Another login problem
Hi
I've installed FOP2 under elastix on Centos 64 bit, also freepbx fop2 module
without problems
Configured manager connection (from freepbx interface), and purchased fop2 license
Of course, I've disabled fop2
then on 4445 port is running fop2
Also, I don't have firewall rules for tcp 4445 traffic (fop1 was working without problems on 4445 before install fop2)
Others settings
How ever, I can't login to web fop2 interface.
I've setup user 302 with password 302 (from fop2 freepbx web admin module)
this is my fop2.cfg
If I run fop2 on debug mode
I get a lot of info...
when I try to login , I get this:
I've installed FOP2 under elastix on Centos 64 bit, also freepbx fop2 module
without problems
Configured manager connection (from freepbx interface), and purchased fop2 license
[root@jorju ~]# /usr/local/fop2/fop2_server --test
Flash Operator Panel 2 - Valid License (1)
Connection to manager OK!
Of course, I've disabled fop2
[root@jorju ~]# grep FOPRUN /etc/amportal.conf
# FOPRUN: set to true if you want FOP started by freepbx_engine (amportal_start), false otherwise
FOPRUN=false
then on 4445 port is running fop2
[root@jorju ~]# netstat -lnp | grep 4445
tcp 0 0 0.0.0.0:4445 0.0.0.0:* LISTEN 23275/fop2_server
Also, I don't have firewall rules for tcp 4445 traffic (fop1 was working without problems on 4445 before install fop2)
Others settings
cat /etc/asterisk/sip_general_custom.conf
[testqueue]
eventwhencalled=yes
How ever, I can't login to web fop2 interface.
I've setup user 302 with password 302 (from fop2 freepbx web admin module)
this is my fop2.cfg
[general]
; AMI definitions
manager_host=localhost
manager_port=5038
manager_user=fop2
manager_secret=fop2414243
;event_mask=agent,call,command,system,user,dialplan
; Daemon definitios
listen_port = 4445
;restrict_host = http://www.asternic.org
;web_dir = /var/www/html/operator/fop2
; Global Config
poll_interval = 86400
poll_voicemail = 1
monitor_ipaddress = 0
; Force blind transfer on asterisk 1.6
blind_transfer = 1
; Force supervised transfer on asterisk 1.4
; requires the atxfer manager backport patch
; supervised_transfer = 1
; Force delimiter for asterisk applications
; force_parameter_delimiter = ","
; When adding or removing members to a queue, fop2 will default to
; AddQueueMember/RemoveQueueMember commands. If you set use_agentlogin
; to 1, together with the QueueChannel in a button definition set to
; an Agent number it will use AgentCallbackLogin and Agentlogoff instead.
;
; use_agentlogin = 0
; Master Password that overrides any individual one
;master_key = 5678
; Options to send to chan_spy when doing a Listen action
; This global setting is overriden by the individual button
; spyoptions directive if set (in the button config).
; Asterisk 1.6.1 or higher has the option "d" that lets you
; switch spying modes using the keypad:
;4 = spy mode
;5 = whisper mode
;6 = barge mode
spy_options="bq"
; Options to send to chan_spy when doing a Whisper action
; In Asterisk 1.6.1 or higher you can use B to enable barge (speak
; to both channels on a call).
whisper_options = "w"
; When you spy to an ongoing call, your spy session will end as
; soon as the conversation you are listening to finishes. If you
; rather keep the chan spy session open after the call end, uncomment
; the following line.
;persistent_spy=1
; Filename to use when start monitoring, you can use ${UNIQUEID},
; ${ORIG_EXTENSION}, ${DEST_EXTENSION}
; and date formats %Y %m %d to construct the filename.
;
; Settings for modifying the recording filename
; Available variables are:
; ${UNIQUEID} = Unique Id of the call
; ${TIMESTAMP} = Unix Timestamp when the recording was initiated
; ${CLIDNUM} = Callerid or Dialed number for the active call
; ${CLIDNAME} = Callerid name for the active call
; ${DEST_EXTENSION} = Target extenstion being monitored
; ${ORIG_EXTENSION} = Extension/User that started the recording (not
; the other leg)
; ${MBOX} = Mailbox of the extension/user that startend the
; recording
;
; Date variables:
; %Y 4 digits year
; %y 2 digits year
; %m 2 digits month
; %d 2 digits day
; %h 2 digits hour
; %i 2 digits minute
; %s 2 digits seconds
; For elastix Monitoring Tab:
; monitor_filename=g${DEST_EXTENSION}-${UNIQUEID}
; For fop2 recording interface
monitor_filename=/var/spool/asterisk/monitor/${ORIG_EXTENSION}_${DEST_EXTENSION}_%h%i%s_${UNIQUEID}
monitor_format=wav
monitor_mix=true
; To enable the recording interface you must uncomment the following
; line, but also you might need to modify the script a little bit
; depending on the sox version you have installed.
;
;monitor_exec=/usr/local/fop2/recording_fop2.pl
; You could specify your own script to be executed when the recording
; is finished. It will receive 3 parameters, the complete
; path and filename of the IN leg, the OUT leg and the final
; recording NAME. You should run soxmix in your script to join
; the recordings into one file.
