fop2 not showing dahdi trunks
-
After installing fopadmin i do not see the DAHDI trunks for incoming calls in the TRUNKS box. Has been replaced with ZAP/g0
How can I get it so I can See DAHDI in the Trunks Box in FOP2. Everything else (Except Spy and whisper) works Great
Thanks in advance
Brendon -
You must supply the trunk channel range by going into fop2admin fop2 buttons page, like 1-24, etc. Also, if you have a recent install where channels are named DAHDI/iX instead of DAHDI/x, then you will have to add a line to autoconfig-buttons-freepbx.sh
Best regards,
-
What about for us on regular asterisk? I have the same issue with the trunks not showing. I have a recent install that uses DAHDI/iX rather than DAHDI/X
-
Nevermind found out you need to make list like this
[DAHDI/1]
type=trunk
label=Span1
channel=DAHDI/i1
channel=DAHDI/i2
channel=DAHDI/i3
channel=DAHDI/i4
etcinstead of
channel=DAHDI/1
channel=DAHDI/2
channel=DAHDI/3
etclike I had before
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login