Transfer Call coming from a Queue

[KeX]

Hi,

I've tried FOP2 today and I like it. Looks very promising!

I've a few phones and queues in my test setup. Here is what I tried:
Queue: Nr. 1111
Phone Answereing Queeu: 1200
Calling Phone: 1204
Free phone: 1120

When 1204 calls 1200, I can answer the call and simply transfer to 1120 via the button.
But if 1204 calls 1111, the queue and the call is distributed to 1200. I can't forward the established call to 1120.

If I start fop_server in attached mode with debuglevel 5 I can see something like this:

127.0.0.1       <- Response: Error
127.0.0.1       <- Message: Channel does not exist: Local/1200@default-11cf
127.0.0.1       <- Server: 0

There are two Problems.

1. The call from the Queue to 1220 was not Local/1200@default-11cf it was Local/1200@default-11cf,2
2. When the call is established, the Calls are internally copied to SIP/1200-xxxx

My queue config looks like this:

[mainq]
strategy=rrmemory
timeout=10
retry=0
reportholdtime = no
joinempty = yes
musiconhold = mainq
autopause = no
eventwhencalled=yes
member => Local/1200@default

I use a local channel and not SIP, cause I need some dialplan magic before calling the phone.

Anyone seen this Problem? Or is there a solution for that?

Chris...

[nicolas]

Have you tried with fop2 beta?

[KeX]

Hi,

No, I haven't. I'm using Debian Lenny(using FOP2 for Debian Etch), but I read, the Beta is for CentOS. And I've problems starting the Beta:

Can't load '/tmp/par-root/cache-6479d09a5b896bf2ff2f1b49c3d966078068c09e/ab48145e.so' for module Filter::Crypto::Decrypt: libcrypto.so.6: Kann die Shared-Object-Datei nicht �ffnen: Datei oder Verzeichnis nicht gefunden at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/DynaLoader.pm line 230.
 at /usr/lib/perl5/site_perl/5.8.8/PAR/Heavy.pm line 109
BEGIN failed--compilation aborted at /tmp/par-root/cache-6479d09a5b896bf2ff2f1b49c3d966078068c09e/inc/lib/Filter/Crypto/Decrypt.pm line 37.
Compilation failed in require at script/fop2_server.pl line 1.
BEGIN failed--compilation aborted at script/fop2_server.pl line 1.

Andy Ideas? Or, do you have a Beta for Debian Lenny 32bit (or Etch)?

Chris...

[nicolas]

Replace the fop2_server with this one:

http://www.fop2.com/downloads/fop2_server_etch32

I am interested to know if it fixes the problem, as I am unable to reproduce it myself.