;
; monitor_exec=/var/lib/asterisk/bin/postrecording-script.sh
; FOP2 can fire notifications/popups when an extension or queue
; member receives a call. The default behaviour is to show a
; notification on state RINGING (notify_on_ringing=1).
;
; To customize notifications, you must uncomment the custom_popup
; function in checkdir.php you can replace that notification with
; a custom popup function to integrate with other web applications.
;
; For call centers you might need to perform a popup not on the
; RINGING state but when the call is CONNECTED to an agent. If you
; set in the queue configuration in queues.conf the option
; eventwhencalled=yes and then set here notify_on_connect=1,
; fop2 will send notifications on queue connected calls
; during AGENTCONNECT events. This will only work for inbound calls
; from a queue.
;
; notify_on_ringing = 1
; notify_on_connect = 1
; Call pickup uses the pickupmark variable by default. In multi tenant
; systems this might lead to problems as you might end un picking up
; some other tenant call. In that case you might want to try to
; pickup the call by its context uncomenting the following line:
;
; no_pickupmark=1
; Path to your voicemail directory
; For voicemail to work the fop2 server must run on the same server
; as asterisk, or your voicemail directory must be network mounted
voicemail_path=/var/spool/asterisk/voicemail
; By default IM chats are not logged/saved. If you uncomment
; the following parameter, all chats will be stored on the chatlog
; table inside the fop2settings.db sqlite database.
;
; save_chat_log=1
; Khomp GSM interface to send SMS messages
; If there is a card plugged, fop2 will auto discover it
; and use the first one available. If you want to change it
; to a fixed one, uncomemnt the folowing line and change the name
; to your liking
;
; khomp_gsm=Khomp/b0
; --- SAMPLE GROUPS ---
; group=queues:QUEUE/100,QUEUE/101
; group=deptA:SIP/100,SIP/101,SIP/102
; --- END SAMPLE ---
; --- SAMPLE USER LIST ---
; format: user= EXTENSION : SECRET : PERMISSIONS : GROUPS
; You can enumerate several permissions and groups separated by comma
; available permissions: 'all', 'dial', 'hangup', 'meetme', 'pickup',
; 'record', 'spy', 'transfer', 'whisper',
; 'queuemanager', 'queueagent', 'phonebook',
; 'chat', 'preferences', 'hangupself',
; 'recordself', 'voicemailadmin'
;
; user=620:1234:all:queues
; user=621:1234:dial,transfer,pickup:deptA
; user=622:1234:all
; user=623:1234:meetme,pickup
; buttonfile=buttons.cfg
;
END SAMPLE
; This line is NOT commented, it executes
; the autoconfig configuration for FreePBX
#exec autoconfig-users-freepbx.sh
If I run fop2 on debug mode
/usr/local/fop2/fop2_server -X 511
I get a lot of info...
when I try to login , I get this:
** MAIN New client connection 190.176.223.25
** MAIN AMI event received...
** MAIN Processing command received from flash clients...
190.176.223.25 <= <msg data="GENERAL|contexto|1|" />
-- PROCESS_FLASH_COMMAND origen GENERAL accion contexto destino 1 password
190.176.223.25 => { "btn": "0", "cmd": "key", "data": "rM7TxbVHTeHjTneG4l", "slot": "" }
190.176.223.25 => { "btn": "0@GENERAL", "cmd": "version", "data": "2.22!Jorgu!1", "slot": "" }
