Re-Activate License adn Mgr. Auth

[iinteractive]

Fairly new to all this and just finished my first installation. Everything worked fine, switched from test environment to live, couldn't login to fop2. Looked like all I need to do was re-activate the license. Did that, see screeny below...
http://www.iinteractivesolutions.com/wp-content/uploads/fop2.png

So, now no Manager Authentication? Here are my fop2.cfg and amportal.conf settings (if more of these files are needed please lemme know)

[admin]
secret = ########
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate
write = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate

and this for fop2.cfg

[general]
; AMI definitions
manager_host=localhost
manager_port=5038
manager_user=admin
manager_secret=########
;event_mask=agent,call,command,system,user,dialplan

I hate to be such a noob at this and I sincerely appreciate any help I can get. Also, thanks for the tip on changing out the fop v. fop2 link! I'll be using that as soon as I can get fop2 login credentials rocking.

Have a great day!
M.

[nicolas]

Hi,

In some broken distros localhost is not mapped to 127.0.0.1, try changing the manager_host to the ip and try again.

And be sure the password is correct, check that you do not have white space at the beginning or end of the password itself.