Not log in on centos5
-
-
Hi, I stop the fop2 the port 4445 this closed , I forget to comment that I use pure asterisk, I don't use any asterisk gui o other version de fop
only fop2
some idea where the error can be?, I install the fop2 from the gz
service fop2 stop
Shutting dows Flash Operator Panel 2: [ OK ]netstat -an | grep 4445
-
Start fop2_server from the command line:
cd /usr/local/fop2 ./fop2_server -X 15Leave it running there, look for potential errors or something...
From the browser machine, telnet to port 4445 at the fop2 server...
telnet xxx.xxx.xxx.xx 4445Does it connect? If not, check your firewall. If it connects ok, open the browser and navigate to the fop2 page.
Be ABSOLUTELY sure you have the flash player installed and working on that browser. If everything else fails, try with another browser, firefox, chrome, IE, safari, etc..
-
ok look
./fop2_server -X 15
Flash Operator Panel 2 - No valid license found. Demo ModeCan't listen to port 4445
telnet 192.168.10.3 4445
Trying 192.168.10.3...
Connected to vxserver (192.168.10.3).
Escape character is '^]'.its ok connection
the screen of the fop2 load well, the problem is that when I put the extension to log in he never enters
-
Ok.. wait a minute
Can't listen to port 4445
That's not good... after that fop2_server will exit. Not sure what you did to get this, but it means you have another process binding to port 4445.
Did you try the netstat -lnp ??
Are you sure you are not running another instance or software binding to port 4445? After starting fop2_server with -X 15 you should see lots of events from AMI and from your flash clients.
-
when I run the command netstat -lnp and I stop the fop2, I don't see the port in listens for another program
tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN 2640/hpiod
tcp 0 0 0.0.0.0:993 0.0.0.0:* LISTEN 2813/dovecot
tcp 0 0 0.0.0.0:995 0.0.0.0:* LISTEN 2813/dovecot
tcp 0 0 0.0.0.0:389 0.0.0.0:* LISTEN 2570/slapd
tcp 0 0 0.0.0.0:646 0.0.0.0:* LISTEN 2160/rpc.statd
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 2784/mysqld
tcp 0 0 0.0.0.0:5038 0.0.0.0:* LISTEN 2972/asterisk
tcp 0 0 0.0.0.0:110 0.0.0.0:* LISTEN 2813/dovecot
tcp 0 0 0.0.0.0:143 0.0.0.0:* LISTEN 2813/dovecot
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 2120/portmap
tcp 0 0 0.0.0.0:2000 0.0.0.0:* LISTEN 2972/asterisk
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 2677/cupsd
tcp 0 0 0.0.0.0:1720 0.0.0.0:* LISTEN 2972/asterisk
tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 2879/master
tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN 2645/python
tcp 0 0 :::7777 :::* LISTEN 3301/java
tcp 0 0 :::993 :::* LISTEN 2813/dovecot
tcp 0 0 :::9090 :::* LISTEN 3301/java
tcp 0 0 :::9091 :::* LISTEN 3301/java
tcp 0 0 :::995 :::* LISTEN 2813/dovecot
tcp 0 0 :::389 :::* LISTEN 2570/slapd
tcp 0 0 :::5222 :::* LISTEN 3301/java
tcp 0 0 :::5223 :::* LISTEN 3301/java
tcp 0 0 :::5229 :::* LISTEN 3301/java
tcp 0 0 :::110 :::* LISTEN 2813/dovecot
tcp 0 0 :::1935 :::* LISTEN 2928/java
tcp 0 0 :::9999 :::* LISTEN 2928/java
tcp 0 0 :::4559 :::* LISTEN 3166/hfaxd
tcp 0 0 :::143 :::* LISTEN 2813/dovecot
tcp 0 0 :::80 :::* LISTEN 2916/httpd
tcp 0 0 :::50865 :::* LISTEN 2928/java
tcp 0 0 :::7443 :::* LISTEN 3301/java
tcp 0 0 :::5269 :::* LISTEN 3301/java
tcp 0 0 :::22 :::* LISTEN 2663/sshd
tcp 0 0 :::5080 :::* LISTEN 2928/java
tcp 0 0 :::443 :::* LISTEN 2916/httpd
tcp 0 0 :::7070 :::* LISTEN 3301/java
udp 0 0 0.0.0.0:640 0.0.0.0:* 2160/rpc.statd
udp 0 0 0.0.0.0:45699 0.0.0.0:* 3366/iaxmodem
udp 0 0 0.0.0.0:643 0.0.0.0:* 2160/rpc.statd
udp 0 0 0.0.0.0:49951 0.0.0.0:* 3229/avahi-daemon:
