FOP2 Community Forum

Hi
Any chance of getting this fixed ?
Thanks

After ombutel update to 10.0.29-4 no user can login to the fop2
The admin is accessible but all users from either within the ombutel gui or outside of the ombutel using /fop2 get invalid credentials

Ombutel 10.0.28 with Fop2 2.31.08
All is working great except Chrome extension can't login always shows invalid credentials using the ext number with voicemail password or portal password and port 4445

Just wanted to update this for anyone who needs it
I did yum update fop2* and the update fixed the issues I was having
Thanks

Looks like on mine the fop2 config files are in /etc/fop2/

Sorry I'm not sure what that means

I am having trouble getting the ombutel v10.0.21 with fop2 2.31.08 to find the config file and connect to the ami manager
I get this messages when running fop2_server --test
Running in Demo Mode
No configuration file found!
Also I cannot login to the admin page as admin or the fop2 as a user
Can you help please

I figured this out for anyone who may need it
In the Ombutel GUI
Under PBX/Extensions/Extensions
Advanced/User Portal
Enable Portal Yes
Portal User XXXX
Portal Password XXXX
The last two are your login for the Ombutel Portal and for the FOP2
Thanks

Testing FOP2 2.31.0.5 on Ombutel 1.0.8, I installed the fop2 via yum install fop2
If I create a user in the fop2.cfg it works
But I can't seem to get the users in the FOP2 Manager to work
If I run a --test I get this
[root@localhost system]# /usr/sbin/fop2_server --test
Flash Operator Panel 2 - License file fop2.lic not found.
Running in Demo Mode
No configuration file found!
I can contact ombutel if this does not belong on this forum
Thanks

I think we are good now
Thanks for always being there to help
Danny

Nic
I am having this same problem with a Version 2.27
I would prefer if possible to reload the 1.0.0 ver plugin
I have downloaded it but I'm not sure how to re install the old version plugin
Thanks Danny

Can the addon version 2.25 loaded by the elastix addon manager be manually updated to the new 2.27 version?
Thanks Danny

Testing for a few weeks, so far with no issues on the new version
Thanks !!

I have installed to the newer version
I will monitor to see if it solves the issue
Thanks again as always for your excellent work !

Hi Nic
I am have an issue where the fop2 stops responding and the service status shows as fop2_server dead but subsys locked
If I start the service it will run for a few days or more then stop again
I have made sure the old panel is disabled and also run this from a previous post: chmod a+x /usr/local/fop2/fop2_server
I am using fop2ver 2.26 on Elastix 1.6
Can you help
Thanks Danny

Hi Nic
It would be nice to be able to fwd Voicemail messages in the Visual Voicemail
Thanks for all your great work !

Nic
I have updated to 1.2.10
Upon more review it seems that I am able to modify certain buttons but not others
For example I could add an external number to Ext 405 but not to Ext 402
Also for example I could not add zap channels 1-24 in the trunks the field just goes back to blank after you submit

Hello
Ver 2.24 FreePBX Ver 1.2.9
Elastix 1.6.2-37
FreePBX 2.5.2.2
Somehow I have made it so I can not make changes to the Fop2 buttons screen in freepbx
All other functions on the panel itself seem to be working
But for example I cannot add an external number on the Fop2 buttons screen
I have tried uninstalling the FreePBX module and reinstalling

Thanks

I am using the automatic config
Here is my Fop2.cfg
[general]
; AMI definitions
manager_host=127.0.0.1
manager_port=5038
manager_user=fop2
manager_secret=fop2secret
;event_mask=call,agent

; Daemon definitios
; listen_port = 4445
;restrict_host = www.asternic.org
;web_dir = /var/www/html/operator/fop2

; Global Config
language = en
poll_interval = 86400
poll_voicemail = 1
;monitor_ipaddress = 0

; Force blind transfer on asterisk 1.6
; blind_transfer = 1

; Force supervised transfer on asterisk 1.4
; requires the atxfer manager backport patch
; supervised_transfer = 0

; Force delimiter for asterisk applications
; force_parameter_delimiter = ","

; When adding or removing members to a queue, fop2 will default to
; AddQueueMember/RemoveQueueMember commands. If you set use_agentlogin
; to 1, together with the QueueChannel in a button definition set to
; an Agent number it will use AgentCallbackLogin and Agentlogoff instead.
;
use_agentlogin = 0

; Filename to use when start monitoring, you can use ${UNIQUEID},
; ${ORIG_EXTENSION}, ${DEST_EXTENSION}
; and date formats %Y %m %d to construct the filename.