** MAIN AMI event received...
** MAIN Processing command received from flash clients...
190.176.223.25 <= <msg data="1|auth|302|d218673e1822234266497bf555a190f3" />
-- PROCESS_FLASH_COMMAND origen 1 accion auth destino 302 password d218673e1822234266497bf555a190f3
** RECEIVING AUTH REQUEST for 302
TRYING TO VALIDATE USER 302
VALIDAR USUARIO 302
VALIDAR USUARIO 302 OK con clave regular (190.176.223.25)
** SENDING BUTTONS from GENERAL to client at 190.176.223.25
mi perm all = 0 (0)
190.176.223.25 => { "btn": "0@GENERAL", "cmd": "preferences", "data": "e30=", "slot": "" }
190.176.223.25 => { "btn": "0@GENERAL", "cmd": "vmailpath", "data": "/var/spool/asterisk/voicemail", "slot": "" }
190.176.223.25 => { "btn": "0@GENERAL", "cmd": "permit", "data": "YWxs", "slot": "" }
190.176.223.25 => { "btn": "0@GENERAL", "cmd": "permitbtn", "data": "YWxsITA=", "slot": "" }
190.176.223.25 => { "btn": "75@GENERAL", "cmd": "zbuttons", "data": "pZvBcts2EIbveQr51nbGY2NBiNJBM5Ft2fVUklVLSdPeYAl2mVBkSlGdpONX7qkvUFCiJMK7a8GDW0LTy///SWA/gLR4fzMYD+77w+eHdVnm2fPJsH8xGPZGukh0a2HS1uXJqH87vvy5Px7b49PbydnUzAtTbk64MYXJ5ok+ufwwnd2N+tPZ1UXv8rpxyv6MXz8MPgwu78azwadZ77HIl6d/rc3anMx+nwx65ltpslWSZ/Vp9dWG+Vyn1PXeHwqcZc8Tk+m0/N47fx6Z5YMpxnppmg6ep6UuzW1WmuJRzw1rwiobjKe3d+Meod+RnlS17EXfAcrvUEScn9dpzkxqHvMsWZW6ddoaJmmiM41yrc5/kWN1yDM4Wp9k7u8gTRaUAoEViIBbZ3/b41ZtxFA3qbp4M0/BuIwYlzOzygtT/Es5BewUgpyCh9O9INotOG6BcauOubXP2H3+jX7EJLYtg2zLt9jeK6P9S8e/ZPy3Gf/iPCIMR9hwFGQ48jBsz6IdRo7DiHEY07PKx7vby4F1OOz9JM7V+4V51Ou0rN1fm4UpknlORKBwBCooAuURwU4PnYNyclCV6OHF3ade0xedTYe5+/Ws2prop3xFhNDBIXSCQuh4hOCIopPoOEl0GNddxvUkT9Ok1Cs7sG70Q5GYlBr0Xey9G+S96+GdkEYn0HUS6DIJiPPjEUx0aR+5hIhA4NYqvFsrFYGV86YIdtLICKyURgSVVjoCwUUwuJ9W17DPmrFXJOzjvi6C+rrw6esvZNHWnQ4vuA4vMGhtrd9mT62RThdJlhCoKgRu8yKozQufNu+Iom07rV5wrV5w/HaZL78W9YP1kOZ2hBX6O2Eft3sR1O6FT7snxdExOB1fcB1fcIBXBT0xi4LoegI3fhHU+IVP498Lou067V9w7V9whIcXLYRv3O1FULcXPt0eK6MDcPp+JZUOgEO8w5M12i7tdLE0GRFCG4fQDgqh/abnvqmODqLtBNHmgsAk+DKI6zSvV6g4hRinEAelEL8phb00OoLYiSDmIuCA77r/qfVDFMenUbsrfyTcY+ITQcQnfIjPVUUbd5BPcMgnOObr25+StxtjngjCPOGDeVs1tFGH7ARHdsCR3ViXtFPANAdBNAc+NFfLIa2CQ3DAERxwBDfVqW4VZp1ZhYZYvgAGOAgCOPABOFcVbdzhN+D4DTh+s2cIAMIwBjcIAjfwAbetGtqoQ2zAERtwxHafLxNqRwYwokEQooEPom3V0EYdJgOOyYBjsqF+yAtd5kVCUBlgKoMgKgMfKmtIoi07XAYclwHHZSP9RO2mAkYxCEIx8EGxjRjapkNfwNEXcPS13VIfpIZ8jjFyQRBygQ9yNSTRlh3OAo6zgOOszYQQE24xWkEQWoEPWm3V0EYdmgKOpoCjqdtsvn7Q8+Q/gqYBkxQEkRT4kNRBEW3YoSjgKAo4inp9msIoBUEoBT4odXSacngKOJ6SHE816rc+6vk60wRpSMxWMoitpA9bEdLICKTDWZLjLMnulN3fXVWv4Eye6WJB3HmJQUsGgZb02ilzZdHWHdKSHGlJjrTqa0zzRwqpJeYtGcRb0oe3mppo0w51SY66JEddo/54VgW7TqhHHcOIDIIR6QMjDUm0ZQdGJAcjkuOvuv7ALlUoz5hJZBCTSC8maWiiTTtoIjk0kRyB9dNkabIyr/Ze8jQxGcVjEiOKDEIU6YMohDQ6AgdVJIcqkqOzxnUu7Lot+4dKAGOLDMIW6YMtWBkdgIMwkkMYybHaJC/sKeTkhgFGBgGM9AGYnR7arIMvksMXyfHaYLGuOkXrI3arcAtTQS1MeX3EsRNE2lVO81Js8/J4z7l9pzA2xd/E7rfCbUwFtTHl1cZIdXQQTkNTXEOLPN52XpnCfCEiwF1NBXU15dPVXuqizTutTXGtLTrynnNodEa+81G4uamg5qZ8mpurijbutDfFtbeIZbftJa50lpiU8I0bmwpqbMqnsTmiaNtOS1NcS4s4ers6rd6h2KZJbDgAfqcNQe+0weuddkMSZRmc99nAvs+OOHqz9afmQa/KROOVOODNQgjaLASvzcKmJtK0s2UI7JZhxNHbVYVG2WdDGEaTGQTtF4LXfuFOD202csyykxjHaVWa1b76Wes32zAJy2gwQ9BGGnhtpLmqaONtxzg7mjk+s5e4W+oCO8ZrTwhae4LX2rOWQ1p1lp3ALjsjjs5s7atEL/OMuL941QlBq07wWnUeFNGGnYeaXXRGHJ/Z8sP8KbFTxJyYqvHCC4IWXuC18Gpqok07DzS74lIci217wRNlGK2zIGidBV7rrJ0e2mzsmOVWV4pjr8958YQnaIm/GJdBX4xLry/GN2Iom9L5YlyyX4wr5sP9xie28hxefGK71PNp/lhO/swzKgk0i8mgL8ql1xflTU10IOAEAvtPbZv+mJA4Lpv073852/1uMwjnB69a/6qLL/vLVv8xC2s6Xb1TmIwO+rvd7m79m5WFtkJXN4V2iXhz2bPqzFcFbP+5+6m9E9sfWgEcpfzRr/bgnWvVh169UFmssy/vFIcDVQmJih6Burom12mrClion06upVUVIlTzSOOqa3JdYxMfDtSnZpublKsKCtU8sgqsa3JzX1UhRjWPTOh1TW5Jt3FKmPdzz43MqkQbFT3Sa+ua3JKkqtBBNY/sn9U12S8Zqz/Buh0JNI1uDvpU5sZTXQR/UrI56FOZG1VVkajbiWOBZe+O+9TnRtihDha/O+5TnxtthzqSqe8168TcyDvUwX+HszvuU5/9RmpfRzH1vUZ5zI3IQ502U99rHMXc2DzUwR8U7I771OfG6aFOh6nvNWb/Bw==", "slot": "" }
190.176.223.25 => { "btn": "0@GENERAL", "cmd": "notionline", "data": "52", "slot": "0" }
** MAIN AMI event received...
** MAIN Processing command received from flash clients...
190.176.223.25 <= <msg data="1|ping||" />
-- PROCESS_FLASH_COMMAND origen 1 accion ping destino password
190.176.223.25 => { "btn": "0", "cmd": "pong", "data": "PGRpdiBpZD0iI3tpZH0iPjxhIGhyZWY9Imh0dHA6Ly93d3cuZm9wMi5jb20iPkZPUDI8L2E+IC0gVmVyc2lvbiA8c3BhbiBpZD0iZm9wdmVyc2lvbiI+I3t2ZXJzaW9ufTwvc3Bhbj4gLSBMaXRlIFZlcnNpb24gLSBMaW1pdGVkIHRvIDE1IGV4dGVuc2lvbnMgLiBCdXkgaXQgPGEgaHJlZj0iaHR0cDovL3d3dy5mb3AyLmNvbS9idXkucGhwIj5ub3c8L2E+IGZvciB1bmxpbWl0ZWQgZXh0ZW5zaW9ucy4gSWYgeW91IGFscmVhZHkgaGF2ZSBhIGNvZGUgZW50ZXIgaXQgPGEgaHJlZj0iIyIgb25DbGljaz0icmVnaXN0ZXIoKTsgcmV0dXJuIGZhbHNlOyI+aGVyZTwvYT48L2Rpdj4=", "slot": "" }
** MAIN AMI event received...
** MAIN Processing command received from flash clients...
190.176.223.25 <= <msg data="1|ping||" />
-- PROCESS_FLASH_COMMAND origen 1 accion ping destino password
190.176.223.25 => { "btn": "0", "cmd": "pong", "data": "PGRpdiBpZD0iI3tpZH0iPjxhIGhyZWY9Imh0dHA6Ly93d3cuZm9wMi5jb20iPkZPUDI8L2E+IC0gVmVyc2lvbiA8c3BhbiBpZD0iZm9wdmVyc2lvbiI+I3t2ZXJzaW9ufTwvc3Bhbj4gLSBMaXRlIFZlcnNpb24gLSBMaW1pdGVkIHRvIDE1IGV4dGVuc2lvbnMgLiBCdXkgaXQgPGEgaHJlZj0iaHR0cDovL3d3dy5mb3AyLmNvbS9idXkucGhwIj5ub3c8L2E+IGZvciB1bmxpbWl0ZWQgZXh0ZW5zaW9ucy4gSWYgeW91IGFscmVhZHkgaGF2ZSBhIGNvZGUgZW50ZXIgaXQgPGEgaHJlZj0iIyIgb25DbGljaz0icmVnaXN0ZXIoKTsgcmV0dXJuIGZhbHNlOyI+aGVyZTwvYT48L2Rpdj4=", "slot": "" }
