SCCP phones support
-
Hello all!
We recenly purchased FOP2 Full version and found that panel don`t correcly show status of SCCP phones.
We use asterisk 11 and chan_sccp_b module for our Cisco 79xx (more than 30) phones.
Then phone is offline (disconnected from network) status in panel is online and never changed.
All other features, such as transfer, display phone status (lines, etc) working correcly.I don`t now this is bug or feature request (i think than with chan_skinny behaviour is the same).
Thanks for reply. -
I do not know if skinny fires any event for a phone being on or off line. As I do not have any phones myself to test I cannot tell you either, but you can run fop2 in debug mode and capture events, so I can look into them and see if there is anything that can be done.
service fop2 stop
cd /usr/local/fop2
script capture.log
./fop2_server -X 1
(log into fop2, then make a phone available or unavailable)
ctrl-C
exit
service fop2 startAt that point you have the capture.log file with AMI events related to your environment. You can send that to me telling me what phone got offline or online that was not shown in the fop2 display, so I can trace for related events and see if this can be added as a new feature or not (lack of events means fop2 won't be able to tell the change of status)
Best regards,
-
Events after off phone 1342:
127.0.0.1 <- Event: PeerStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Timestamp: 1384775220.353184
127.0.0.1 <- ChannelType: SCCP
127.0.0.1 <- ChannelObjectType: DeviceLine
127.0.0.1 <- PeerStatus: DETACHED
127.0.0.1 <- SCCPDevice: SEP1CAA07E2A4D7
127.0.0.1 <- SCCPLine: 1342
127.0.0.1 <- SCCPLineName: �ени� ��ликов
127.0.0.1 <- SubscriptionId:
127.0.0.1 <- SubscriptionName:
127.0.0.1 <- Server: 0127.0.0.1 <- Event: DeviceStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Timestamp: 1384775220.353880
127.0.0.1 <- ChannelType: SCCP
127.0.0.1 <- ChannelObjectType: Device
127.0.0.1 <- DeviceStatus: UNREGISTERED
127.0.0.1 <- SCCPDevice: SEP1CAA07E2A4D7
127.0.0.1 <- Server: 0127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Timestamp: 1384775220.358130
127.0.0.1 <- Exten: 1342
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Hint: SCCP/1342&Custom:DND1342
127.0.0.1 <- Status: 4
127.0.0.1 <- Server: 0Events after on phone: 1342
127.0.0.1 <- Event: DeviceStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Timestamp: 1384775367.905977
127.0.0.1 <- ChannelType: SCCP
127.0.0.1 <- ChannelObjectType: Device
127.0.0.1 <- DeviceStatus: PREREGISTERED
127.0.0.1 <- SCCPDevice: SEP1CAA07E2A4D7
127.0.0.1 <- Server: 0127.0.0.1 <- Event: PeerStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Timestamp: 1384775368.887042
127.0.0.1 <- ChannelType: SCCP
127.0.0.1 <- ChannelObjectType: DeviceLine
127.0.0.1 <- PeerStatus: ATTACHED
127.0.0.1 <- SCCPDevice: SEP1CAA07E2A4D7
127.0.0.1 <- SCCPLine: 1342
127.0.0.1 <- SCCPLineName: �ени� ��ликов
127.0.0.1 <- SubscriptionId:
127.0.0.1 <- SubscriptionName:
127.0.0.1 <- Server: 0127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Timestamp: 1384775368.887237
127.0.0.1 <- Exten: 1342
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Hint: SCCP/1342&Custom:DND1342
127.0.0.1 <- Status: 0
127.0.0.1 <- Server: 0127.0.0.1 <- Event: DeviceStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Timestamp: 1384775369.125328
127.0.0.1 <- ChannelType: SCCP
127.0.0.1 <- ChannelObjectType: Device
127.0.0.1 <- DeviceStatus: REGISTERED
127.0.0.1 <- SCCPDevice: SEP1CAA07E2A4D7
127.0.0.1 <- Server: 0 -
Strange, as any PeerStatus that is not "Registered" or "Reachable" is marked as unregistered. I have added "ATTACHED" to the "ok" states, but the detached status should fall into the unregistered/notok events as it is not either registered or reachable, and thus the button should be grayed out.
-
-
I have added "ATTACHED" to the "ok" states,
Where i can download latest version of FOP2 for check this (we use 2.26 from official site).Unless the PeerStatus is not fired when the phone is unplugged, but when you request status...
Im wait this messages on console output and dont click anything after phone on/off.What additional information needed for resolve this?
-
http://download.fop2.com/fop2-2.27j-centos-i386.tgz
http://download.fop2.com/fop2-2.27j-centos-x86_64.tgzI do not need more information... anyways, without the ATTACHED addition, the PeerStatus with DETACHED should result in a greyed out button anyways. Not sure why it did not work in your case. You can try the above version and see how it goes. If there are still problems, you will have to capture complete output when running fop2_server in debug level 1 and send that to me so I can rerun those events through and see how fop2 reacts to them.
Best regards,
-
Thanks for reply!
I
m upgrade 2.26->2.27j (x86_64) and nothing changed. Because im cannot find how to attach the debug output here, i put it on online storage:
[url:3t852f4o]http://rapidshare.com/share/4BB2F210D5B5DB0D87FBBCD7E5F31410[/url:3t852f4o]Some comments to debug (-X 1):
phone 1384 off and never on - incorrectly show in FOP2
phone 1342 off and on then debug is collected (comments marked in log OFF and ON).Also (i
m already read other topics) UTF-8 (russian language support) in my configuration is broken after upgrade. Phone labels is showing as: label=Бехер Вера instead of Russian characters. Im attached screenshot to debug logs.
Its perfectly work in 2.26 without SET NAMES and other 'hacks'. UTF-8 in my configuration stored in FreePBX database with default settings (collate latin-1) and correctly showed by fop2. Im try different things (SET NAMES and other), but cannot find the solution (i can create another topic if needed).Many thanks for future reply.
-
-
I cannot make any updaes as I do not have SCCP phones, for what I see on your events, fop2 should work correctly. The problem is that I do not know if those events happen when they are supposed to happen (when you unplug or turn onn/off a phone). contact me via the live help, as the only way to know that is by working on your actual system. I am online now if you want to chat.
Best regards,
-
-
If it would be of use in FOP2 development, I'd happily contribute a SCCP deskset for testing, etc. My intention is to keep our SCCP extensions on CME, but support in FOP2 for SCCP presence info is quite desirable.
-
If it would be of use in FOP2 development, I'd happily contribute a SCCP deskset for testing, etc. My intention is to keep our SCCP extensions on CME, but support in FOP2 for SCCP presence info is quite desirable.
SCCP registration/presence support was tweaked/fixed already. You can install FOP 2.27 and see extension buttons greyed out if they are not plugged in/registered into asterisk. I do not have any idea on how to integrate that with CME? I do not think FOP2 will work besides or outside the asterisk manager (AMI), as FOP2 does not talk sccp, it just talks to asterisk via AMI.
Best regards,
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login