Problem to install FOP2 on Elastix

[M.Yazdian]

Hi guys,
I think every think is ok, so I don't know who to login to the FOP2 extension and password...!!!???
Elastix firewall disabled and I Accept pot 4445 in UDP/TCP in iptables
My server configuration is:

asterisk manager.conf

[general]
enabled = yes
port = 5038
bindaddr = 0.0.0.0
displayconnects=no ;only effects 1.6+

[admin]
secret = 123456
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate
write = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate

asterisk/fop2/fop2.cfg

[general]
; AMI definitions
manager_host=localhost
manager_port=5038
manager_user=admin
manager_secret=123456
listen_port      = 4445
;restrict_host    = www.asternic.org
;web_dir          = /var/www/html/operator/fop2

; Global Config
poll_interval      = 86400
poll_voicemail     = 1
monitor_ipaddress  = 0

root@pbx:~ $ /usr/local/fop2/fop2_server -test
Flash Operator Panel 2 - No valid license found. Demo Mode

netstat -lnp |grep 4445
tcp        0      0 0.0.0.0:4445                0.0.0.0:*                   LISTEN      5722/fop2_server

Now in all configuration on my server Ican't login to the FOP2 width
extention = admin
passowrd = 123456

extention = 5001 //Extention ID
passowrd = 5001 //Extention passowrd

extention = 5001 //Extention ID
passowrd = abcd1234 //Extention Voice mail passowrd

Please advise me to solve this problem
any help is appreciated

[nicolas]

FOP2 has its own set of extensions/passwords to log (besides all of your servers credentials you posted). If you installed from Elastix marketplace, go to "fop2 users" menu and be sure to add an extension/password, or modify the password for any given extension if already created (by default the voicemail pin is used).

If you did not install via market, you can install the fop2 manager (available from www.fop2.com/download.php) and you will be able to configure users there.

Both options asume you did not modify fop2.cfg #exec line at the end to have automatic configuration.

Best regards,