127.0.0.1 failed to authenticate as 'fop2'
-
Running Freepbx 13 with Asterisk 11.25 on Centos 6.6.
I have been getting this error message for a bit on the Asterisk CLI
NOTICE[5033]: manager.c:2677 authenticate: 127.0.0.1 failed to authenticate as 'fop2'I dont know whether a Freepbx update broke the config setup, or whether I changed something and broke it !
I have tried changing the manager_user and manager_secret back to the FOP settings but that doesnt seem to make a difference.
Can you point me where else I should be looking
Thanks in advance
Here's a snippet from /usr/local/fop2/fop2.cfg
[general]
; AMI definitions
manager_host=localhost
manager_port=5038
;manager_user=fop2
manager_user=admin
manager_secret=myownsecret
;manager_secret=fop222
;event_mask=agent,call,command,system,user,dialplan
/etc/asterisk/manager.conf
;
; AMI - Asterisk Manager interface
;
; FreePBX needs this to be enabled. Note that if you enable it on a different IP, you need
; to assure that this can't be reached from un-authorized hosts with the ACL settings (permit/deny).
; Also, remember to configure non-default port or IP-addresses in amportal.conf.
;
; The AMI connection is used both by the portal and the operator's panel in FreePBX.
;
; FreePBX assumes an AMI connection to localhost:5038 by default.
;
[general]
enabled = yes
port = 5038
bindaddr = 127.0.0.1
displayconnects=no ;only effects 1.6+[admin]
secret = myownsecret
deny = 0.0.0.0/0.0.0.0
permit = 127.0.0.1/255.255.255.0
read = all
write = all
writetimeout = 5000
eventfilter=!Event: RTCP*
eventfilter=!Event: VarSet
eventfilter=!Event: Cdr
eventfilter=!Event: DTMF
eventfilter=!Event: AGIExec
eventfilter=!Event: ExtensionStatus
eventfilter=!Event: ChannelUpdate
eventfilter=!Event: ChallengeSent
eventfilter=!Event: SuccessfulAuth[admin]
secret = myownsecret
deny = 0.0.0.0/0.0.0.0
permit = 127.0.0.1.255.255.255.0
read = all
write = all[admin]
secret = myownsecret
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate,message
write = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate,message
writetimeout = 5000[admin]
secret = myownsecret
deny = 0.0.0.0/0.0.0.0
permit = 127.0.0.1/255.255.255.0
read = all
write = all
writetimeout = 5000
eventfilter=!Event: RTCP*
eventfilter=!Event: VarSet
eventfilter=!Event: Cdr
eventfilter=!Event: ExtensionStatus
eventfilter=!Event: ChannelUpdate#include manager_additional.conf
#include manager_custom.conf[admin]
secret = myownsecret
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
displayconnects = no
read = system,call,log,verbose,command,agent,user,originate
write = system,call,log,verbose,command,agent,user,originate
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login