<![CDATA[Privacy Options]]>We have a setup where there are a number of support people and then administration. We would like to setup so that the support people can see who is online from both groups, but they should not be able to see the caller ID information for calls that the administration group is on. This works, BUT now the administration group cannot see the caller ID either. This even effects your extension when logged in (ie. Extension 500 cannot see caller ID for extension 500).

Is there a way to resolve this issue and if not, can this be submitted as a feature request going forward. Thanks!

]]>http://localhost:4567/topic/403/privacy-optionsRSS for NodeTue, 27 Oct 2026 10:40:44 GMTWed, 19 May 2010 13:48:23 GMT60<![CDATA[Reply to Privacy Options on Mon, 20 Jun 2016 21:21:15 GMT]]>It is not possible to have privacy for some users.

You could use panel contexts (tenants) to have two separate button config files, but you will have to use custom configuration for that and not use the fop2 manager. One tenant can have privacy enabled, and a different tenant privacy not enabled.

Quite a bit of work, but it would be doable that way.

]]>http://localhost:4567/post/1830http://localhost:4567/post/1830Mon, 20 Jun 2016 21:21:15 GMT<![CDATA[Reply to Privacy Options on Fri, 10 Jun 2016 00:44:47 GMT]]>i am not sure if brakk was able to resolve this issue with the update, but i would love to be able to recreate something like this as well. I do not know if it has been at all addressed in 2.31 since but i will ask.

Can i set it up sort of like what the user above me has requested. I would like to have ADMINS not be restricted from seeing an extensions caller id or not be able to record them. But sales agents should not be able to see each others callerid's when on a call.

It looks like the user brakk may have gotten it to work but there has been no update. i do not have multiple offices or server, just the one. also i am using freepbx which has an autoconfig buttons file, so i am not sure if it has a custom buttons page that i would be able to edit if i could.

I was just hoping for a little guidance if this was possible in the present and continue this thread for a solution.

thanks!

]]>http://localhost:4567/post/1829http://localhost:4567/post/1829Fri, 10 Jun 2016 00:44:47 GMT<![CDATA[Reply to Privacy Options on Fri, 04 Mar 2016 20:40:04 GMT]]>Ok, will try that. Thanks for the quick response.

]]>http://localhost:4567/post/1828http://localhost:4567/post/1828Fri, 04 Mar 2016 20:40:04 GMT<![CDATA[Reply to Privacy Options on Fri, 04 Mar 2016 20:28:01 GMT]]>You might want to upgrade FOP2, 2.26 is quite old and I remember there were some problems with privacy inheritance in older versions, that is what might be happening to you. Lets check:

changeset: 523:f9abe3a5278a
user: Nicolas Gudino nicolas@house.com.ar
date: Wed Jul 24 00:06:06 2013 -0300
summary: Fix privacy in buttons to respect panel contexts

Fixed almost 3 years ago. Version 2.28 fixed that for sure. Version 2.29 changed the multi tenancy licensing (it is not more unlimited, so you might want to use 2.28).

]]>http://localhost:4567/post/1827http://localhost:4567/post/1827Fri, 04 Mar 2016 20:28:01 GMT<![CDATA[Reply to Privacy Options on Fri, 04 Mar 2016 19:19:13 GMT]]>All users, including admins cannot see the caller id's, so it seems like the last group which has "privacy=clid" is overriding the admin's and the Vancouver privacy settings.