** MAIN AMI event received...
** MAIN Processing command received from flash clients...
190.176.223.25 <= <msg data="1|ping||" />
-- PROCESS_FLASH_COMMAND origen 1 accion ping destino password
190.176.223.25 => { "btn": "0", "cmd": "pong", "data": "PGRpdiBpZD0iI3tpZH0iPjxhIGhyZWY9Imh0dHA6Ly93d3cuZm9wMi5jb20iPkZPUDI8L2E+IC0gVmVyc2lvbiA8c3BhbiBpZD0iZm9wdmVyc2lvbiI+I3t2ZXJzaW9ufTwvc3Bhbj4gLSBMaXRlIFZlcnNpb24gLSBMaW1pdGVkIHRvIDE1IGV4dGVuc2lvbnMgLiBCdXkgaXQgPGEgaHJlZj0iaHR0cDovL3d3dy5mb3AyLmNvbS9idXkucGhwIj5ub3c8L2E+IGZvciB1bmxpbWl0ZWQgZXh0ZW5zaW9ucy4gSWYgeW91IGFscmVhZHkgaGF2ZSBhIGNvZGUgZW50ZXIgaXQgPGEgaHJlZj0iIyIgb25DbGljaz0icmVnaXN0ZXIoKTsgcmV0dXJuIGZhbHNlOyI+aGVyZTwvYT48L2Rpdj4=", "slot": "" }
** MAIN AMI event received...
** MAIN Processing command received from flash clients...
190.176.223.25 <= <msg data="1|ping||" />
-- PROCESS_FLASH_COMMAND origen 1 accion ping destino password
190.176.223.25 => { "btn": "0", "cmd": "pong", "data": "PGRpdiBpZD0iI3tpZH0iPjxhIGhyZWY9Imh0dHA6Ly93d3cuZm9wMi5jb20iPkZPUDI8L2E+IC0gVmVyc2lvbiA8c3BhbiBpZD0iZm9wdmVyc2lvbiI+I3t2ZXJzaW9ufTwvc3Bhbj4gLSBMaXRlIFZlcnNpb24gLSBMaW1pdGVkIHRvIDE1IGV4dGVuc2lvbnMgLiBCdXkgaXQgPGEgaHJlZj0iaHR0cDovL3d3dy5mb3AyLmNvbS9idXkucGhwIj5ub3c8L2E+IGZvciB1bmxpbWl0ZWQgZXh0ZW5zaW9ucy4gSWYgeW91IGFscmVhZHkgaGF2ZSBhIGNvZGUgZW50ZXIgaXQgPGEgaHJlZj0iIyIgb25DbGljaz0icmVnaXN0ZXIoKTsgcmV0dXJuIGZhbHNlOyI+aGVyZTwvYT48L2Rpdj4=", "slot": "" }
** MAIN AMI event received...
** MAIN Processing command received from flash clients...
190.176.223.25 <= <msg data="1|ping||" />
-- PROCESS_FLASH_COMMAND origen 1 accion ping destino password
190.176.223.25 => { "btn": "0", "cmd": "pong", "data": "PGRpdiBpZD0iI3tpZH0iPjxhIGhyZWY9Imh0dHA6Ly93d3cuZm9wMi5jb20iPkZPUDI8L2E+IC0gVmVyc2lvbiA8c3BhbiBpZD0iZm9wdmVyc2lvbiI+I3t2ZXJzaW9ufTwvc3Bhbj4gLSBMaXRlIFZlcnNpb24gLSBMaW1pdGVkIHRvIDE1IGV4dGVuc2lvbnMgLiBCdXkgaXQgPGEgaHJlZj0iaHR0cDovL3d3dy5mb3AyLmNvbS9idXkucGhwIj5ub3c8L2E+IGZvciB1bmxpbWl0ZWQgZXh0ZW5zaW9ucy4gSWYgeW91IGFscmVhZHkgaGF2ZSBhIGNvZGUgZW50ZXIgaXQgPGEgaHJlZj0iIyIgb25DbGljaz0icmVnaXN0ZXIoKTsgcmV0dXJuIGZhbHNlOyI+aGVyZTwvYT48L2Rpdj4=", "slot": "" }
Comments
I have seen this when:
1) you use an old fop2 client with a newer server
2) you have a mixed salad for fop1 and fop2 all on some directory instead of a clean /fop2 as packaged in the tarball
3) you have some manual configurations that use non ascii characters and config files are NOT saved in utf8
In any case, you should try to debug on the client side.. one easy test is to try another browser. If you can try chrome or safari, they include a nice javascript console that will give you pointers on what is going on.
Thank for you reply Nicolas, but I'm very frustrated with fop2.
I'm using fop2-2.22-centos5-x86_64.tgz (client and server!)
Also, I'm not using non ascii characters in my config file.
I've tried so many times re-install fop2, and I've tried also fop2-2.11-centos5-x86_64.tgz with same results.
And, now, my license key code not work any more.
I'm very frustred with this setup.
I've purchased another fop2 license for other server, and that server works very well with 2.11 (i386).
All servers are elastix based.
Por favor nicolas dame una mano, ahora ademas de no funcionar el FOP2
tampoco me funciona la licencia!
gracias y espero poder solucionarlo para poder aplicar FOP2 a todos mis
servidores elastix.
Reinstalling will not fix issues (unless you had a very broken install). You have to debug/troubleshoot, Use firebug in firefox or open the javascript console in safari/chrome.
In any case, try to catch me on the live help to sort things out. I will be online most of the day tomorrow..
gracias nicolas, te voy a tener q molestar tambien porque la licencia me dejo de funcionar
(creo que es por tantas pruebas de instalacion / reinstalacion que hice)
I want to try fop2 in my elastix 2.2 (rc3) installation.
