FOP2 Debian Lenny + GNU C Lib: 2.7
-
We were able to fix the problem. Here is the solution for other Lenny users:
You have to update perl CPAN modules, you do it with these commands:
perl -e shell -MCPANAfter typing that you have to answer serveral prompts if its the first time.. You can just hit ENTER until it ends asking questions... then type:
install Bundle::CPANYou might get some other prompts, it will take a while. After updating you can type "exit" and fop2_server will work and not complain about Compress::Zlib anymore.
-
hello,
the problem is that the debian lenny package for libcompress-raw-zlib-perl has version 2.012 and 2.015 as unstable but there is a problem with 2.020 as descriped here:
TODO:
wait for 2.015-2 to hit testing
.
WARNING:
uploading 2.020 would break libio-compress-zlib-perl, which depends on
libcompress-raw-zlib-perl (>= 2.015), libcompress-raw-zlib-perl (<< 2.016)so the only way is to install it by own, as descriped above or wait for a new package. Maybe it is possible to build the lenny tarball to use version 2.012 instead of 2.020?
best regards
steve
-
Hi Steve, thanks for the report.
I tried to build it with the default installed version but it failed every time. And I wanted to roll it up quickly, so I ended up updating CPAN. Maybe it is possible to build it with the default version, but believe me, I tried several times and every time it failed. I will keep trying but after I finish with other distribution (namely Ubuntu, Suse and Fedora).
Best regards,
--
Nicolás -
./fop2_server --test
./fop2_server: error while loading shared libraries: libperl.so.5.10: cannot open shared object file: No such file or directory
I'm trying to install on Ubuntu 8.04.2 32 Bits
Where I can download the FOP2. Deb?
-
Hi.
I'm also bumping into the error as the other, and I went through updating the Bundle without success. I'm trying to run a trial of this product. Below are the errors I'm getting back.
masterisk:/usr/local/fop2# ./fop2_server --status
Compress::Raw::Zlib object version 2.008 does not match bootstrap parameter 2.020 at /usr/local/lib/perl/5.10.0/Compress/Raw/Zlib.pm line 97.
Compilation failed in require at /usr/local/share/perl/5.10.0/Archive/Zip.pm line 12.
BEGIN failed--compilation aborted at /usr/local/share/perl/5.10.0/Archive/Zip.pm line 12.
Compilation failed in require at -e line 359.Is there a solution for this problem already ?
thanks
Sergio -
-
Hi,
I am running asterisk 1.6 on debian lenny. I was trying to install fop2, also for testing purposes, when I ran into following problem. I have followed the instructions in this topic on updating perl, but apparently to no avail.. Does anybody have any tips on what to try next?# /usr/local/fop2/fop2_server --test is only avaliable with the XS version at /usr/share/perl5/Compress/Zlib.pm line 9 BEGIN failed--compilation aborted at /usr/share/perl5/Compress/Zlib.pm line 9. Compilation failed in require at /usr/share/perl5/Archive/Zip.pm line 24. BEGIN failed--compilation aborted at /usr/share/perl5/Archive/Zip.pm line 24. Compilation failed in require at -e line 383.thanks
Toni -
Hi,
As a follow-up to my former post, this is what I get when I run "/usr/local/fop2/fop2_server --test"
is only avaliable with the XS version at /usr/share/perl5/Compress/Zlib.pm line 9 BEGIN failed--compilation aborted at /usr/share/perl5/Compress/Zlib.pm line 9. Compilation failed in require at /usr/share/perl5/Archive/Zip.pm line 24. BEGIN failed--compilation aborted at /usr/share/perl5/Archive/Zip.pm line 24. Compilation failed in require at -e line 383.whereas, this is the result when I search for Zlib.pm
/usr/lib/perl/5.10.0/Compress/Raw/Zlib.pm /usr/lib/perl/5.10.0/Compress/Zlib.pm /usr/local/lib/perl/5.10.0/Compress/Raw/Zlib.pm /usr/local/lib/perl/5.10.0/Compress/Zlib.pm /usr/local/share/perl/5.10.0/IO/Zlib.pm /usr/share/perl/5.10.0/IO/Zlib.pm /root/.cpan/build/IO-Compress-2.021-jzkkoh/lib/Compress/Zlib.pm /root/.cpan/build/IO-Compress-2.021-jzkkoh/blib/arch/Compress/Zlib.pm /root/.cpan/build/IO-Zlib-1.10-CrNDdY/blib/lib/IO/Zlib.pm /root/.cpan/build/IO-Zlib-1.10-CrNDdY/Zlib.pm /root/.cpan/build/Compress-Raw-Zlib-2.020-qHQPJx/lib/Compress/Raw/Zlib.pm /root/.cpan/build/Compress-Raw-Zlib-2.020-qHQPJx/blib/lib/Compress/Raw/Zlib.pm /root/.cpan/build/Compress-Raw-Zlib-2.021-FLkIBh/lib/Compress/Raw/Zlib.pm /root/.cpan/build/Compress-Raw-Zlib-2.021-FLkIBh/blib/lib/Compress/Raw/Zlib.pmApparently there are some inconsistencies?
I don't know anything about Perl, so what have I been doing wrong?
I installed Lenny (64 bit) from a netinstall-iso and installed the dependencies I needed to run Asterisk. I also ran an update of Perl from CPAN, like advised in this topic. Something is eluding me, hopefully it is something simple?Thanks for your help,
Toni -
Hi Toni,
I do not have an exact answer to give you right now. It would be better if you can catch me on the live help on monday. If you can give me access to your machine I might be able to fix the issue. If susccessfull we can document what we did here.
Best regards,
-
-
-
hi all,
I have the same problem:
asterisk:/etc/asterisk# /usr/local/fop2/fop2_server --test
Compress::Raw::Zlib object version 2.012 does not match bootstrap parameter 2.020 at /usr/local/lib/perl/5.10.0/Compress/Raw/Zlib.pm line 97.
Compilation failed in require at /usr/local/share/perl/5.10.0/Archive/Zip.pm line 12.
BEGIN failed--compilation aborted at /usr/local/share/perl/5.10.0/Archive/Zip.pm line 12.
Compilation failed in require at -e line 359.Does anybody found a solution?
thanks, regards.
-
-
It works great!!
Thanks a lot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login