Queues on remote server

fra_romano

I have a two server setup with FreePBX on Fop2 2.31.05 with numbers of all extensions and queues not in overlap.
I have added on fop2.cfg the remote ip manager connection parameters and in buttons_custom.cfg some extensions and queues of the remote server, but only extensions activity is traced, the members or the callers of the remote queue is not seen.
This is my buttons_custom.cfg:
[QUEUE/9300]
type=queue
label=Coda 9300
extension=9300
context=from-internal

[SIP/3919]
type=extension
extension=3919
context=from-internal
label=Intesa
channel=SIP/3919

This is the debug output when extension 3919 enters on queue 9300, in fop2 i can see the extension on call but the queue is empty; the same when i login/logout to the queue:

JOIN channel  SIP/3919-00000063 to queue 9300

It's blessed into class FOP2::Queue

QUEUE: JOIN SIP/3919-00000063 in position 1

--------------------------
pos 1 key SIP/3919-00000063, tiempo 0, clidnum 3919 clidname Intesa
--------------------------


END HANDLING AMI EVENT channel QUEUE/9300^10.8.40.10, command clearentries, data , slot 0

END HANDLING AMI EVENT channel QUEUE/9300^10.8.40.10, command state, data UP, slot 0

END HANDLING AMI EVENT channel QUEUE/9300^10.8.40.10, command queueentry, data 1!SIP/3919-00000063!0!3919!SW50ZXNh, slot 1

END HANDLING AMI EVENT channel QUEUE/9300^10.8.40.10, command waitingcalls, data 1, slot 0

END HANDLING AMI EVENT channel QUEUE/9300^10.8.40.10, command soundjoin, data 0, slot 0

Is this a bug?
Thank you,
Francesco

nicolas

You must add the server header configuration, something like:

[QUEUE/9300]
type=queue
label=Coda 9300
extension=9300
context=from-internal
server=10.8.40.10

Try it that way.

Best regards,

fra_romano

No, it doesn't work.
It's strange because remote extensions or conferences instead works well, with or without the server header.

nicolas

There is no bug, so look closely at your configurations. And be sure you do not have extension 9300 duplicated with some other 'entity'./ You cannot have extension=9300 for a queue and extension=9300 for something else, they must be unique in a give context/tenant.

Best regards,

fra_romano

Hi Nicolas,
i have checked dozens of times... the queues and extensions are unique for each server.
It's possibile for you to connect with a remote assistance program to analize this problem?
Thank you

nicolas

What happens if you define the queue button as

[QUEUE/9300^10.8.40.10]
type=queue
extension=9300
context=from-internal
etc
etc

fra_romano

No...
If i put [QUEUE/9300^10.8.40.10] Fop2 manager says "button updated" but in Fop2 the button disappear!

nicolas

There is nothing for the button not to work, even looking at the brief lots you posted. Try to catch me on the live help on monday and be ready to provide access to your server if you want me to take a brief look. Best regards,

Jordack

Was there any resolution for this? I'm having a similar issue.

GMH

Same problem here. I will gladly work with you to troubleshoot - i have a server we are using for testing with no users on it and can give you access to it and our test fop server if you want to coordinate a time. Actually have a couple of issues I would like to get resolved.

Pero mi español es muy mal.

A quick update, FOP2 appears to be "seeing" the queues, members, and calls just fine. But the display does not reflect any of this?

xx.xx.xx.xx <- Event: QueueParams
xx.xx.xx.xx <- Queue: 1001-queue-36
xx.xx.xx.xx <- Max: 0
xx.xx.xx.xx <- Strategy: ringall
xx.xx.xx.xx <- Calls: 0
xx.xx.xx.xx <- Holdtime: 0
xx.xx.xx.xx <- TalkTime: 0
xx.xx.xx.xx <- Completed: 0
xx.xx.xx.xx <- Abandoned: 0
xx.xx.xx.xx <- ServiceLevel: 0
xx.xx.xx.xx <- ServicelevelPerf: 0.0
xx.xx.xx.xx <- Weight: 0
xx.xx.xx.xx <- ActionID: initial

Not a reference at all

xx.xx.xx.xx <- Event: QueueMember
xx.xx.xx.xx <- Queue: 1001-queue-36
xx.xx.xx.xx <- Name: 1001-GMH2
xx.xx.xx.xx <- Location: SIP/1004-xxx-1001
xx.xx.xx.xx <- StateInterface: SIP/1004-xxx-1001
xx.xx.xx.xx <- Membership: dynamic
xx.xx.xx.xx <- Penalty: 0
xx.xx.xx.xx <- CallsTaken: 0
xx.xx.xx.xx <- LastCall: 0
xx.xx.xx.xx <- IsInCall: 0
xx.xx.xx.xx <- Status: 1
xx.xx.xx.xx <- Paused: 0
xx.xx.xx.xx <- ActionID: initial

It's blessed into class FOP2::Queue

I also tried to set up an [AGENT/xxx] button, but that does not seem to do anything either.

GMH

Another update - after much playing with all the settings, i can now get agents to log in / log out via FOP. When they log in and out from FOP2, they show and work perfectly!!! (Yeah! - I guess the documentation for the "queuechannel=" parameter was a little unclear, the trick was to explicitly use the SIP/peer - leaving that blank did not work though the SIP/Peer was the same as the section name [SIP/peer]).

I had a problem with the "permanent" agents, but realized I had tried creating an "[AGENT/xxx]" button (per another post of yours). Deleted that and restarted FOP2 and now the queues seem to be working fine!

Looking like the only major issue for me now is voicemail - I have a separate post on that.

Jordack

Hey GMH, any way you post some config samples?

All my agents are Static, no matter how i set them up in the buttons_custom file I can not get them to show in the queues.

Thanks

Jordack

Maybe if i post some of my stuff, someone can point me in the right direction.

These are static agents on a remote server. The extension buttons work, just the queues are empty.

[QUEUE/0123]
type=queue
label=Golf Pro Shop
extension=0123
context=from-internal
server=192.168.5.61

[SIP/2804]
type=extension
extension=2804
context=from-internal
label=Test Phone
channel=SIP/2804
queuechannel=Local/2804@from-queue/n
queuecontext=from-queue
server=192.168.5.61

FOP2 Community Forum

Queues on remote server