I installed FOP2 2.24 via elastix addon manager, the install went fine.
My fop2.cfg:
/usr/local/fop2/fop2_server --test
CLI> manager show connected
netstat -lnp |grep 4445
It seems like everything working fine, but I unable to login via web. I'u using one extension, with it's voicemail passvord.
Ins asterisk database, the fop2user table contains it:
When I started in debug mode, I tried to connect I found this on the console:
/usr/local/fop2/fop2_server -X 511
The version show this:
/usr/local/fop2/fop2_server --version
But in the elastix, the package version is : FOP2 v2-2.24
When I try to log in, it shows:
Connecting to server, attempt number : 1 till 15 and than "System is not available right now"
The elastix (which have asterisk 1.8.7.0) and the fop2 is on the same machine. No firewall, or anything else.
What is the problem? Please anybody help me, because I want to buy it, but if it's not working than I don't want to spend money...
Thanks
Robert
Kernel
Linux(i386)-2.6.18-194.3.1.el5
Elastix
elastix-2.0.0-62
elastix-firstboot-2.0.0-14
elastix-email_admin-2.0.0-23
elastix-system-2.0.0-38
elastix-conferenceroom-0.0.0-10
elastix-asterisk-sounds-1.2.3-1
elastix-vtigercrm-5.1.0-8
elastix-agenda-2.0.0-24
elastix-fax-2.0.0-18
elastix-reports-2.0.0-20
elastix-developer-2.0.0-4
elastix-sugarcrm-addon-5.2.0l-5
elastix-a2billing-1.3.0-4
elastix-addons-2.0.0-19
elastix-pbx-2.0.0-40
elastix-callcenter-2.0.0-14
RounCubeMail
RoundCubeMail-0.3.1-5
Mail
postfix-2.3.3-2.1.el5_2
cyrus-imapd-2.3.7-7.el5_4.3
IM
openfire-3.5.1-2
FreePBX
freePBX-2.7.0-9
Asterisk
asterisk-1.6.2.13-0
asterisk-perl-0.10-2
asterisk-addons-1.6.2.1-0
FAX
hylafax-4.3.9-0rhel5
iaxmodem-1.2.0-1.1
DRIVERS
dahdi-2.3.0.1-3
rhino-0.99.3-2.beta2
wanpipe-util-3.5.14-0
Username IP Address Start Elapsed FileDes HttpCnt Read Write
admin 127.0.0.1 1318966167 0 27 0 08191 08191
admin 127.0.0.1 1318966014 153 26 0 08191 08191
admin 127.0.0.1 1318966004 163 12 0 08191 08191
3 users connected.
[root@elastixhost ~]# tcp 0 0 0.0.0.0:4445 0.0.0.0:* LISTEN 2903/fop2_server
[root@elastixhost ~]# /usr/local/fop2/fop2_server --test/usr/local/fop2/fop2_server --test
Unknown option: test/usr/local/fop2/fop2_server
Flash Operator Panel 2 - Valid License (7)
Connection to manager OK!
Asterisk manager.conf
; AMI - Asterisk Manager interface
;
; FreePBX needs this to be enabled. Note that if you enable it on a different IP, you need
; to assure that this can't be reached from un-authorized hosts with the ACL settings (permit/deny).
; Also, remember to configure non-default port or IP-addresses in amportal.conf.
;
; The AMI connection is used both by the portal and the operator's panel in FreePBX.
;
; FreePBX assumes an AMI connection to localhost:5038 by default.
;
[general]
enabled = yes
port = 5038
bindaddr = 127.0.0.1
[admin]
secret = elastix456
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate
write = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate
#include manager_additional.conf
#include manager_custom.conf
[general]
; AMI definitions
manager_host=localhost
manager_port=5038
manager_user=admin
manager_secret=elastix456
;event_mask=agent,call,command,system,user,dialplan
; Daemon definitios
;listen_port = 4445
;restrict_host = www.asternic.org
;web_dir = /var/www/html/operator/fop2
; Global Config
poll_interval = 86400
poll_voicemail = 1
monitor_ipaddress = 0
; Force blind transfer on asterisk 1.6
;blind_transfer = 1
; Force supervised transfer on asterisk 1.4
; requires the atxfer manager backport patch
supervised_transfer = 1
; Force delimiter for asterisk applications
; force_parameter_delimiter = ","
; When adding or removing members to a queue, fop2 will default to
; AddQueueMember/RemoveQueueMember commands. If you set use_agentlogin
; to 1, together with the QueueChannel in a button definition set to
; an Agent number it will use AgentCallbackLogin and Agentlogoff instead.
;
; use_agentlogin = 0
; Master Password that overrides any individual one
;master_key = 5678
; Options to send to chan_spy when doing a Listen action
; This global setting is overriden by the individual button
; spyoptions directive if set (in the button config).