udp 0 0 0.0.0.0:2727 0.0.0.0:* 2972/asterisk
udp 0 0 0.0.0.0:4520 0.0.0.0:* 2972/asterisk
udp 0 0 0.0.0.0:5060 0.0.0.0:* 2972/asterisk
udp 0 0 0.0.0.0:4569 0.0.0.0:* 2972/asterisk
udp 0 0 0.0.0.0:5353 0.0.0.0:* 3229/avahi-daemon:
udp 0 0 0.0.0.0:111 0.0.0.0:* 2120/portmap
udp 0 0 0.0.0.0:631 0.0.0.0:* 2677/cupsdI stop the and I run the fop2 with the command. /fop2_server -X 15
127.0.0.1 <- NewMessages: 1
127.0.0.1 <- OldMessages: 0
127.0.0.1 <- Server: 0127.0.0.1 -> Action: MailboxStatus
127.0.0.1 -> Mailbox: 102@default127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Mailbox Status
127.0.0.1 <- Mailbox: 102@default
127.0.0.1 <- Waiting: 0
127.0.0.1 <- Server: 0127.0.0.1 -> Action: MailboxCount
127.0.0.1 -> Mailbox: 102@default127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Mailbox Message Count
127.0.0.1 <- Mailbox: 102@default
127.0.0.1 <- NewMessages: 0
127.0.0.1 <- OldMessages: 0
127.0.0.1 <- Server: 0127.0.0.1 -> Action: MailboxStatus
127.0.0.1 -> Mailbox: 101@default127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Mailbox Status
127.0.0.1 <- Mailbox: 101@default
127.0.0.1 <- Waiting: 0
127.0.0.1 <- Server: 0127.0.0.1 -> Action: MailboxCount
127.0.0.1 -> Mailbox: 101@default127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Mailbox Message Count
127.0.0.1 <- Mailbox: 101@default
127.0.0.1 <- NewMessages: 0
127.0.0.1 <- OldMessages: 0
127.0.0.1 <- Server: 0127.0.0.1 -> Action: Status
127.0.0.1 -> Action: QueueStatus
127.0.0.1 -> Action: SipPeers
127.0.0.1 -> Action: Agents
127.0.0.1 -> Action: Command
127.0.0.1 -> Command: meetme list 9000 concise
127.0.0.1 -> ActionID: meetme_9000127.0.0.1 -> Action: Command
127.0.0.1 -> Command: database show fop2state
127.0.0.1 -> ActionID: fop2state127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Channel status will follow
127.0.0.1 <- Server: 0Response: Success
Message: Channel status will follow
Server: 0127.0.0.1 <- Event: StatusComplete
127.0.0.1 <- Server: 0127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Queue status will follow
127.0.0.1 <- Server: 0Response: Success
Message: Queue status will follow
Server: 0127.0.0.1 <- Event: QueueStatusComplete
127.0.0.1 <- Server: 0127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Peer status list will follow
127.0.0.1 <- Server: 0Response: Success
Message: Peer status list will follow
Server: 0127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: 108
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: -none-
127.0.0.1 <- IPport: 0
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- Natsupport: no
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: UNKNOWN
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Server: 0127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: 106
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: -none-
127.0.0.1 <- IPport: 0
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- Natsupport: no
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: UNKNOWN
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Server: 0127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: 105
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: 192.168.10.15
127.0.0.1 <- IPport: 5060
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- Natsupport: no
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: OK (14 ms)
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Server: 0127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: 104
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: -none-
127.0.0.1 <- IPport: 0
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- Natsupport: no
