Trunks not showing any data
I'm using FreePBX 2.9.0.7 on 10.0.0.25
FOP2 Basic White Label
I have 10 POTs lines plugged into a Sangoma A-200 card.
The lines are broken down into 3 separate Zap trunks in DAHDI compatibility mode. Each trunk is using a different Zap identifier g0, g1, and g2.
The three trunks are showing up on the FOP2 screen, but no data ever populates the boxes when people call in or out.
On FOPv1 I am able to see each DAHDI trunk, and it shows the incoming and/or outgoing number.
On FOP2 it shows up as 3 separate boxes. On FOP1 it is 10 separate trunks.
Any idea what I should do to fix this? I can provide as much information as you want.
Thanks!
FOP2 Basic White Label
I have 10 POTs lines plugged into a Sangoma A-200 card.
The lines are broken down into 3 separate Zap trunks in DAHDI compatibility mode. Each trunk is using a different Zap identifier g0, g1, and g2.
The three trunks are showing up on the FOP2 screen, but no data ever populates the boxes when people call in or out.
On FOPv1 I am able to see each DAHDI trunk, and it shows the incoming and/or outgoing number.
On FOP2 it shows up as 3 separate boxes. On FOP1 it is 10 separate trunks.
Any idea what I should do to fix this? I can provide as much information as you want.
Thanks!
Comments
You must use the fop2admin freepbx module, go to Tools - 3rd Party - Fop2 Buttons, scroll down to the trunk buttons and specify the channel range for each of your groups.