No activity of DAHDI

quackers82quackers82
in Support
Installed my licence key, edited the fop2.cfg to allow the custom buttons file.

In my buttons.cfg i have

[DAHDI/1]
type=trunk
label=DAHDI
channel=DAHDI/2
channel=DAHDI/3
channel=DAHDI/4

restarted the fop2 service, i login i get my custom buttoms layout, and the extentions activity show but no trunk activity.

Why is the activity on the trunks not showing? :(

Comments

  • nicolasnicolas
    Most probably because the channel names do not match, try

    asterisk -rx "core show channels"

    While you have some calls up, how are the channels named?

    1) DAHDI/1-1
    2) DAHDI/i1-1

    If option 2, then you have to add the i to the channels in your button config file. If 1, then it must work.

    Best regards,
  • joe1981alAPRjoe1981alAPR
    Just in case others are looking. I'm using an Xorcom Astribank w/ 2 PRI channels and 8 FXO / 8 FXS. My two configured trunks are the PRI channels.

    In the new FOP2 manager, under button config, trunks, I had to input info in the "Extra Channel" field to get the DAHDI channels to show.

    It was detected by FOP2 as DAHDI/g1 and DAHDI/g2. In Extra Channel I added "DAHDI/i1" and "DAHDI/i2" respectively and it now works.
Sign In or Register to comment.

© Asternic Corp 2024