; Asterisk 1.6.1 or higher has the option "d" that lets you
; switch spying modes using the keypad:
;4 = spy mode
;5 = whisper mode
;6 = barge mode
spy_options="bq"
; Options to send to chan_spy when doing a Whisper action
; In Asterisk 1.6.1 or higher you can use B to enable barge (speak
; to both channels on a call).
whisper_options = "w"
; When you spy to an ongoing call, your spy session will end as
; soon as the conversation you are listening to finishes. If you
; rather keep the chan spy session open after the call end, uncomment
; the following line.
;persistent_spy=1
; Filename to use when start monitoring, you can use ${UNIQUEID},
; ${ORIG_EXTENSION}, ${DEST_EXTENSION}
; and date formats %Y %m %d to construct the filename.
;
; Settings for modifying the recording filename
; Available variables are:
; ${UNIQUEID} = Unique Id of the call
; ${TIMESTAMP} = Unix Timestamp when the recording was initiated
; ${CLIDNUM} = Callerid or Dialed number for the active call
; ${CLIDNAME} = Callerid name for the active call
; ${DEST_EXTENSION} = Target extenstion being monitored
; ${ORIG_EXTENSION} = Extension/User that started the recording (not
; the other leg)
; ${MBOX} = Mailbox of the extension/user that startend the
; recording
;
; Date variables:
; %Y 4 digits year
; %y 2 digits year
; %m 2 digits month
; %d 2 digits day
; %h 2 digits hour
; %i 2 digits minute
; %s 2 digits seconds
; For elastix Monitoring Tab:
; monitor_filename=g${DEST_EXTENSION}-${UNIQUEID}
; For fop2 recording interface
monitor_filename=/var/spool/asterisk/monitor/${ORIG_EXTENSION}_${DEST_EXTENSION}_%h%i%s_${UNIQUEID}
monitor_format=wav
monitor_mix=true
;monitor_exec=/usr/local/fop2/recording_fop2.pl
; You can specify a script to be executed when the recording
; is finished. It will receive 3 parameters, the complete
; path and filename of the IN leg, the OUT leg and the final
; recording NAME. You should run soxmix in your script to join
; the recordings into one file.
;
; monitor_exec=/var/lib/asterisk/bin/postrecording-script.sh
; FOP2 can fire notifications/popups when an extension or queue
; member receives a call. The default behaviour is to show a
; notification on state RINGING (notify_on_ringing=1).
;
; To customize notifications, you must uncomment the custom_popup
; function in checkdir.php you can replace that notification with
; a custom popup function to integrate with other web applications.
;
; For call centers you might need to perform a popup not on the
; RINGING state but when the call is CONNECTED to an agent. If you
; set in the queue configuration in queues.conf the option
; eventwhencalled=yes and then set here notify_on_connect=1,
; fop2 will send notifications on queue connected calls
; during AGENTCONNECT events. This will only work for inbound calls
; from a queue.
;
; notify_on_ringing = 1
; notify_on_connect = 1
; Call pickup uses the pickupmark variable by default. In multi tenant
; systems this might lead to problems as you might end un picking up
; some other tenant call. In that case you might want to try to
; pickup the call by its context uncomenting the following line:
;
; no_pickupmark=1
; Path to your voicemail directory
; For voicemail to work the fop2 server must run on the same server
; as asterisk, or your voicemail directory must be network mounted
voicemail_path=/var/spool/asterisk/voicemail
; By default IM chats are not logged/saved. If you uncomment
; the following parameter, all chats will be stored on the chatlog
; table inside the fop2settings.db sqlite database.
;
; save_chat_log=1
; --- SAMPLE GROUPS ---
; group=queues:QUEUE/100,QUEUE/101
; group=deptA:SIP/100,SIP/101,SIP/102
; --- END SAMPLE ---
; --- SAMPLE USER LIST ---
; format: user= EXTENSION : SECRET : PERMISSIONS : GROUPS
; You can enumerate several permissions and groups separated by comma
; available permissions: 'all', 'dial', 'hangup', 'meetme', 'pickup',
; 'record', 'spy', 'transfer', 'whisper',
; 'queuemanager', 'queueagent', 'phonebook',
; 'chat', 'preferences', 'hangupself',
; 'recordself', 'voicemailadmin'
;
; user=620:1234:all:queues
; user=621:1234:dial,transfer,pickup:deptA
; user=622:1234:all
; user=623:1234:meetme,pickup
; buttonfile=buttons.cfg
;
END SAMPLE
; This line is NOT commented, it executes
; the autoconfig configuration for FreePBX
#exec autoconfig-users-freepbx.sh
I apologize for not knowing how to post things properly. I am new to posting things on a forum. Any ideas?
Randy Buller
Try starting the service:
You can check if its running or not
If the server is not running you won't be able to connect.
[root@elastixhost ~]# service fop2 status
fop2_server (pid 16851) is running..
The Java Web Console in Chrome gives me this error.
