Names not updating
-
As I said, buttons do not refuse to show or not show a label. I repeat, if you have a button with an extension and context that matches a local queue member, then the button will be renamed to the one of the queue member. I do not know if that is your case, but could be, try this command:
asterisk -rx "queue show"
See if you have members of type Local, something like: Local/1234@from-internal/n
If you do have them, then check a button with extension=1234 and context=from-internal , if you find a match, then that button will be renamed with the queue member name if any. IF the queue member name is empty, then it will show an empty label.
-
Hi there.
Please advise if the below is correct ?
(13:27:59)(Asterisk Unit 2) ast-U2 asterisk # asterisk -rx "queue show any-res-general-queue"
any-res-general-queue has 0 calls (max unlimited) in 'rrmemory' strategy (0s holdtime, 0s talktime), W:0, C:0, A:0, SL:0.0% within 30sMembers:
SIP/5608 with penalty 2 (Unavailable) has taken no calls yet
SIP/5334 with penalty 1 (Unavailable) has taken no calls yetNo Callers
My button below:
[SIP/5334]
type=extension
extension=5334 ?
group=Reservations
context=local-sip ?
label=Natasha
mailbox=5334@post-office
extenvoicemail=8500@defaultThe other buttons has the same entries as above button and they work !!
-
-
Still no reply please help i need it decpretaly
Not sure what you want me to say. It could be correct, or not.
- you are showing just one queue, but other queue members might change/rename the button.
- you are displaying one button snippet, but there is no way for me to say if what you see comes from that button or different one.
If you want to test, try removing elements or start from zero and adding elements one by one, and see how it works, for example, create a config with just those two buttons (queue and extension), and nothing more. Start fop2 and look at the button label, suppose you do not see the label, then change that button to the other one in the same queue, do you see the label? Go up with this until you find what change is making the button label to show/not show.
Best regards,
-
I know this thread is very old, but I was having an issue where the button name would not update to the new label even though it was correct in the database and in the admin interface. Turned out the extension was a member of a queue somewhere that was preventing the name from updating. When I removed the extension from all queues, it updated and then I could re-add the extension to the queues and it would display correctly. Hope this helps someone.
-
Hi Jonathan,
Thanks for your post. What you saw is due to a bug (or oversight) in FreePBX, where a queue member name is not changed when the extension name does.
FOP2 will rename buttons to the queue member name (to accommodate to some callcenter and hotdesk scenarios, where you might have a different agent sitting on the same box at different times). Also to make the queue filter work. So, if you have an extension with name "John", but that extension as queue member is named "Mary", in FOP2 you will see it as "Mary".
When you modified the queue in FreePBX, the queue member name got synced inside FreePBX, and so you see it reflected in FOP2 afterwards.
Best regards,
-
I realize this is an old thread but I am having the strangest issue. I have a button in the FOP that will not change its name. The name is correct on the extension itself and in the FOP Manager but it keeps showing the old name in the FOP when you log in. I have removed it from every queue it was part of and I have completely removed the extension all together and rebuilt it and it still shows the old name in the FOP. Any ideas?
FOP2 - Version 2.31.00
FOP2 Manager version 1.1.3
FreePBX 2.11.0.23 -
if the output from /usr/local/fop2/autoconfig-buttons.sh shows the correct name, then the only way a button could be renamed is because of a queue member matching the device lor local/extension@context.
Run this
asterisk -rx "queue show"
Inspect it carefully, do you see that "old" name somewhere?
-
Hi,
I have FOP2 Version 2.31.19 running on Issabel 4.0. I chaged agents names on a queue, but the names on the queues group remain the same. I've tried all the instructions I found on the forum but the queue reload all command. I was afraid to loose the statistics. How can I make the names of the agents on the queue group syncronize with the current names on the actual asterisk extensions ?
When I run asterisk -rx "queue show" I still see the old names. But is there a way to update the names without loosing the statistics ?
-
HI,
Not sure what statistics are you afraid to loose... the app_queue statistic for the agent will probably get lost, as there is no such feature as "rename" a queue member, but you need to remove and readd it, most probably losing app_queue internal answered calls by that agent. Now, if you use something like Asternic Call Center Stats PRO ( http://www.asternic.net ), then you won't lose them as the software will track and keep stats in its own database. In this case, you will still see data for the agent with the old name, and then new data with the new agent name (But not merged, as they are different agents!), you can do a manual sql edit to merge two agents if needed.
Best regards,
-
-
Hi Guys,
How i solved the issue on Freepbx.
I had users, who are dynamic queue agents. They would have to log into the queue to receive calls.
If you run "asterisk -rx 'queue show' "
You will still see the old username, even though you renamed the extension on FreePBX and fop2 admin has the new username.
Log the agent out of the queue and then recreate the user in fop2 admin. Then will the change take effect.
The issue here was the queue for me.
I have not had an issue as yet with static queue agents, but I will update on a fix if I come across the issue.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login