DAHDI Trunks

[john]

I have just installed FOP2 for evaluation.
I have 2 DAHDI trunks on channels 3 and 4. The trunk list shows the DAHDI but no indication of the channels. Is it possible to see both trunks?

John

[nicolas]

Yes, it should be possible. Are you using auto configuration or writing the config manually? Can you post your trunk button definition here?

[john]

Auto configuration.

If I run ./autoconfig-buttons-freepbx.sh I get :

[DAHDI/3]
type=trunk
label=DAHDI
channel=DAHDI/3
channel=DAHDI/4

which looks like:
http://farm4.static.flickr.com/3558/3695572851_1ca44683ab_o.jpg

John

[nicolas]

Looks fine... I will need to see the manager output when you do some calls out or in your dahdi trunks. You will have to stop fop2 service:

service fop2 stop

And then start it from the command line:

cd /usr/local/fop2
./fop2_server -X 1 

Then make a couple of calls, I am interested in the "Channel" entries in the manager output. If they look like DAHDI/2, then it must work.

--
Nicolás