cat /etc/sysconfig/fop2
OPTIONS="-d -i eth1"

service fop2 status

Output: fop2_server dead but sbsys locked

service fop2 reload

output: Reloading Flash Operator Panel 2 configuration: [Failed]

I have changed the eth1 as mentioned new NIC.

cat /etc/sysconfig/fop2
OPTIONS = "-d"

/usr/local/fop2/fop2_server --test
eth0: error fetching interface information: Device not found

Fop2 was unable to find eth0 interface to bind the license to.
Please specify a valid NIC name with -i command line parameter, for example

/usr/local/fop2/fop2_server --test -i eth1

Flash Operator Panel 2 - Invalid License for this machine
Flash Operator Panel 2 - White Label Version
Flash Operator Panel 2 - Valid License (7)

Failed to connect with asterisk - 192.168.1.104:5038
Error Message: Login Failed to Asterisk (bad auth) at 192.168.1.104:5038. Check your manager credentials.

How may I able to rectify these issue

Hi Nicolas,

I tried emailed you regarding Fop2 connection which is providing me error:

"fop2_server dead but subsys locked".

I have followed the instruction as per the documentation you have mentioned. Nicolas I would like you to help us one more time. I have attached the screenshot.

I have tried but still is same "FOP2 Server is not responding. Be sure the service is running!" and another problem occurred as my extension on FOP2 panel in Elastix only showing one extension other extension as not.
I want to logout from my ext. but cannot logout. Please help

I have installed elastix and also installed fop2 manager, beside I have created users but still i cannot login. Please can you help me how may rectify this issue.

Thank you

Hello experts.

I have setup Elastix and Fop2 & Fop2 manager but now I have issue as per the screenshot given.

Issue 1. After installing fop2 from my elastix from command line it just only showing me blank screen as per issue1.png
Issue 2. after upgrade fop2 manager from version 1.0.0 to 1.0.4 server not responding.

Please do help me regarding the above issue.