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: UNKNOWN
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Server: 0127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: 103
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: 192.168.10.30
127.0.0.1 <- IPport: 5061
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- Natsupport: no
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: OK (7 ms)
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Server: 0127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: 102
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: 192.168.10.10
127.0.0.1 <- IPport: 5062
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- Natsupport: no
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: OK (30 ms)
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Server: 0127.0.0.1 <- Event: PeerEntry
127.0.0.1 <- Channeltype: SIP
127.0.0.1 <- ObjectName: 101
127.0.0.1 <- ChanObjectType: peer
127.0.0.1 <- IPaddress: 192.168.10.10
127.0.0.1 <- IPport: 5060
127.0.0.1 <- Dynamic: yes
127.0.0.1 <- Natsupport: no
127.0.0.1 <- VideoSupport: yes
127.0.0.1 <- ACL: no
127.0.0.1 <- Status: OK (29 ms)
127.0.0.1 <- RealtimeDevice: no
127.0.0.1 <- Server: 0127.0.0.1 <- Event: PeerlistComplete
127.0.0.1 <- ListItems: 7
127.0.0.1 <- Server: 0127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Agents will follow
127.0.0.1 <- Server: 0Response: Success
Message: Agents will follow
Server: 0127.0.0.1 <- Event: AgentsComplete
127.0.0.1 <- Server: 0127.0.0.1 <- Response: Follows
127.0.0.1 <- Privilege: Command
127.0.0.1 <- ActionID: meetme_9000
127.0.0.1 <- --END COMMAND--
127.0.0.1 <- Server: 0127.0.0.1 <- Response: Follows
127.0.0.1 <- Privilege: Command
127.0.0.1 <- ActionID: fop2state
127.0.0.1 <- --END COMMAND--
127.0.0.1 <- Server: 0127.0.0.1 -> Action: UserEvent
127.0.0.1 -> UserEvent: MEETME-REFRESH
127.0.0.1 -> Meetme:127.0.0.1 <- Event: UserEvent
127.0.0.1 <- Privilege: user,all
127.0.0.1 <- UserEvent: MEETME-REFRESH
127.0.0.1 <- Action: UserEvent
127.0.0.1 <- Meetme:
127.0.0.1 <- Server: 0**asterisk cli
manager show connected
Username IP Address
ragm 127.0.0.1
ragm 127.0.0.1**
-
You do not need to verify that you have the manager user connected, because you have problems with your client connections: Those will show as events in the output from fop2_server -X 15 with "=>" and "<=". So, try to telnet FROM your browser machine to the fop2 server and see if you spot the connection. Then try the same with your browser. And be sure you have a proper user defined in fop2.cfg and a proper buttonfile too.
Best regards,
-
I am having the exact same issue, except on Ubuntu 8.04
It works in our testing environment, but not in production. There are two main differences: The test environment runs a free version while the prod is registered. The production environment is also fire-walled.
Do I understand you correctly when you say that the browser has to have access to the fop2 service itself. That the event traffic does not go through apache?
-
Yes, you understood correctly. FOP and FOP2 use a flash feature called xmlsockets: it uses a direct connection between the browser (the flash plugin) and the server (fop daemon). It uses port tcp 4445 by default. If your production machine is firewalled, you will need to redirect that port, or connect via VPN.
HTML5 specification includes that feature too. So I asume in the future flash won't be needed anymore, but a direct connection to a special purpose server will still be required.
Best regards,
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login