Parking lot

[hrod761]

Hello guys, getting the following error when trying to transfer to parkinglot

Channel 'SIP/7832-00000002' sent to invalid extension but no invalid handler: context,exten,priority=fop2-park,7834,from-sip,PARK/DEFAULT,1

Buttons.cfg >>>>>>

[PARK/default]
label=Parking Main
type=park
extension=700
context=parkedcalls

res_parking.conf>>>>>>
[default]
parkext => 700
;parkext_exclusive=yes
parkpos => 711-720
context => parkedcalls
parkinghints = yes
parkingtime => 300
comebacktoorigin = yes

extensions.conf >>>>>>>>>>
[from-sip]
included => parkedcalls

[parkedcalls]
exten => 700,1,Park()
exten => 701,1,ParkedCall(default,701)
exten => 702,1,ParkedCall(default,702)
exten => 703,1,ParkedCall(default,703)

what am i missing?

Thanks.

[hrod761]

Here is our setup:

Asterisk 13 vanilla
FOP2 version 2.30.06 on separate server

[nicolas]

You are missing the fop2-park context, extract from the FOP2 README:

Non FreePBX:

Call Parking:

In order to park calls you have to add a special context to your dialplan:

[fop2-park]
exten => _X.,1,Set(ARRAY(RETURN_EXTENSION,RETURN_CONTEXT,PARKBUTTON)=${CUT(EXTEN,:,1)},${CUT(EXTEN,:,2)},${CUT(EXTEN,:,3)})
exten => _X.,2,GotoIf($["${PARKBUTTON}" = "PARK/default"?5)
exten => _X.,3,GotoIf($["${PARKBUTTON}" = ""?5)
exten => _X.,4,Set(PARKINGLOT=${PARKBUTTON:5})
exten => _X.,5,Park(,${RETURN_CONTEXT},${RETURN_EXTENSION},1,s)

This context is already created when you run the generate_override_context.pl
script at installation time.

Park Button Definition:

The autoconfiguration script will create the parking buttons itself. If
you do not use FreePBX, the correct PARK definition in buttons.cfg looks
like this:

[PARK/default]
type=park
extension=700
label=Parking
context=parkedcalls

Where default is the parkinglot.

[nilsonpena]

Same problem here! But, I´m using Asterisk 11.15 without freepbx.

When I try to park a call, it drops, and Asterisk give me the following output:

== Spawn extension (fop2-park, 1299,FUNCIONARIOS,PARK/DEFAULT, 1) exited non-zero on 'DGV/2'
[Aug 22 21:20:16] WARNING[9686][C-000001fe]: pbx.c:6646 __ast_pbx_run: Channel 'DGV/2' sent to invalid extension but no invalid handler: context,exten,priority=fop2-park,1299,FUNCIONARIOS,PARK/DEFAULT,1

I have already put fop2-park at extensions.conf and the button config at fop2.cfg.

Am I missing, something?

Thank you

[nicolas]

It is a case issue (upper/lowercase). The next release due out shortly will most probably fix that.

best regards,

[nilsonpena]

Thank you!

I´ll be waiting...

best regards,

[itcubed]

Hi,

I was getting the following error when using the [fop2-park] code above:

[31/01/2018 - 22:32] WARNING[15380][C-000001de]: pbx.c:4502 pbx_substitute_variables_helper_full: Error in extension logic (missing ']')
[31/01/2018 - 22:32] WARNING[15380][C-000001de]: ast_expr2.fl:470 ast_yyerror: ast_yyerror(): syntax error: syntax error, unexpected $end, expecting '-' or '!' or '(' or '<token>'; Input:

The reason my error was coming up is the Asterisk context code is missing ']' on lines _X.,2 and _X.,3

The correct code should be:

[fop2-park]
exten => _X.,1,Set(ARRAY(RETURN_EXTENSION,RETURN_CONTEXT,PARKBUTTON)=${CUT(EXTEN,:,1)},${CUT(EXTEN,:,2)},${CUT(EXTEN,:,3)})
exten => _X.,2,GotoIf($["${PARKBUTTON}" = "PARK/default"]?5)
exten => _X.,3,GotoIf($["${PARKBUTTON}" = ""]?5)
exten => _X.,4,Set(PARKINGLOT=${PARKBUTTON:5})
exten => _X.,5,Park(,${RETURN_CONTEXT},${RETURN_EXTENSION},1,s)

Hope this helps.

Regards,
Simon.