FOP2 Community Forum

Well it took me some time too look at it again, but yes finally I found the problem. I think I have not done it properly in the first place as I have not imported the table before updating FOP2. But I discovered some more problems e.g. regular segfaults on debian 12 and a few php8.2 (freepbx17) deprecations with caused this error and others like plugins in the admin not showing up properly. I put a modified / adapted version of fop2 on github. It's split between webroot for php files and server/systemd It' here : https://github.com/schiffsratte/fop2-modernize

Since it worked on the old server, I'd check the AMI connection and credentials first. After a server migration, that's often the culprit. Have you also tried restarting the Wallboard service after verifying the configuration?

The Live Chat Bot is useless and cannot get me to a human, but also does not know how to get me to a human. It keeps saying to check the Portal, but there's nothing on the Portal for support. I need to get my Licence Code revoked. I cannot do it on the old VPS as it is dead. I cannot do it on the Portal as it claims I've done it 4 times or something. Can someone please help me?

I should mention that FOP2 is running on FreePBX 15.

Aca esta funcionando haciendo proxy reverso con nginx server { listen 4440 ssl http2; server_name tudomino.com; root /var/www/html/; ssl_certificate "/certificado.crt"; ssl_certificate_key "/certificado.key"; ssl_session_cache shared:SSL:1m; ssl_session_timeout 10m; ssl_ciphers HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; location / { proxy_pass http://127.0.0.1:4445; proxy_http_version 1.1; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection "upgrade"; } error_page 404 /404.html; location = /40x.html { } error_page 500 502 503 504 /50x.html; location = /50x.html { } } map $http_upgrade $connection_upgrade { default upgrade; '' close; } En el archivo de configuracion de FOP2 usr/local/fop2/fop2.cfg deshabilita el certificado SSL. listen_ip = 127.0.0.1 listen_port = 4445 sslproxy=1 proxy_port=4440 Con esto debe funcionar haciendo offloading SSL en el nginx cambiando el wss a ws internamente. Saludos,

We have listen/whisper set up on FreePBX. Panel Manager version 1.2.4. When a user is listening into a call, is there a visual indicator to show this?

Fresh install of freepbx version 17.0.28 with FOP2 2.31.50, presence manager installed but doesn't seem to be changing extensions to DND.

you can use edge, there is an extension/addon for edge and works fine there.

Did you ever find a solution for this? I'm in the same situation, setup the sangoma phone app for PC, doing some testing before rolling it out and they do not show active on the panel even when adding the extra channel

Greetings! We'd love to hear your opinion. Leave your suggestions, it's important to us. http://tr35.ru/bitrix/redirect.php?event1=&event2=&event3=&goto=https://mature-ptv.com/c/slave/ http://vladtv.ru/bitrix/rk.php?goto=https://mature-ptv.com/c/vietnam/ http://pinkycar.ru/bitrix/redirect.php?event1=&event2=&event3=&goto=https://mature-ptv.com/c/creampie/ http://www.hannobunz.de/url?q=https://mature-ptv.com/c/skirt/ http://diskont-foto.ru/bitrix/rk.php?goto=https://mature-ptv.com/c/striptease/

fop2 not loading and times out but fop2 manager loads fine I am running FreePBX 16.0.45 fop2 Version: 2.31.29 Panel Server Status: OK I rebooted the FreePBX server and Reloaded the fop2 Panel but nothing is working. How do I fix?

