DAHDI channels won't show

[shap2001]

Hi,
I'm using fop2 with elastix 2.3.0.8[/color:3pi26f16], Everything work's fine for me but DAHDI channels,
I have Sangoma A102 card (2*E1) and my trunks configured by "Zap Trunk (DAHDI compatibility mode)[/color:3pi26f16]"
now i have 2 Zap Trunks named: ZAP/g2[/color:3pi26f16] & ZAP/g12[/color:3pi26f16] with different numbers. fop2 shows me just two buttons with these names and nothing more! I can't see & monitor channels. Please help

FOP2 ver: 2.26
Asterisk ver: 1.8.20.0
Dahdi ver: 2.6.1
Wanpipe ver: 3.5.28

ps: weird thing i noticed: in result of asterisk -rx "core show channels"[/color:3pi26f16] command i have: DAHDI/i2/XXXXXXXXX[/color:3pi26f16] & DAHDI/i1/XXXXXXXXXX[/color:3pi26f16]

[nicolas]

You must go to Fop2 Buttons in fop2admin, scroll to your trunk buttons and add the channel ranges on the proper fields, like

1-1

and

2-2

Best regards,

[shap2001]

Dear Nicolas,
Thanks for your advice but no change on my issue after doing all you mentioned.
[url=http://postimage.org/image/wocnotewb/:1abexqc3]*http://s9.postimage.org/wocnotewb/fop2.jpg*[/url:1abexqc3]
[url=http://postimage.org/image/4v0q5kw21/:1abexqc3]*http://s12.postimage.org/4v0q5kw21/fop_admin.jpg*[/url:1abexqc3]
ps: added channel ranges not saved after submit in freepbx fop_admin

[nicolas]

If the ranges where not saved is probably because you have lots of buttons and php has the max_input_vars limit. you will have to increase that value in php.ini

max_input_vars=10000

Then restart the web server. If the ranges are not saved, you won't see activity on the dahdi trunks. Remember that fop2 matches channels by name, and DAHDI/gx is not a name as g is a modified, adding ranges will add lines line

channel=DAHDI/1
channel=DAHDI/2
...

Best regards,

[shap2001]

WoW! Thanks in advanced! Everything is fine now, just a little question;
I really don't need to monitor all calls with DAHDI/i1/xxxxxxxxxxxxxx-xxxx details, there are more than 240 channels monitoring! I need just number of lines in use to be shows as already showing on top, Please help me on this too
again thanks alot

[nicolas]

trunk buttons do not have a summary mode as queue buttons, so you will see details for every on of them.

Best regards,