Custom Parking lot not showing up
-
FOP2 will show whatever it has configured. If you use FreePBX autoconfiguration, then it will show what FreePBX has to offer (and that excludes any custom button you might have).
You can export the automatic button configuration that the autoconfig-buttons-freepbx.sh script outputs to a file and use that instead of automatic configuration. And then append/add your custom park button to the button configuration file.
If you do not care about filtering groups, you can also add your custom park button in buttons_custom.cfg, but be sure your fop2 users does not have any groups assigned (in the fop2 users admin page).
A park button config should look similar to this in fop2:
[PARK/default]
type=park
extension=700
label=Parking
context=parkedcallsBest regards,
-
I will look at it this evening and report back. thank you.
-
no luck yet. The built in old FOP shows the call in the parking slot, but FOP2 does not.
http://i.imgur.com/sSrhnzg.jpghttp://i.imgur.com/WGgXkpt.jpg
Parking is not checked in the FreePBX interface.
http://i.imgur.com/bg2S0kf.jpgextensions_custom.conf
[park-hints2] include => park-hints-custom ; THIS IS COMMENTED OUT ; This is how you would still use the automated parking if you choose ; Since we manually park, I have it disabled. exten => 700,1,Set(CHANNEL(parkinglot)=parkinglot_lot2) exten => 700,n,Set(_PARKINGLOT=parkinglot_lot2) exten => 700,n,Park() exten => 700,n,Hangup() exten => 701,hint,park:701@parkinglot_lot2 exten => 702,hint,park:702@parkinglot_lot2 exten => 703,hint,park:703@parkinglot_lot2 exten => 704,hint,park:704@parkinglot_lot2 exten => 705,hint,park:705@parkinglot_lot2 exten => 706,hint,park:706@parkinglot_lot2 exten => 707,hint,park:707@parkinglot_lot2 exten => 708,hint,park:708@parkinglot_lot2 exten => _70[12345678],1,Set(PARKINGEXTEN=${EXTEN}) ;start state debugging info exten => _70[12345678],n,NoOP(Park in parkinglot: ${PARKINGEXTEN}) exten => _70[12345678],n,NoOP(Checking for parking lot: park:${EXTEN}@parkinglot_lot2) exten => _70[12345678],n,NoOP(Parking Lot State: ${DEVICE_STATE(park:${EXTEN}@parkinglot_lot2)}) ;end state debugging info ;IF YOU HAVE TWO DIGIT USER EXTENSIONS, THIS WILL NOT WORK FOR YOU! ;IF YOU USE 4 DIGIT EXTENSIONS, SET extLeng=4 !!!!!!!!! exten => _70[12345678],n,set(extLeng=3) ;If the line is not in use, we park it. Otherwise, we return the call to whomever transferred it exten => _70[12345678],n,GotoIf($[ ${DEVICE_STATE(park:${EXTEN}@parkinglot_lot2)} =NOT_INUSE ] ?PARK) ;Start Busy/non-park debugging for non park scenario exten => _70[12345678],n,NoOP(Park is INUSE: ${EXTEN}) exten => _70[12345678],n,NoOP(Failed park: ${EXTEN}@parkinglot_lot2) exten => _70[12345678],n,NoOP(Transferer of Park: ${BLINDTRANSFER}) ;Stop Busy/non-park debugging for non park scenario exten => _70[12345678],n,GotoIf($[ "${BLINDTRANSFER:4:${extLeng}}" = "" ] ?PICKUPPARK) exten => _70[12345678],n,NoOP(Transferred call, sending back to: ${BLINDTRANSFER:4:${extLeng}} ) exten => _70[12345678],n,dial(local/${BLINDTRANSFER:4:${extLeng}}@from-internal,,tr) exten => _70[12345678],n,Hangup() exten => _70[12345678],n(PICKUPPARK),NoOP(This is an inside call, Pick up Park Extension: ${EXTEN}) exten => _70[12345678],n(PICKUPPARK),ParkedCall(${EXTEN},parkinglot_lot2) exten => _70[12345678],n(PICKUPPARK),Hangup() ;Park The call exten => _70[12345678],n(PARK),Set(CHANNEL(parkinglot)=parkinglot_lot2) exten => _70[12345678],n(PARK),Set(_PARKINGLOT=parkinglot_lot2) exten => _70[12345678],n(PARK),Park(,,,,s) exten => _70[12345678],n(PARK),Hangup() ;This is for park retrieval exten => _**70[12345678],1,NoOP(PICK UP PARKED CALL!!!!!!!!!: ${EXTEN}) exten => _**70[12345678],n,ParkedCall(${EXTEN:2},parkinglot_lot2)feature_general_customer.conf
[parkinglot_lot2] parkedcalltransfers = caller parkedcallreparking = caller parkext=700 parkpos=701-708 context=parkinglot_lot2 parkingtime=120 pickupexten=*8 courtesytone=beep parkext_exclusive=noI created buttons_custom.cfg as I am not using groups. This is only being used by the operator and her backup at the moment. Do I need to include it in the fop2.cfg someplace?
http://i.imgur.com/v6XHG0E.jpg[PARK/default] type=park extension=700 label=STL_Parking context=parkinglot_lot2 -
Hi,
The first screenshot you show is not from FOP but the Elastix Panel or something like that.
Regarding your parking lot, your context uses the "parkinglot_lot2" context, as such, the button definition in fop2 should reflect that:
[PARK/parkinglot_lot2] type=park context= (not sure here! if parkedcalls or parkinglot_lot2)Try it that way and see if you see parked calls.
-
Hi,
The first screenshot you show is not from FOP but the Elastix Panel or something like that.
Regarding your parking lot, your context uses the "parkinglot_lot2" context, as such, the button definition in fop2 should reflect that:
[PARK/parkinglot_lot2] type=park context= (not sure here! if parkedcalls or parkinglot_lot2)Try it that way and see if you see parked calls.
That first shot is the default FreePBX FOP that no one uses. Just showed that so you could see that the call WAS there.
I created the buttons_custom.cfg you mentioned as noted in the end of my post using the correct context (it is parkinglot_lot2).
That was the only thing in buttons_custom.cfg. If I need to do it some other way, let me know. -
-
Nothing in it except this. The files are in /etc/asterisk/fop2. This was a default install from the Elasitx 2.4 add on screen.
-
Move buttons_custom.cfg to /usr/local/fop2 , or modify autoconfig-buttons-freepbx.sh (torwards the end of the file), and modify the path to /etc/asterisk/fop2 .
-
Nailed it! I had to hide the defualt one because it showed me 2 buttons, but that was simple enough.
-
This is working great for my on site PBX.
For my hosted PBX, i have 3 branch office reporting to it and 3 separate parking lots set up.
The buttons work great, but as expected based on a previous comment you made, if I create a user with any group restrictions they will not see the custom button.
Is there a way we can add this custom button to something so it will show up when groups are used?
I don't care if all 3 parking lots are visible to all users, but I want to narrow down the extensions so the people in city a are not seeing the people in city b
-
Groups are defined in autoconfig-users.sh script, the output from that script is used as valid fop2 configuration. For showing the groups it will query mysql for the table data. You can modify that script to modify its output in several different ways (you can create a new mysql table and join it together on the mysql query for groups, you can just ditch the mysql query and just echo hardcoded lines to stdout, etc). It is a simple shell script, you can do whatever you want with it as long as it outpus valid fop2 configuration lines.
-
Have not had time to work on this yet, but I intend to. thank you for the response.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login