Invalid UTF-8 sequence in header value
ws close event 0
close event 0
on close reseteo a cero
intendo conectar web socket en [url=ws://192.168.1.21.:4445]ws://192.168.1.21.:4445[/url]
[color=#0000FF:308gxl8j]I ran this command that you suggested for another forum member and got the following result.[/color:308gxl8j]
[root@elastixhost ~]# /usr/local/fop2/fop2_server -X 511
** COLLECT INCLUDES fop2.cfg , tipo server
** exec: archivo temporal de server: NEWFOPVJ0tSs
** READ SERVER CONFIG
** READ SERVER CONFIG - archivo fop2.cfg
** READ SERVER CONFIG - archivo NEWFOPVJ0tSs
** READ SERVER calling COLLECT INCLUDES archivo autobuttons.cfg context GENERAL!buttons
** COLLECT INCLUDES autobuttons.cfg , tipo GENERAL!buttons
** exec: archivo temporal de botones: NEWFOP6TRyZy
** READ SERVER remove temp file server /usr/local/fop2/NEWFOPVJ0tSs
** READ SERVER calling collect_includes autobuttons.cfg
** COLLECT INCLUDES autobuttons.cfg , tipo GENERAL!buttons
** autobuttons.cfg already included
** READ SERVER calling collect_includes NEWFOP6TRyZy
** COLLECT INCLUDES NEWFOP6TRyZy , tipo GENERAL!buttons
** NEWFOP6TRyZy already included
** READ BUTTONS CONFIG autobuttons.cfg para contexto GENERAL
** READ BUTTONS CONFIG NEWFOP6TRyZy para contexto GENERAL
Borro boton temporal /usr/local/fop2/NEWFOP6TRyZy
** GENERA CONFIG START
** GENERA CONFIG - GENERAL
** GENERA CONFIG END
Can't listen to port 4445
[color=#0000FF:308gxl8j]If I stop FOP2 and run the command, it streams information.[/color:308gxl8j]
Randy Buller
To start fop2_server in debug mode you first need to stop the daemonized version:
service fop2 stop
/usr/local/fop2/fop2_server -X 511
However, you mention you are using Google Chrome, to make it work with the latest Chrome you must be using FOP 2.23, check that:
/usr/local/fop2/fop2_server -v
Best regards,
I am not quite sure how to upgrade FOP2 and, if I do, will it overwrite my data? I will try and figure out how to do the update.
You don't think that I have a problem with port 4445?
Thank You
Randy Buller
There was *another* upgrade in Chrome tonight or so, and it also changes the websocket handshake so I will have to release a new version soon. Websockets is a fast moving target.
So try with Firefox and not Chrome to test connections. Remember that you must have adobe flash player installed, working and not filtered when using Firefox/Internet Explorer.
Best regards,
There was *another* upgrade in Chrome tonight or so, and it also changes the websocket handshake so I will have to release a new version soon. Websockets is a fast moving target.
So try with Firefox and not Chrome to test connections. Remember that you must have adobe flash player installed, working and not filtered when using Firefox/Internet Explorer.
Best regards,
It does work. I found that it works only if Chrome is not being used for anything. I was told at the install that Chrome is the browser of choice for FOP2 and that is why I am using it. Apparently Chrome updated it self and now FOP2 will no longer work with it. I like your product but it seems that this is a weak point in the design in that browser upgrades that happen continuously will render it inoperable. I don't really care about Chrome one way or another, but the thought arises that the same thing could happen with Firefox and Internet Explorer. This will have to make for unhappy customers.
I have been scouring the forum for answers to my many questions This is a good resource and I have learned much. One of the things was about upgrading to the latest FOP2 in Elastix. I bring this up here because it seems that goes along with making Chrome work. As there is no rpm it appears to be a manual upgrade. I read your instructions. They seem simple enough but you have a warning about breaking some configs. I certainly don't want to mess my installation up as this is a demo that I use to test and demonstrate to potential clients, and I have invested paid support to make sure the install was done correctly.
I tried to download the upgrade file and it wouldn't download. Does the upgrade need to be purchased? Will my current license be applied? Your instructions require me to select the correct distro but the exact file name is not given on the download page. That is why I was trying to do the download to my computer.
I am not trying to give you a hard time because I realize that you are a one or two man operation and that it is hard to keep up with all the changes that are constantly happening with the dependent applications. I am one of the little guys too so I can relate. You are very responsive and I appreciate all your help.
All the best
Randy
Thanks for the feedback. Believe me that I am not happy with Chrome updates either, but I cannot control Chrome releases or changes. You can still use an older chrome build, but not sure if they are available for download or not.
FOP2 is using state of the art technology. That is the price to pay if you use state of the art tech, Anyways, I could add a configuration switch to force the use of adobe flash, perhaps I will add that on the next release. That will permit you to use chrome but not taking advantage of the much faster html5 websockets implementation.
If a browser adds ore removes or changes support for some feature it is not my responsibility. If a user updates a browser, it is not my responsibility, If the browser updates itself, it is still not my responsibility. You have choices, you can still use other browsers.
What I will have to do is to streamline the work with Elastix so I can push new rpms at the same time I release new versions. That involves also a lot of additional work, packaging software is not something easy and it is very time consuming. I will try to do that in the next week, before Elastixworld.
Best regards,