FOP Window

[lmarco]

Hi at all,

it's my first install, I think good integration and work.

Anyone have the problem with queue display and configuration?
Even if I've configured a queue through freepbx I can't see any queue status on fop2

I used Elastix 1.6 with freepbx 2.4
I'm interested with IM license anyone have tried this module?

Regards
Marco

[nicolas]

Hi Marco,

The free version shows up to 15 buttons, if you have several extensions, you will not have room for queues or trunks. If using FOP 2.21 you can install fop2admin 1.2.6 and disable buttons on the fop2 buttons freepbx config page, that way you can disable some extensions to "make room" for the queues.

[lmarco]

Hi,
ok with fop2admin 1.2.6 I've enabled only 4 extensions, with 3 queue and 1 conference room configured in freepbx no entry was displayed in "fop2 buttons" so that in fop2 web page there are no queue section

Also with ring group, I've 3 ring group configured but no ring group was displayed on fop2 web page but only 4 extensions

Regards
Marco

[lmarco]

Hi,

I've installed fop2admin module for freepbx, than enabled only 4 extensions.
In freepbx I've setup 3 queues, 3 ring group, and 1 conference room but in fop2 web pages only 4 extesions are displayed and 1 section ringroup...empty

In fact on freepbx ===> fop2admin ===> "fop2 buttons" queues, for example, has no entry even if I've configured 3 queues...

What I wrong??

Regards
Marco

[nicolas]

The problem is that you are using FreePBX 2.4. Upgrade to 2.7 (even 2.5 might do) and you will be fine.