FOP2 dahdi trunk activity

[lbazan]

Hi

When you enter in the FOP2 the DAHDI Trunks section no have activity.

I have 1 license and the test pass OK

/usr/local/fop2/fop2_server --test

Flash Operator Panel 2 - Valid License (1)
Connection to manager OK!

Best regards

[nicolas]

You must define your DAHDI ranges in the "Fop2 buttons" page in the Fop2 manager.

Best regards,

[lbazan]

thanks for your response,

http://pbrd.co/1lqtXBB
http://pbrd.co/1lquTpE
http://pbrd.co/1lquWBM

WCT13x/0 "Wildcard TE131/TE133

I not see activity in trunk dahdi area in:
FOP(1)
Operator panel(elastix)
and payd the FOP2 (same not see activity dahdi trunk in fop2)

I create buttons.cfg and define:
(honestly do not know if this is good for so many tests I've done.)
[DAHDI/1]
type=trunk
label=DAHDI
channel=DAHDI/1-1
channel=DAHDI/1-2
channel=DAHDI/1-3
channel=DAHDI/1-4
channel=DAHDI/1-5
channel=DAHDI/1-6
channel=DAHDI/1-7
channel=DAHDI/1-8
channel=DAHDI/1-9
channel=DAHDI/1-10
channel=DAHDI/1-11
channel=DAHDI/1-12
channel=DAHDI/1-13
channel=DAHDI/1-14
channel=DAHDI/1-15

Best Regards!

[nicolas]

Upgrade to FOP 2.26 or higher, or read this post on how to modify the configuration script to support DAHDI interfaces instead of channels:

View Post 3489

Best regards,