FOP2 Community Forum

Is there a way for FOP2 users to change their own passwords? If there is not then can this be added as a feature in the future.

Is there a list describing what each permission does for FOP2? Some are explanatory but some seem not to be.

What are the minimal permissions that a user needs? It would be nice if there were some built-in templates for a standard user, admin, power user.

Nicolás

Thank you. That worked. It even has the apostrophe so the customer will be happy.

Thanks for all your hard work. I am looking forward to the next version of FOP2.

Regards
Alan

Nicolás

I just purchased a license code for FOP2 with the Voicemail Explorer. I received the code and registered. After the registration FOP2 does not work. After I log in the main page of extensions will not display. I think the problem is that when I registered I used the name "Woman's Health Center" with an apostrophe character ' in the name. Is it not possible to use the apostrophe character in the name? If I revoke the license and use the free version the system works? If it is not possible to use the apostrophe character in the name how to I re-register without it?

Thanks
Alan

That worked. Thank you.

I have a FreePBX 2.9 system and installed FOP2. When I try to log in I get the message connecting to server. After many attempts I get a message that the server is not available.

I have disables iptables and still the same problem.

Here are some debug logs.

** DIGEST_EVENT: start

** PROCESA_BLOQUE 0
** PROCESA_BLOQUE MESSAGEWAITING 0

It's blessed into class Extension

DIGEST canal SIP/501, comando voicemail, datos 0, slot

DIGEST canal SIP/501, comando voicemailcount, datos &vmail_count!0!0, slot

** MAIN New client connection 192.168.250.77
** MAIN New client connection 192.168.250.77

** MAIN AMI event received...

HTML5 Web Socket Connection

websocket handshake version hiby v8

HTTP/1.1 101 Switching Protocols
Upgrade: WebSocket
Connection: Upgrade
Sec-WebSocket-Accept: UJ3Mzq/G3BJMXwV1dugyNWyLsyQ=

192.168.250.77 => HTTP/1.1 101 Switching Protocols
Upgrade: WebSocket
Connection: Upgrade
Sec-WebSocket-Accept: UJ3Mzq/G3BJMXwV1dugyNWyLsyQ=

** MAIN AMI event received...
** MAIN Processing command received from flash clients...

192.168.250.77 <= <msg data="GENERAL|contexto|1|" />

-- PROCESS_FLASH_COMMAND origen GENERAL accion contexto destino 1 password

192.168.250.77 => { "btn": "0", "cmd": "key", "data": "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX", "slot": "" }

192.168.250.77 => { "btn": "0@GENERAL", "cmd": "version", "data": "2.26!XXXXXXXXXXXXXXXXXXl, IL!1", "slot": "" }

** MAIN New client connection 127.0.0.1

** MAIN AMI event received...
** MAIN Processing command received from flash clients...

127.0.0.1 <= <msg data="GENERAL|contexto|1" />

-- PROCESS_FLASH_COMMAND origen GENERAL accion contexto destino 1 password

127.0.0.1 => { "btn": "0", "cmd": "key", "data": "XXXXXXXXXXXXXXXXXXXXh", "slot": "" }

127.0.0.1 => { "btn": "0@GENERAL", "cmd": "version", "data": "2.26!XXXXXXXXXXXXXXXXXXXXXXXXL!1", "slot": "" }

** MAIN AMI event received...
** MAIN Processing command received from flash clients...

127.0.0.1 <= <msg data="GENERAL|checkauth|301|3cd6b224aae4a683d2ced1942e813762" />

-- PROCESS_FLASH_COMMAND origen GENERAL accion checkauth destino 301 password 3cd6b224aae4a683d2ced1942e813762

** CLEAN SOCKET connection lost removing socket IO::Socket::INET=GLOB(0x111d5c54)
** CLEAN SOCKET flash client connection lost

Flash clients connected: 2

192.168.250.77:62837 IO::Socket::INET=GLOB(0x1114ec18), none
192.168.250.77:62838 IO::Socket::INET=GLOB(0xeaccd80), none

** MAIN closing 192.168.250.77

** CLEAN SOCKET connection lost removing socket IO::Socket::INET=GLOB(0x1114ec18)
** CLEAN SOCKET flash client connection lost

Flash clients connected: 1

192.168.250.77:62838 IO::Socket::INET=GLOB(0xeaccd80), none

** MAIN End of block from localhost

127.0.0.1 <- Event: PeerStatus
127.0.0.1 <- Privilege: system,all
127.0.0.1 <- ChannelType: SIP
127.0.0.1 <- Peer: SIP/800
127.0.0.1 <- PeerStatus: Registered
127.0.0.1 <- Address: 10.253.181.59:5060
127.0.0.1 <- Server: 0