; Master Password that overrides any individual one
master_key = 6string

; Settings for modifying the recording filename
; Available variables are:
; ${UNIQUEID} = Unique Id of the call
; ${TIMESTAMP} = Unix Timestamp when the recording was initiated
; ${DEST_EXTENSION} = Target extenstion being monitored
; ${ORIG_EXTENSION} = Extension/User that started the recording (not
; the other leg)
; Date variables:
; %Y 4 digits year
; %y 2 digits year
; %m 2 digits month
; %d 2 digits day
; %h 2 digits hour
; %i 2 digits minute
; %s 2 digits seconds

monitor_filename=g${DEST_EXTENSION}-${UNIQUEID}
monitor_format=wav
monitor_mix=true

Sorry to be a pest
I have the transfer and transfer to a station working
But now I cannot transfer to any Queue or to Park
It just hangs up
Here is the trace of a Sip DID being transferred to Queue 50
XXX.XXX.80.146 <= <msg data="1|atxfer|23|f3d868c14c77785f89883320076e82ae" />

127.0.0.1 -> Action: Redirect
127.0.0.1 -> Channel: SIP/dannylarsen-b7d27d80
127.0.0.1 -> Exten: 50
127.0.0.1 -> Context:
127.0.0.1 -> Priority: 1
127.0.0.1 -> Async: True

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Redirect successful
127.0.0.1 <- Server: 0

Response: Success
Message: Redirect successful
Server: 0

127.0.0.1 <- Event: Unlink
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel1: SIP/dannylarsen-b7d27d80
127.0.0.1 <- Channel2: SIP/10-b7b01d78
127.0.0.1 <- Uniqueid1: 1267564614.458
127.0.0.1 <- Uniqueid2: 1267564615.461
127.0.0.1 <- CallerID1: 8012053201
127.0.0.1 <- CallerID2: 10
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 10
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 0
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Hangup
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: SIP/10-b7b01d78
127.0.0.1 <- Uniqueid: 1267564615.461
127.0.0.1 <- Cause: 16
127.0.0.1 <- Cause-txt: Normal Clearing
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: QueueMemberStatus
127.0.0.1 <- Privilege: agent,all
127.0.0.1 <- Queue: 50
127.0.0.1 <- Location: SIP/10
127.0.0.1 <- MemberName: SIP/10
127.0.0.1 <- Membership: dynamic
127.0.0.1 <- Penalty: 0
127.0.0.1 <- CallsTaken: 3
127.0.0.1 <- LastCall: 1267561947
127.0.0.1 <- Status: 1
127.0.0.1 <- Paused: 0
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: SIP/dannylarsen-b7d27d80
127.0.0.1 <- Context: macro-dial
127.0.0.1 <- Extension: h
127.0.0.1 <- Priority: 1
127.0.0.1 <- Application: Macro
127.0.0.1 <- AppData: hangupcall
127.0.0.1 <- Uniqueid: 1267564614.458
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: SIP/dannylarsen-b7d27d80
127.0.0.1 <- Context: macro-hangupcall
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 1
127.0.0.1 <- Application: ResetCDR
127.0.0.1 <- AppData: vw
127.0.0.1 <- Uniqueid: 1267564614.458
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: SIP/dannylarsen-b7d27d80
127.0.0.1 <- Context: macro-hangupcall
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 2
127.0.0.1 <- Application: NoCDR
127.0.0.1 <- AppData:
127.0.0.1 <- Uniqueid: 1267564614.458
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: SIP/dannylarsen-b7d27d80
127.0.0.1 <- Context: macro-hangupcall
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 3
127.0.0.1 <- Application: GotoIf
127.0.0.1 <- AppData: 1?skiprg
127.0.0.1 <- Uniqueid: 1267564614.458
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: SIP/dannylarsen-b7d27d80
127.0.0.1 <- Context: macro-hangupcall
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 6
127.0.0.1 <- Application: GotoIf
127.0.0.1 <- AppData: 0?skipblkvm
127.0.0.1 <- Uniqueid: 1267564614.458
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: SIP/dannylarsen-b7d27d80
127.0.0.1 <- Context: macro-hangupcall
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 7
127.0.0.1 <- Application: NoOp
127.0.0.1 <- AppData: Cleaning Up Block VM Flag: BLKVM/10/SIP/dannylarsen-b7d27d80
127.0.0.1 <- Uniqueid: 1267564614.458
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: SIP/dannylarsen-b7d27d80
127.0.0.1 <- Context: macro-hangupcall
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 8
127.0.0.1 <- Application: DBdel
127.0.0.1 <- AppData: BLKVM/10/SIP/dannylarsen-b7d27d80
127.0.0.1 <- Uniqueid: 1267564614.458
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: SIP/dannylarsen-b7d27d80
127.0.0.1 <- Context: macro-hangupcall
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 9
127.0.0.1 <- Application: GotoIf
127.0.0.1 <- AppData: 1?theend
127.0.0.1 <- Uniqueid: 1267564614.458
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: SIP/dannylarsen-b7d27d80
127.0.0.1 <- Context: macro-hangupcall
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 11
127.0.0.1 <- Application: Hangup
127.0.0.1 <- AppData:
127.0.0.1 <- Uniqueid: 1267564614.458
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Hangup
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: SIP/dannylarsen-b7d27d80
127.0.0.1 <- Uniqueid: 1267564614.458
127.0.0.1 <- Cause: 16
127.0.0.1 <- Cause-txt: Normal Clearing
127.0.0.1 <- Server: 0