dahdi trunks (POTS) BLF
-
I have fop2 working. I have created 4 FXO trunks and fop2 buttons show these. However when the lines are used ( regardless of fxo ) al trunks show in one button only.
autoconfig-buttons-freepbx.sh
shows all trunks under all keys. how can i configure for each button to show one trunk FXO only. -
Depends on your channel names, each button must have a name that matches in channel distinctively as reported by asterisk. First run autoconfig-buttons-freepbx.sh to see how are your trunk buttons defined, look at the main channel name (in square brackets, and any other channel directives it might have). Then make a call from asterisk and check the channel names in the cli:
asterisk -rx "core show channels concise"
How are the channels named? If the names are all similar, like DAHDI/1-1234, DAHDI/1-2345, then all those calls will be shown on button with channel name DAHDI/1.
Best regards,
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login