FOP2 Community Forum

Using the Call Flow plugin with FreePBX, the switch's state sets correctly when the time condition is overridden (such as when dialing the feature code from another phone), but not when the clock rolls over and the time condition changes itself.

Looking at a debug trace of fop2, it seems that the position of the switch is set by the condition of the /TC/1 (or whatever number) entry in the asterisk database. However, that database entry is set only when the time condition is manually overridden.

It seems like the device state "CUSTOM:TC1" (or whatever number) might be a better indicator of where the switch is supposed to be, as it seems to be set accurately whether the time condition is manually overridden or switched manually.

Yes, I'm sorry, I actually mistyped the version number in my original post; it is 2.8.0.3; the most recent one (and based on Asterisk 1.6).

The odd thing is that I ran the fop2 server in debug/verbose mode and captured the following:

On the trunk:

127.0.0.1       <- Event: NewCallerid
127.0.0.1       <- Privilege: call,all
127.0.0.1       <- Channel: SIP/EMIS-ntt1-000000cc
127.0.0.1       <- CallerIDNum: 090xxxxxxxx
127.0.0.1       <- CallerIDName: awh Mobile
127.0.0.1       <- Uniqueid: 1266823128.213
127.0.0.1       <- CID-CallingPres: 0 (Presentation Allowed, Not Screened)
127.0.0.1       <- Server: 0

But on the extension:

127.0.0.1       <- Event: NewCallerid
127.0.0.1       <- Privilege: call,all
127.0.0.1       <- Channel: SIP/7427-000000ce
127.0.0.1       <- CallerIDNum: 600
127.0.0.1       <- CallerIDName:
127.0.0.1       <- Uniqueid: 1266823129.215
127.0.0.1       <- CID-CallingPres: 0 (Presentation Allowed, Not Screened)
127.0.0.1       <- Server: 0

"600" is the name of the ring group. If I call an extension directly (IE, a DID that does not use Ring Groups) it would say something like <- CallerIDNum: 7427

You can see that the right CallerIDNum and CallerIDName is on the trunk. Also, the actual CID displays on the handset show the correct thing; it's only FOP that is picking up this "600" from somewhere...

Hi there,

I have installed FOP2 on Trixbox CE 1.8.

When there is an inbound call to my extension, I get a little popup on my screen. It also shows up in the extension button. The problem is, it doesn't display the Caller ID; rather it displays the destination of my call. If I do a Direct-Dial, it shows the extension that I am calling; if I call a Ring Group, it shows that ring group's number.

Once the call connects, the correct Caller ID is displayed.

Does anyone know how to make the correct Caller ID display before the call is connected?

Thanks,