No eth0, only eth1.

[ghenry]

Hi,

Trying to register here but getting the following as there is no eth0, only eth1:

[root@localhost fop2]# ./fop2_server --register
eth0: error fetching interface information: Device not found
Can't get info from ifconfig:  at script/fop2_server.pl line 3699

[nicolas]

The next release includes the " -i " command line option to specify the interface.

[dansford]

Hi,

I registered with the i command:

/usr/local/fop2/fop2_server --register -1 eth1

but i am still getting the error when I put in the command:

/usr/local/fop2/fop2_server --test

eth0: error fetching interface information: Device not found
Can't get info from ifconfig: at script/fop2_server.pl line 6631.

and unable to connect to http://<ip address>/fop2/fop2.html

attempt 1, attempt 2 and so on. Was working fine on the demo, stopped working after registration for a whitelabel license.

Using Elastix 2.2, please help.

[nicolas]

You must ALWAYS pass the -i eth1 parameter when you invoke fop2_server

/usr/local/fop2/fop2_server -i eth1 --test

You must edit the OPTIONS line for the init script and add the -i parameter to, for fop 2.24, edit /etc/sysconfig/fop2 and to the OPTIONS="" line add -i eth1.

Finally, be sure fop2 starts and keeps running

service fop2 restart
(wait 10 seconds)
pgrep fop2
(it should return the pid number)

Best regards,