<![CDATA[Can't get transfer to work with fop2]]>Using Asterisk 1.6.0.17 with FOP2. Everything except transfer seems to work. When I attempt a transfer, absolutely nothing happens. No error messages and no messages on the Asterisk console.

]]>http://localhost:4567/topic/184/can-t-get-transfer-to-work-with-fop2RSS for NodeTue, 27 Oct 2026 06:41:27 GMTFri, 20 Nov 2009 18:02:34 GMT60<![CDATA[Reply to Can't get transfer to work with fop2 on Mon, 23 Nov 2009 15:45:31 GMT]]>I didn't have blind_xfer=1 configured. I will try that when I get back to the location with the system.

]]>http://localhost:4567/post/823http://localhost:4567/post/823Mon, 23 Nov 2009 15:45:31 GMT<![CDATA[Reply to Can't get transfer to work with fop2 on Sun, 22 Nov 2009 14:49:47 GMT]]>Do you have the originate permission in the asterisk manager user that fop2 uses? Look at asterisk's full log after enabling debug in the asterisk cli for hints. You also need to set blind_transfer=1 in fop2.cfg

If you use freepbx and automatic configuration it should work fine, if you did a manual configuration, be sure to set the correct extension and context for each extension button (should be an existent extension under the context you specify in the asterisk dialplan)

Best regards,

]]>http://localhost:4567/post/822http://localhost:4567/post/822Sun, 22 Nov 2009 14:49:47 GMT