]]>http://localhost:4567/post/1826http://localhost:4567/post/1826Fri, 04 Mar 2016 19:19:13 GMT<![CDATA[Reply to Privacy Options on Fri, 04 Mar 2016 19:18:04 GMT]]>Plus we have another group for another office that have this:

[SIP/W_XXXXXXXXXXXX]
type=extension
label=Catherine 3114
context=executive_sets
extension=3114
mailbox=3114@xxxx
extenvoicemail=*873114@user_services
privacy=clid
group = White Rock

[SIP/W_XXXXXXXXXXXX]
type=extension
label=Christina 3104
context=executive_sets
extension=3104
mailbox=3104@xxxx
extenvoicemail=*873104@user_services
privacy=clid
group = White Rock

[SIP/W_XXXXXXXXXXXX]
type=extension
label=Cory 3127
context=executive_sets
extension=3127
mailbox=3127@xxxx
extenvoicemail=*213127@user_services
privacy=clid
group = White Rock

]]>http://localhost:4567/post/1825http://localhost:4567/post/1825Fri, 04 Mar 2016 19:18:04 GMT<![CDATA[Reply to Privacy Options on Fri, 04 Mar 2016 19:15:01 GMT]]>We are using 2.26 and here's a snippet from our button config file...

for the admins: (Extensions have been edited for security)

[SIP/E0XXXXXXXXXX_1]
type=extension
label=JT 3888
context=admin_sets
extension=3888
mailbox=3888@xxxx
extenvoicemail=*213888@user_services

[SIP/E0XXXXXXXXXX_1]
type=extension
label=15th Board Room 3385
context=executive_sets
extension=3385
mailbox=@
extenvoicemail=*87@user_services
group = Vancouver

[SIP/E0XXXXXXXXXX_1]
type=extension
label=15th Floor Copy Room 3402
context=executive_sets
extension=3402
mailbox=@
extenvoicemail=*21@user_services
group = Vancouver

For regular users:

[SIP/E0XXXXXXXXXX_1]
type=extension
label=15th Board Room 3385
context=executive_sets
extension=3385
mailbox=@
extenvoicemail=*87@user_services
privacy=none
group = Vancouver

[SIP/E0XXXXXXXXXX_1]
type=extension
label=15th Floor Copy Room 3402
context=executive_sets
extension=3402
mailbox=@
extenvoicemail=*21@user_services
privacy=none
group = Vancouver

[SIP/E0XXXXXXXXXX_1]
type=extension
label=16th Floor Admin 3408
context=executive_sets
extension=3408
mailbox=@
extenvoicemail=*21@user_services
privacy=none
group = Vancouver

]]>http://localhost:4567/post/1824http://localhost:4567/post/1824Fri, 04 Mar 2016 19:15:01 GMT<![CDATA[Reply to Privacy Options on Thu, 03 Mar 2016 11:52:19 GMT]]>What FOP2 version are you using? How does your button config file looks like ?

]]>http://localhost:4567/post/1823http://localhost:4567/post/1823Thu, 03 Mar 2016 11:52:19 GMT<![CDATA[Reply to Privacy Options on Thu, 25 Feb 2016 19:25:45 GMT]]>I have created several panel contexts that use different button config files. One file, contains the privacy=clid option for all extensions, and another file for admins that contain no privacy options. However, when an admin opens FOP2, he can't see any caller id's or call numbers, if I take out the privacy option in the first file, then the admins can see the numbers. It's behaving like the setting in the first file overrides the 2nd file. Can you let me know what I'm doing wrong? Thanks.

]]>http://localhost:4567/post/1822http://localhost:4567/post/1822Thu, 25 Feb 2016 19:25:45 GMT<![CDATA[Reply to Privacy Options on Wed, 19 May 2010 19:05:17 GMT]]>Thank you for the quick reply, will look into that further. Really like the FreePBX addon and hope that it continues to be developed/enhanced to support all of the functionality! Very nice job with the program!

]]>http://localhost:4567/post/1821http://localhost:4567/post/1821Wed, 19 May 2010 19:05:17 GMT<![CDATA[Reply to Privacy Options on Wed, 19 May 2010 15:17:42 GMT]]>You will have to use panel contexts. But there is no visual tool to configure panel contexts, you will have to configure by hand or come up with your own scripts. Panel context are described in the documentation. One context button config is separate from another context button config, so you can have an administration context with no privacy options, and a support context with privacy.

Best regards,

]]>http://localhost:4567/post/1820http://localhost:4567/post/1820Wed, 19 May 2010 15:17:42 GMT