[SOLVED] Fop2 Don't start

dulloa

Hi! guys I'm trying to find a solution to my problem:

I tried to install and configure Fop2, but I can not start the services:
when I start the service, the script does not give any response..

root@hosting [~]# /usr/local/fop2/fop2_server
root@hosting [~]# /usr/local/fop2/fop2_server -v
root@hosting [~]# /usr/local/fop2/fop2_server -X 15
root@hosting [~]# service fop2 start
Starting Flash Operator Panel 2:                           [FAILED]
root@hosting [~]# /etc/init.d/fop2 start
Starting Flash Operator Panel 2:                           [FAILED]

Info:
CentOS 5 64bits with CPanel
Asterisk 1.6
FreePBX 2.8.1

root@hosting [/usr/local/fop2]# uname -a

root@hosting [/usr/local/fop2]
Linux hosting.xxxxxx.xx 2.6.18-194.32.1.el5 #1 SMP Wed Jan 5 17:52:25 EST 2011 x86_64 x86_64 x86_64 GNU/Linux

root@hosting [/usr/local/fop2]# /lib/libc.so.6

GNU C Library stable release version 2.5, by Roland McGrath et al.
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 4.1.2 20080704 (Red Hat 4.1.2-50).
Compiled on a Linux 2.6.9 system on 2011-04-26.
Available extensions:
        The C stubs add-on version 2.1.2.
        crypt add-on version 2.1 by Michael Glad and others
        GNU Libidn by Simon Josefsson
        GNU libio by Per Bothner
        NIS(YP)/NIS+ NSS modules 0.19 by Thorsten Kukuk
        Native POSIX Threads Library by Ulrich Drepper et al
        BIND-8.2.3-T5B
        RT using linux kernel aio
Thread-local storage support included.
For bug reporting instructions, please see:
<http://www.gnu.org/software/libc/bugs.html>.

root@hosting [/usr/local/fop2]# /lib64/libc.so.6

GNU C Library stable release version 2.5, by Roland McGrath et al.
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 4.1.2 20080704 (Red Hat 4.1.2-50).
Compiled on a Linux 2.6.9 system on 2011-04-26.
Available extensions:
        The C stubs add-on version 2.1.2.
        crypt add-on version 2.1 by Michael Glad and others
        GNU Libidn by Simon Josefsson
        GNU libio by Per Bothner
        NIS(YP)/NIS+ NSS modules 0.19 by Thorsten Kukuk
        Native POSIX Threads Library by Ulrich Drepper et al
        BIND-8.2.3-T5B
        RT using linux kernel aio
Thread-local storage support included.
For bug reporting instructions, please see:
<http://www.gnu.org/software/libc/bugs.html>.

I hope your help, and to purchase a license and even I can not use

Best regards

David Ulloa

[SOLUTION]

this script use a tmp folder with permisions to exec by default /tmp
in my case, I have CPANEL, and by default does not stop running scripts in the / tmp

then...

it is necessary to create a tmp directory..

# mkdir /usr/local/fop2/tmp

and set a new tmp folder

# export PAR_GLOBAL_TMPDIR=/usr/local/fop2/tmp

edit a init script

nano /etc/init.d/fop2

case "$1" in
  start)
        echo -n "Starting Flash Operator Panel 2: "

        # Here set a new tmp folder
        export PAR_GLOBAL_TMPDIR=/usr/local/fop2/tmp

        daemon $DAEMON $OPTIONS
        RETVAL=$?
        echo
        [ $RETVAL -eq 0 ] && touch /var/lock/subsys/fop2_server
        ;;
stop)

and now,

root@hosting [/usr/local/fop2]# ./fop2_server -X 3

** MANAGER CONNECTION Connecting to localhost:5038 (Server 0)
** MANAGER CONNECTION Connected to localhost:5038 (Server 0)
....

its working

Regards!

nicolas

Are you running selinux? If so, disable it or look at its log to enable fop2_server run. You can try by typing in the command line:

setenforce 0

After that, try to start the server in debug mode:

/usr/local/fop2/fop2_server -X 3

After a few seconds, you should start seeing quite a lot of lines of output.. If you do not see anything, you might want to stop it with ctrl-C, then removing the /tmp/par-root directory and try again.

Once you see some output, the service should start normally.

Best regards,

dulloa

root@hosting [~]# setenforce 0

setenforce: SELinux is disabled

start and .... shows nothing

root@hosting [~]# /usr/local/fop2/fop2_server -X 3
root@hosting [~]#

dulloa

root@hosting [/usr/local/fop2]# setenforce 0

setenforce: SELinux is disabled

and try again:

root@hosting [/tmp]# ls |grep root
hsperfdata_root/
par-root/
pdk-root/
root@hosting [/tmp]# rm -rf hsperfdata_root/ par-root/ pdk-root/
root@hosting [/tmp]# /usr/local/fop2/fop2_server -X 3
root@hosting [/tmp]# 
root@hosting [/tmp]# ls |grep root
par-root/
root@hosting [/tmp]# ls par-root/cache-7e11dcc5170cf8f736ef8efe689ab86e/
./  ../  fop2_server*  libperl.so*
root@hosting [/tmp]#

nicolas

What happens when you run fop2_server -X 3 ? Do you stop it with ctrl-c ? Did you download the correct version for your distro? Are you running selinux ?

dulloa

1.- when i run: ./fop2_server -X 3 dont show nothing (dont start)
2.- SELinux is disabled
3.- i have FOP for: Centos 5 - 64bits
4.- sorry for my english

nicolas

But when you run fop2_server it returns to the command prompt ? or it takes the terminal? How long did you wait if it is taking the terminal? A few seconds, A couple of minutes? Did you hit ctrl-c to stop it at any time? Did you download fop2 for centos5 64 bits?

dulloa

I recorded this video to show what happens [url:pkq7jnu7]http://www.vimeo.com/23538908[/url:pkq7jnu7]

best regards

nicolas

Are you mounting /tmp with noexec ? Try to catch me on the live help, I am online now.

dulloa

What time I can find you online?

dulloa

/etc/fstab

LABEL=/                 /                       ext3    defaults,usrquota        1 1
LABEL=/tmp              /tmp                    ext3    defaults        1 2
LABEL=/home             /home                   ext3    defaults,usrquota        1 2
LABEL=/backup           /backup                 ext3    defaults        1 2
LABEL=/var              /var                    ext3    defaults,usrquota        1 2
LABEL=/usr              /usr                    ext3    defaults,usrquota        1 2
LABEL=/boot             /boot                   ext3    defaults        1 2
tmpfs                   /dev/shm                tmpfs   defaults        0 0
devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
sysfs                   /sys                    sysfs   defaults        0 0
proc                    /proc                   proc    defaults        0 0
LABEL=SWAP-sda6         swap                    swap    pri=0,defaults        0 0
/tmp             /var/tmp                    ext3    defaults,usrquota,bind,noauto        0 0

nicolas

I am not sure the options for the /tmp directory, please follow the directions from the FAQ number 14.

And try to catch me on the live help if you can provide access to your server.

dulloa

solved! read the first post

FOP2 Community Forum

[SOLVED] Fop2 Don't start

nano /etc/init.d/fop2