I can't see OOH323 trunk on panel
-
Then your button definition OOH323/UM must work. However, trunk lines will only be shown if the channel is bridged, in the capture above, the ooh323 channel is on state ringing. If that does not change to up at some point, it will not be displayed in fop2. Is the state changing to up later on?
Channel Location State Application(Data) OOH323/UM-80 (None) Up AppDial((Outgoing Line)) DAHDI/i1/100-204 s@macro-dialout-trun Up Dial(OOH323/UM/301,300,t)No activity on button while talking too.
I see that call on DAHDI trunk button, but not on OOH323.
And I don't like my trick with the fake trunk, I think there is a more attractive solution for a get trunk name from custom dial string
ADDED It's works!!! I ran fop2 in debug mode and then revert to normal. -
-
-
-
What fake trunk definition? Can you clarify?
The real custom trunk with OOH323/UM/$OUTNUM$ dial string don't displays on FOP2 and don't properly detected by autoconfig-buttons-freepbx.sh.
Then I created another custom trunk with OOH323/UM dial string but with no inbound and outbound routes attached to it.
Now I have button from that "fake" trunk and calls from real trunk on it -
[quote]
What fake trunk definition? Can you clarify?The real custom trunk with OOH323/UM/$OUTNUM$ dial string don't displays on FOP2 and don't properly detected by autoconfig-buttons-freepbx.sh.
Then I created another custom trunk with OOH323/UM dial string but with no inbound and outbound routes attached to it.
Now I have button from that "fake" trunk and calls from real trunk on it[/quote]In fop2 admin you can add the OOH323/UM string onto the channel field for the normal custom trunk, and it should work fine, without adding an additional fake trunk in freepbx. Did you try that ?
-
In fop2 admin you can add the OOH323/UM string onto the channel field for the normal custom trunk, and it should work fine, without adding an additional fake trunk in freepbx. Did you try that ?
Yes, but trunk button don't displays on panel at all with or without channel field.
-
[quote]
In fop2 admin you can add the OOH323/UM string onto the channel field for the normal custom trunk, and it should work fine, without adding an additional fake trunk in freepbx. Did you try that ?Yes, but trunk button don't displays on panel at all with or without channel field.[/quote]
You mean you do not see activity? Or the button does not display? What is the output for the trunk when running autoconfig-buttons-freepbx.sh script when you add the channel field as ooh323/um in the fop2 buttons admin page?
-
You mean you do not see activity? Or the button does not display? What is the output for the trunk when running autoconfig-buttons-freepbx.sh script when you add the channel field as ooh323/um in the fop2 buttons admin page?
Real trunk button (OOH323/UM/$OUTNUM$) don't displayed on panel
[OOH323/UM/$OUTNUM$] type=trunk label=UM queuecontext=from-queue privacy=none channel=OOH323/UM -
[quote]
You mean you do not see activity? Or the button does not display? What is the output for the trunk when running autoconfig-buttons-freepbx.sh script when you add the channel field as ooh323/um in the fop2 buttons admin page?Real trunk button (OOH323/UM/$OUTNUM$) don't displayed on panel
[OOH323/UM/$OUTNUM$] type=trunk label=UM queuecontext=from-queue privacy=none channel=OOH323/UM[/quote]
What do you mean by "don't displayed on panel"?
The button IS NOT in the pannel
or
The button IS on the panel but it does not reflect trunk activity?
-
-
-
Are you using the free version with 15 button limit? or did you create a group limiting the button display? If the button config is generated, you must see the button, unless your view is limited by any of the reasons I mention...
I am using full version, trunk button included in a group, but don't appear on panel.
-
[quote]Are you using the free version with 15 button limit? or did you create a group limiting the button display? If the button config is generated, you must see the button, unless your view is limited by any of the reasons I mention...
I am using full version, trunk button included in a group, but don't appear on panel.[/quote]
If it does not appear, it is probably because you do not have that group in your account? There is no reason for the button to NOT appear, that is quite different to now showing activity. you can try to catch me on the live help to chat, the forum is quite slow to work this out.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login