Hi Dears We have FOP2 V.2.31.49 with FreePBX 16.0.41.4 and Astrisk 20.4.0 fop2.service restarted every 80 Seconds. Every 80 Seconds FOP2 panel in user side will disconnected and after 5 seconds it will reconnect. but every Caller ID in User panel will lost. Dec 11 19:41:54 freepbx.sangoma.local systemd[1]: Starting Flash Operator Panel 2... Dec 11 19:43:25 freepbx.sangoma.local systemd[1]: fop2.service start operation timed out. Terminating. Dec 11 19:43:25 freepbx.sangoma.local systemd[1]: Failed to start Flash Operator Panel 2. Dec 11 19:43:25 freepbx.sangoma.local systemd[1]: Unit fop2.service entered failed state. Dec 11 19:43:25 freepbx.sangoma.local systemd[1]: fop2.service failed. Dec 11 19:43:30 freepbx.sangoma.local systemd[1]: fop2.service holdoff time over, scheduling restart. Dec 11 19:43:30 freepbx.sangoma.local systemd[1]: Stopped Flash Operator Panel 2. Dec 11 19:43:30 freepbx.sangoma.local systemd[1]: Starting Flash Operator Panel 2... Dec 11 19:45:00 freepbx.sangoma.local systemd[1]: fop2.service start operation timed out. Terminating. Dec 11 19:45:00 freepbx.sangoma.local systemd[1]: Failed to start Flash Operator Panel 2. Dec 11 19:45:00 freepbx.sangoma.local systemd[1]: Unit fop2.service entered failed state. Dec 11 19:45:00 freepbx.sangoma.local systemd[1]: fop2.service failed. Dec 11 19:45:05 freepbx.sangoma.local systemd[1]: fop2.service holdoff time over, scheduling restart. Dec 11 19:45:05 freepbx.sangoma.local systemd[1]: Stopped Flash Operator Panel 2. Dec 11 19:45:05 freepbx.sangoma.local systemd[1]: Starting Flash Operator Panel 2... Dec 11 19:46:36 freepbx.sangoma.local systemd[1]: fop2.service start operation timed out. Terminating. Dec 11 19:46:36 freepbx.sangoma.local systemd[1]: Failed to start Flash Operator Panel 2. Dec 11 19:46:36 freepbx.sangoma.local systemd[1]: Unit fop2.service entered failed state. Dec 11 19:46:36 freepbx.sangoma.local systemd[1]: fop2.service failed. Dec 11 19:46:41 freepbx.sangoma.local systemd[1]: fop2.service holdoff time over, scheduling restart. Dec 11 19:46:41 freepbx.sangoma.local systemd[1]: Stopped Flash Operator Panel 2. Dec 11 19:46:41 freepbx.sangoma.local systemd[1]: Starting Flash Operator Panel 2... Dec 11 19:48:11 freepbx.sangoma.local systemd[1]: fop2.service start operation timed out. Terminating. Dec 11 19:48:11 freepbx.sangoma.local systemd[1]: Failed to start Flash Operator Panel 2. Dec 11 19:48:11 freepbx.sangoma.local systemd[1]: Unit fop2.service entered failed state. Dec 11 19:48:11 freepbx.sangoma.local systemd[1]: fop2.service failed. Dec 11 19:48:16 freepbx.sangoma.local systemd[1]: fop2.service holdoff time over, scheduling restart. Dec 11 19:48:16 freepbx.sangoma.local systemd[1]: Stopped Flash Operator Panel 2. Dec 11 19:48:16 freepbx.sangoma.local systemd[1]: Starting Flash Operator Panel 2...

We have the same problem. The Exact Refresh time and socket reset is 80 seconds. Every 80 Seconds FOP2 panel in user side will disconnected and after 5 seconds it will reconnect. but every Caller ID in User panel will lost.

Thanks a lot, this worked for me. The first step was not necessary. The service does keep restarting but the web pages are not refreshed on each restart so it is fine.

Finally rebuilt our phone system, coming from Elastix 2.5. I got FOP2 running and registered... but every few minutes, I get the One Moment Please. It takes a try or two and reconnects. The service appears to be restarting on it's own. What logs can I review to troubleshoot?

Updated a FreePBX 15 / Asterisk 18.26.4 server to a new FreePBX 17 / Asterisk 22.5.2 setup. I installed a new FOP2 license and then used the instructions at https://www.asternic.net/docs/knowledgebase/migrate_fop2_config/ to move the FOP2 configuration to the new server. When we run the import command on the new server, we get an error. Importing groups PHP Fatal error: Uncaught mysqli_sql_exception: Field 'context_id' doesn't have a default value in /var/www/html/fop2/lib/dblib.php:96 Stack trace: #0 /var/www/html/fop2/lib/dblib.php(96): mysqli_query() #1 /usr/src/fop2/server/import_fop2_configs.php(107): dbcon->consulta() #2 /usr/src/fop2/server/import_fop2_configs.php(385): import_groups() #3 /usr/src/fop2/server/import_fop2_configs.php(21): main() #4 {main} thrown in /var/www/html/fop2/lib/dblib.php on line 96 Any suggestions on getting the config import to work, or do we need to rebuild the configs from the GUI?

I'm using version 2.31.48 and the issue is still in place. No remove from queue.

Hi, I got the paid plugin Queue Login and all looks OK but it's not working, even though I have enabled auto login etc. I played around with various setting combinations but non work. I'm using Panel Server Status: OK - Version: 2.31.47 Anybody have any idea or can help? [image: zk6c9d9ylaqk.png] You help is much appreciated.

Hi everyone, new here and desperately need advice. I have a tampered call recording from a Holiday Tour Operator, a spectragram analysis has been done, from the image is this horizontal bar normal? This section of the recording has a long bleep, I believe where some content was removed, thanks for your feedback [image: wncm3afja5fo.jpeg]