DTMF NOT DETECTED
-
Hi Fop2 Team,
If our agent call to PSTN they should input PIN CODE
Agent ----> Enter Phone Number ---> Dialing ---> Enter PIN ---> Customer
I dial phone number from FOP2 but after i press PIN not detected by asterisk, so i shout press PIN from xlite.
Why?
I put pic on attactment.
Thanks
-
It is not something we can fix from FOP2... as FOP2 controls the PBX and not the phone. There is an AMI command sendDTMF that we use.. now, if the dtmf is really being sent or not, or recognized, is something beyond FOP2. As the sendDTMF is an 'external' command, it might fail, as it is not directly in the media/flow between the two endpoints. Not sure in your diagram if the call is actually bridged with "something" when you enter the pin code, the sendDTMF requires the call to be bridged so it knows the destination channel to send the dtmf to... if there is no destination/bridged channel, then it will do nothing.
You can start FOP2 in debug mode and look for the DTMF commands being sent, if they have a proper destination channel, etc..
http://support.asternic.biz/?/selfhelp/view-article/how-to-debug-fop2/10
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login