** MAIN AMI event received...
** MAIN There's an 'Event' in the event block
** MAIN Event detected block_count = 1 (Event: PeerStatus)
** MAIN There are 1 blocks for processing
** MAIN Answer block cleared

** DIGEST_EVENT: start

** PROCESA_BLOQUE 0
** PROCESA_BLOQUE PEERSTATUS 0

SET QUALIFY para SIP/800 lo dejo como estaba ok

** MAIN End of block from localhost

127.0.0.1 <- Event: PeerStatus
127.0.0.1 <- Privilege: system,all
127.0.0.1 <- ChannelType: SIP
127.0.0.1 <- Peer: SIP/8009
127.0.0.1 <- PeerStatus: Registered
127.0.0.1 <- Address: 10.253.181.59:5060
127.0.0.1 <- Server: 0

** MAIN AMI event received...
** MAIN There's an 'Event' in the event block
** MAIN Event detected block_count = 1 (Event: PeerStatus)
** MAIN There are 1 blocks for processing
** MAIN Answer block cleared

** DIGEST_EVENT: start

** PROCESA_BLOQUE 0
** PROCESA_BLOQUE PEERSTATUS 0

SET QUALIFY para SIP/8009 lo dejo como estaba ok

Exiting...

I have a customer with 2 store locations. Both locations have their own dedicated FreePBX systems each with a FOP2 license. The store locations are connected via a VPN. I have IAX2 trunk setup between the two stores and routing in place to allow the systems to call over the IAX2 trunk,

The owner of the business wants the ability to monitor calls on both systems from a single location. The owner is usually at store 1 and uses FOP2 to spy on calls. Is there a way to configure FOP2 so that he can also spy on the calls at store 2?

My current plan is to program the Polycom phone to register an extension from each server. This would give the ability for the owner to access the individual FOP2 instances at each store and listen to calls. The only problem is that he will have to log into two different FOP2 instances (one at each store) to monitor calls.

I am running FreePBX. If I download the version that you provide on this site will I have problems? What are the issues?

I was curious if the original FOP works with Asterisk 1.8 and greater? Do all the features of FOP work correctly?

I did not realize that you had to look at the phone book to see the call recordings.

I am not understanding. Are the recordings viewable from the FOP2 interface?

I have installed FreePBX from the distribution provided at freepbx.org. it is not elastix or Trixbox.

What is the FOP2 recording tab? I was looking for the recordings in the User Portal.

I have the following uncommented

monitor_exec=/usr/local/fop2/recording_fop2.pl

It is set to run as user asterisk

-rwxr-xr-x 1 asterisk asterisk 6870 Jul 14 06:49 recording_fop2.pl

Here are the sox and soxmix.

[root@biaggis-blm-ipt1 fop2]# which sox
/usr/bin/sox
[root@biaggis-blm-ipt1 fop2]# which soxmix
/usr/bin/soxmix

I have this in fop2recordings

select * from fop2recordings;
+----+--------------+---------------------+----------------+-----------------+-----------------------------------------------------------------------------+----------+---------+
| id | uniqueid | datetime | ownerextension | targetextension | filename | duration | context |
+----+--------------+---------------------+----------------+-----------------+-----------------------------------------------------------------------------+----------+---------+
| 1 | 1342500033.3 | 2012-07-16 23:40:53 | 210 | 206 | /var/spool/asterisk/monitor/fop2/2012-07-16/210_206_234046_1342500033.3.wav | 7 | |
+----+--------------+---------------------+----------------+-----------------+-----------------------------------------------------------------------------+----------+---------+
1 row in set (0.00 sec)

I have a FreePBX distro install version 1.812.210.57-1. I have removed iSymphony and replaced it with FOP2. I like FOP2 better because it is far easier to use.

I can record calls and can see them in /var/spool/asterisk/monitor but they do not show up in the user portal. I checked the userfield in the CDR database and there is no file name.

I am not sure how to debug this. Any pointers would be appreciated.

Is FOP2 installed. I do not think that the admin module actually installs the FOP2 software.

I just built 2 FreePBX installs from the FreePBX distro. I had to uninstall iSymphony and manually install FOP2 software and then the FOP2 admin module.

How did you install FreePBX? Was it a distro or built by hand?

I have many requests for Drag and drop. It would be a nice feature.

Those new features sound great. Do you have a release date? Do you need beta testers?

Is there a way to limit what functions can be used per extension?

Example. I want Ext. 6000 to be able to listen to calls on Ext. 6001 but not be able to listen to calls on Ext. 6002.