<![CDATA[CallFlow plugin not creating custom-fop2-callflow]]>FOP2 2.30.04. Installed Callflow plugin, restarted fop2 and reloaded asterisk. Call Flow pane shows up and populates buttons for all of my time conditions as well as callflows, but none of them work.
When I click on any of them, they do toggle, but then revert a few seconds later.
Digging into logs, when I hit a button for a call flow I get:

set call flow origen 6, destino 0~NIGHT, exten GENERAL, final exten *270, slot 0, value NIGHT
127.0.0.1 -> Exten: *270
127.0.0.1 -> Action: Originate
127.0.0.1 -> Channel: Local/s@custom-fop2-callflow
127.0.0.1 -> Priority: 1
127.0.0.1 -> Context: from-internal
127.0.0.1 -> ActionID: 14461

pong pong call flow!

127.0.0.1 -> Action: DBGet
127.0.0.1 -> Family: DAYNIGHT
127.0.0.1 -> Key: C0
127.0.0.1 -> ActionID: 14462

127.0.0.1 -> Action: DBGet
127.0.0.1 -> Family: TC
127.0.0.1 -> Key: 0
127.0.0.1 -> ActionID: 14463

127.0.0.1 -> Action: DBGet
127.0.0.1 -> Family: DAYNIGHT
127.0.0.1 -> Key: C1
127.0.0.1 -> ActionID: 14464

127.0.0.1 -> Action: DBGet
127.0.0.1 -> Family: TC
127.0.0.1 -> Key: 1
127.0.0.1 -> ActionID: 14465

127.0.0.1 -> Action: DBGet
127.0.0.1 -> Family: DAYNIGHT
127.0.0.1 -> Key: C2
127.0.0.1 -> ActionID: 14466

127.0.0.1 -> Action: DBGet
127.0.0.1 -> Family: TC
127.0.0.1 -> Key: 2
127.0.0.1 -> ActionID: 14467

127.0.0.1 -> Action: DBGet
127.0.0.1 -> Family: DAYNIGHT
127.0.0.1 -> Key: C3
127.0.0.1 -> ActionID: 14468

127.0.0.1 -> Action: DBGet
127.0.0.1 -> Family: TC
127.0.0.1 -> Key: 3
127.0.0.1 -> ActionID: 14469

127.0.0.1 -> Action: DBGet
127.0.0.1 -> Family: DAYNIGHT
127.0.0.1 -> Key: C4
127.0.0.1 -> ActionID: 14470

127.0.0.1 -> Action: DBGet
127.0.0.1 -> Family: TC
127.0.0.1 -> Key: 4
127.0.0.1 -> ActionID: 14471

127.0.0.1 -> Action: UserEvent
127.0.0.1 -> UserEvent: GETVAR
127.0.0.1 -> Family: DAYNIGHT/C0
127.0.0.1 -> Value: DAY
127.0.0.1 -> Channel: SIP/220

127.0.0.1 -> Action: UserEvent
127.0.0.1 -> UserEvent: GETVAR
127.0.0.1 -> Family: TC/0
127.0.0.1 -> Value: ERROR
127.0.0.1 -> Channel: SIP/220

127.0.0.1 -> Action: UserEvent
127.0.0.1 -> UserEvent: GETVAR
127.0.0.1 -> Family: DAYNIGHT/C1
127.0.0.1 -> Value: ERROR
127.0.0.1 -> Channel: SIP/220

127.0.0.1 -> Action: UserEvent
127.0.0.1 -> UserEvent: GETVAR
127.0.0.1 -> Family: TC/1
127.0.0.1 -> Value:
127.0.0.1 -> Channel: SIP/220

127.0.0.1 -> Action: UserEvent
127.0.0.1 -> UserEvent: GETVAR
127.0.0.1 -> Family: DAYNIGHT/C2
127.0.0.1 -> Value: ERROR
127.0.0.1 -> Channel: SIP/220

127.0.0.1 -> Action: UserEvent
127.0.0.1 -> UserEvent: GETVAR
127.0.0.1 -> Family: TC/2
127.0.0.1 -> Value:
127.0.0.1 -> Channel: SIP/220

