Trixbox no go Won't connect to FOP
-
Well for the time being I have used different context for different user. In a system of 100's of extentions it's a lot of work.
Your new FOP2 is an excenlent product don't get me wrong I am not complaining, and that is why I am putting a lot of time into it.If you need any help with a web interface skin or anything at all, I will be happy to help.
www.voipmaroc.com, www.salesrep.com is some of our sites.Is there any way to group extension in the gui without putting them in a queue ??
Thanks
-
RPM for perl on the second server won't instal I am getting the following
[root@voip2 src]# rpm -ivh perl-5.8.5-36.3.i386.rpm
Preparing... ########################################### [100%]
file /usr/share/man/man1/xsubpp.1.gz from install of perl-5.8.5-36.3 conflicts with file from package perl-5.8.5-49.el4
[root@voip2 src]#so I take it its already installed ??? I am not really good a linux.
FYI this is the verion on the server[root@voip2 src]# perl -MLWP -le "print(LWP->VERSION)"
5.79 -
-
RPM for perl on the second server won't instal I am getting the following
[root@voip2 src]# rpm -ivh perl-5.8.5-36.3.i386.rpm
Preparing... ########################################### [100%]
package perl-5.8.5-49.el4 (which is newer than perl-5.8.5-36.3) is already installed
file /usr/bin/a2p from install of perl-5.8.5-36.3 conflicts with file from package perl-5.8.5-49.el4....[snip]...
so I take it its already installed ??? I am not really good a linux.Seems like you have a newer perl than the RPM I made. FOP2 will only run with a non debugging perl and Centos4 provides a debugging perl. You will have to recompile perl OR You can also try to force install the rpm, making actually a downgrade (just add --force to the rpm command). But that might break something else on your perl install as you have a newer version (I do not think it will break anything, but I am not responsible if it does.. anyways you can always update perl again...)
Best regards,
-
I did do the perl rpm with the --force command which worked and I was able to install fop2 but after I log in it just sits there saying connecting to server, attempt number : 1 then I get could not connect to server.
I checked the firewall logs and do not see any errors yes I am stuck here I rebooted the server several times and I have done this setup like I did my primary servers which is working perfectely.
Thank for the continued help.
-
-
-
-
Can you telnet to port 4445 from your browser machine to the fop2 server machine? Are you running FOP1 in that server too? If you are also running FOP1, change its listening port and restart FOP1. Be sure that FOP2 is configured to port 4445, be sure that port 4445 is not blocked by iptables or firewalls in the middle, the telnet test should give you a hint.
Another potential issue is if you use foreign characters in the button labels and the button file is not saved as utf8.
Best regards,
-
-
I think we covered every possible cause in this super long thread. I asume you have the latest flash player installed right? You might want to try with different browsers/platforms. Sometimes the flash player is broken on one browser and working in another.
I am also sure that it would take me much less time to fix the issue myself by logging into your machine than the time it takes to write all of these posts! Try to catch me via the live help tomorrow... if you can give me ssh access to the machine I will be able to at least test the install and probably make it work in a few minutes.
Best regards,
-
I think we covered every possible cause in this super long thread. I asume you have the latest flash player installed right? You might want to try with different browsers/platforms. Sometimes the flash player is broken on one browser and working in another.
I am also sure that it would take me much less time to fix the issue myself by logging into your machine than the time it takes to write all of these posts! Try to catch me via the live help tomorrow... if you can give me ssh access to the machine I will be able to at least test the install and probably make it work in a few minutes.
Best regards,
I am using trhe same browser I am using to connect to the working trixbox server. I willbe happy to give you access.
I would need you IP via pm or email and I will send you the password
-
Just for other users to benefit. In this particular case, FOP1 was still running and listenting on port 4445. If you cannot connect you have to verify:
-
That FOP1 is not running or listening to some other port besides 4445
-
That FOP2 is started and running
You can verify the ports opened with "netstat -nta"
Starting fop2 as a service will say OK, but if it cannot bind to port 4445 because is in use by some other program it will silently fail. You can verify that by runing fop2 from the command line:
cd /usr/local/fop2 ./fop2_server -X 15-
if you use https you might have issues with fop2 client connections. Try to use http
-
Last but not least, if you use manual configurations and use non ascii characters in button labels, you MUST save the config files as UTF8.
And I forgot! You have to login with an extension and voicemail password if you use freepbx automatic config. You can check what users are available by running autoconfig-users-freepbx.sh by hand and reading the output.
Regards,
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login