: No such file or directory at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/DynaLoader.pm line 230.

at /usr/lib/perl5/site_perl/5.8.8/PAR/Heavy.pm line 128
BEGIN failed--compilation aborted at /usr/local/fop2/tmp/par-root/cache-4b3df8b00ea32d78fbcfc645d56579285258145c/inc/lib/Filter/Crypto/Decrypt.pm line 37.
Compilation failed in require at script/fop2_server.pl line 1.
BEGIN failed--compilation aborted at script/fop2_server.pl line 1.

I checked and DynaLoader.pm is located here on my system:
/usr/lib/perl5/5.12.4/i686-linux/DynaLoader.pm

I have used the centos5 i386 tarball for 32-bit systems, should I have used the one for debian 32-bit systems?

I have installed dev-lang/perl-5.12.4-r1, which is the actual stable version in gentoo. Is there a way/fix to use fop2 with this perl version?

www.fop2.com/documentation-faq.php

Best regards,