127.0.0.1 -> Action: UserEvent
127.0.0.1 -> UserEvent: GETVAR
127.0.0.1 -> Family: DAYNIGHT/C3
127.0.0.1 -> Value: ERROR
127.0.0.1 -> Channel: SIP/220

127.0.0.1 -> Action: UserEvent
127.0.0.1 -> UserEvent: GETVAR
127.0.0.1 -> Family: TC/3
127.0.0.1 -> Value:
127.0.0.1 -> Channel: SIP/220

127.0.0.1 -> Action: UserEvent
127.0.0.1 -> UserEvent: GETVAR
127.0.0.1 -> Family: DAYNIGHT/C4
127.0.0.1 -> Value: ERROR
127.0.0.1 -> Channel: SIP/220

127.0.0.1 -> Action: UserEvent
127.0.0.1 -> UserEvent: GETVAR
127.0.0.1 -> Family: TC/4
127.0.0.1 -> Value:
127.0.0.1 -> Channel: SIP/220

Discussed this with support, and all we've come up with is that the custom_fop2_callflow is not being generated but have no idea why. Back over to my asterisk/freepbx logs, I do not see any errors pertaining to the generation of the custom dialplans.
Fop2 is configured to connect to AMI as 'admin', which has all permissions.
When I check Asterisk dialplans for the custom_fop2_callflow, it does not exist.

Anyone else run into this? I feel like I'm unlikely to get any further support from Fop guy. Been fighting with this for two weeks and the back and forth with support hasn't been going anywhere. I figure there must be a log, or a way to enable logging of the scripts run to generate the custom dialplans.

]]>https://forum.fop2.com/topic/2201/callflow-plugin-not-creating-custom-fop2-callflowRSS for NodeTue, 27 Oct 2026 20:02:00 GMTWed, 23 Mar 2016 16:17:47 GMT60<![CDATA[Reply to CallFlow plugin not creating custom-fop2-callflow on Wed, 23 Mar 2016 19:57:45 GMT]]>The dialplan is created using AMI commands, but instead of smashing your head, you can very well add the context manually in any valid .conf file you might have. I already wrote the context in my previous reply..

If you want to see the actual commands, then start fop2 server in debug mode:

http://support.asternic.biz/?/selfhelp/view-article/how-to-debug-fop2/10

]]>https://forum.fop2.com/post/9682https://forum.fop2.com/post/9682Wed, 23 Mar 2016 19:57:45 GMT<![CDATA[Reply to CallFlow plugin not creating custom-fop2-callflow on Wed, 23 Mar 2016 19:35:47 GMT]]>Oh, also, I can see in my logs that the fop2 user (or admin) is in fact connecting to AMI successfully.

]]>https://forum.fop2.com/post/9681https://forum.fop2.com/post/9681Wed, 23 Mar 2016 19:35:47 GMT<![CDATA[Reply to CallFlow plugin not creating custom-fop2-callflow on Wed, 23 Mar 2016 19:30:11 GMT]]>[admin]
secret = ********
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate,message
write = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate,message
writetimeout = 5000

That is the user I have fop2 configured to use. I've also setup a user called "fop2" with the permissions stated in the documentation linked. No change.
When is the dialplan generated and is there any way I can run the config script manually to see what's failing?

]]>https://forum.fop2.com/post/9680https://forum.fop2.com/post/9680Wed, 23 Mar 2016 19:30:11 GMT<![CDATA[Reply to CallFlow plugin not creating custom-fop2-callflow on Wed, 23 Mar 2016 19:12:50 GMT]]>What permissions has the admin user? I suggest you to create a fop2 user in your manager_custom.conf file as suggested in the documentation, using the exact values as set in the documentation:

http://www.fop2.com/docs/#ConfiguringtheServer

Perhaps your "admin" user lacks the "config" permission, in any case, try with a special user with "all" permissions set.

In any case, the context is super simple, is just a dummy context/location so you can use it as an originating local channel that does absolutely nothing:

[custom-fop2-callflow]
exten => s,1,Answer()
exten => s,2,Wait(10)

Best regards,

]]>https://forum.fop2.com/post/9679https://forum.fop2.com/post/9679Wed, 23 Mar 2016 19:12:50 GMT