<![CDATA[Can't Invoke License]]>Well this is Ironic as this was my last post >> http://forum.fop2.com/4256-can-t-revoke-fop2-license

I have spent about the last 6 months migrating our phone servers and this is the final step and its becoming way too difficult.

Every time I put in my code it says "successful" on the CLI but the web says "unactivated" then I can't revoke, but it seems I can still invoke the license, like it never contacted your servers in the first place. (I'm nervous to try again ATM). (I did the below CLI stuff 2 times and had the same results)

License Activation

Enter your serial code: #########

Serial code available!

Registration Successfull

You must restart the FOP2 service to enable the license.

Restarting fop2 (via systemctl): [ OK ]
[root@node2 html]# /usr/local/fop2/fop2_server --revoke && service fop2 restart
There is no valid license file to revoke.
[root@node2 html]# ^C
[root@node2 html]# /usr/local/fop2/fop2_server --test
Flash Operator Panel 2 - Invalid license.
Running in Demo Mode
Use of uninitialized value in split at script/fop2_server.pl line 425.
Backticks found where operator expected at (eval 89) line 2, at end of line
(Might be a runaway multi-line `` string starting on line 1)
Unrecognized character \xEE at (eval 89) line 2.
Unrecognized character \xE6 at (eval 90) line 1.
Connection to manager OK!
[root@node2 html]#

I am trying to migrate our FOP2 instance, this time I moved only the /var/www/html/fop2 folder and left the /usr/local/fop2 alone. I am not running it remotely as I had issues getting that to work properly.

(I tried not migrating the folder, but then all our queue's were empty, so now I wanted to try just moving that directory, and I am getting errors) Our other server runs FOP2 2.30, perhaps I need to use the same version?

]]>http://localhost:4567/topic/2284/can-t-invoke-licenseRSS for NodeTue, 27 Oct 2026 08:17:19 GMTMon, 11 Jul 2016 12:49:45 GMT60<![CDATA[Reply to Can't Invoke License on Wed, 13 Jul 2016 02:08:24 GMT]]>If you do not have a valid license, then revoke will fail. You cannot revoke if you do not have a valid license. The log you pasted shows just that.

Invalid license means that the license file you have was for a server with a different MAC address than the one for eth0.

If you registered by passing -i xxx parameter to use a different nic name, then you must also pass -i xxx to the --test so you can test against that particular card. If you never used -i xxx, then ignore this paragraph.

Now, if you do not have a valid license, then you have to request a manual revocation so you can directly call --register and get a new one. You can request that via live help or support.asternic.biz

Best regards,

]]>http://localhost:4567/post/10018http://localhost:4567/post/10018Wed, 13 Jul 2016 02:08:24 GMT