Call Pickup

gregc

While a phone/extension is ringing, I press that button and then press Call Pickup. My phone rings and when I answer it just hangs up. Am I doing it wrong?

nicolas

You are not doing it wrong. But callpickup behaviour has changed and now is REALLY picky about extension contexts. That is why I changed the internals and I am now forcing a global var PICKUPMARK before performing the actual pickup, and it will work fine pretty much always.

If you use centos 5 32 bits and want to test drive the "pre release" version, download this two files:

http://www.fop2.com/downloads/fop2_server
http://www.fop2.com/downloads/fop2.js

Replace the ones you have with these two. Flush your browser cache. Restart fop2 and try again.

Those files are not going to be there forever.. I will remove them as soon as the next version is released, that will be pretty soon.

Best regards,

gregc

That works the way I would expect it to now. Thank you!

newnet82

Hi,

I'm using a CentOS release 5.3 (32 bits version) and I have the same problem.
So, I download the 2 files. but the fop2_server is for x86-64 and not x86_32.

Can you help me ?

nicolas

Hi,

Download the complete tarball from http://www.fop2.com/downloads/fop2.tgz , that one is for centos 5 , 32 bits for sure.

Best regards,

newnet82

Fine. It is running

I find a problem I think. When I do a restart, or a start, or a stop it says : Can't listen to port 4445.
So I kill the process and do a "restart". Now, it never achieves the restart.

I suppose it is an error of manipulation. Isn't it ?

BR

nicolas

Hi,

What are you restarting and how? Maybe you have fop1 still running and listening on port 4445? Best regards,

newnet82

With the fop2.tgz found on http://www.fop2.com/downloads.

In /var/www/html/panel/op_server.cfg I have

listen_port=4446

When I do a netstat -an | grep 444 I only see :

tcp 0 0 0.0.0.0:4445 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:4446 0.0.0.0:* LISTEN

So fop1 is really listening on the port 4446 and fop2 on the port 4445.

I only do a /usr/local/fop2/fop2_server restart after modification of the file buttons.cfg.
My fop2.cfg is :

[general]
; AMI definitions
manager_host=localhost
manager_port=5038
manager_user=fop2
manager_secret=fop2
;event_mask=call,agent

; Daemon definitios
;listen_port      = 4445
;restrict_host    = www.asternic.org
;web_dir          = /var/www/html/operator/fop2

; Global Config
language           = en
poll_interval      = 86400
poll_voicemail     = 1
monitor_ipaddress  = 0

; Force blind transfer on asterisk 1.6
blind_transfer     = 1

; Master Password that overrides any individual one
master_key = 5678

; --- SAMPLE USER LIST ---
user=701:1234:all
user=704:1234:all
;user=620:1234:all
;user=621:1234:all
;user=622:1234:all
;user=623:1234:meetme
buttonfile=buttons.cfg
; ------ END SAMPLE ------

; This line is NOT commented, it executes 
; the autoconfig configuration for FreePBX
;#exec autoconfig-users-freepbx.sh

I just try the command fop2_server restart on a new installation and it's the same.
So, when I need to restart fop2 I do

ps ax | grep fop2
kill fop2_pid
fop2_server --start &

My installations are registered.

Strange ...
BR

nicolas

Hello,

The start,stop,restart options are for the init script that should be installed in /etc/rc.d/init.d or /etc/init.d depending on your linux distribution. The init script does what you did to fop2_server directly in a graceful manner..

/etc/rc.d/init.d/fop2 [start|stop|restart|reload]

Best regards,

newnet82

OK.
I understand ...

Thx

FOP2 Community Forum

Call Pickup