None of the buttons work . I select an active extension then I hit the listen button. My extension does not ring.
From My phone I can activate the channel spy, so I know that asterisk is working.
using asterisk version 1.60.26 and FOP2 version 2.23
trixbox ce
buttons.cfg
[SIP/200]
type=extension
extension=200
label=Receptionist
mailbox=200@default
context=from-internal
queuecontext=from-internal
extenvoicemail=*200@default
privacy=none
queuechannel=Local/200@from-internal/n|Penalty=0|MemberName=Receptionist|StateInterface=SIP/200|Queue=6001
originatechannel=Local/200@from-internal
customastdb=CF/200
[SIP/201]
type=extension
extension=201
label=Irving Figueroa-ABC
mailbox=201@default
context=from-internal
queuecontext=from-internal
extenvoicemail=*201@default
privacy=none
group=Shipping
queuechannel=Local/201@from-internal/n|Penalty=0|MemberName=Irving Figueroa-ABC|StateInterface=SIP/201
customastdb=CF/201
manager.conf
[admin]
secret = *************
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read =all,system,call,log,verbose,command,agent,user
write =all,system,call,log,verbose,command,agent,user
fop2.cfg
[general]
; AMI definitions
manager_host=localhost
manager_port=5038
manager_user=fop2
manager_secret=************
;event_mask=agent,call,command,system,user,dialplan
; Daemon definitios
listen_port = 4445
;restrict_host = www.asternic.org
;web_dir = /var/www/html/operator/fop2
; Global Config
poll_interval = 86400
poll_voicemail = 1
monitor_ipaddress = 0
; Force blind transfer on asterisk 1.6
blind_transfer = 1
; Force supervised transfer on asterisk 1.4
; requires the atxfer manager backport patch
; supervised_transfer = 1
; Force delimiter for asterisk applications
force_parameter_delimiter = ","
; When adding or removing members to a queue, fop2 will default to
; AddQueueMember/RemoveQueueMember commands. If you set use_agentlogin
; to 1, together with the QueueChannel in a button definition set to
; an Agent number it will use AgentCallbackLogin and Agentlogoff instead.
;
; use_agentlogin = 0
; Master Password that overrides any individual one
master_key = 7270
; Options to send to chan_spy when doing a Listen action
; This global setting is overriden by the individual button
; spyoptions directive if set (in the button config).
; Asterisk 1.6.1 or higher has the option "d" that lets you
; switch spying modes using the keypad:
4 = spy mode
5 = whisper mode
;6 = barge mode
;spy_options="q"
spy_options="bq"
; Options to send to chan_spy when doing a Whisper action
; In Asterisk 1.6.1 or higher you can use B to enable barge (speak
; to both channels on a call).
whisper_options = "w"
; When you spy to an ongoing call, your spy session will end as
; soon as the conversation you are listening to finishes. If you
; rather keep the chan spy session open after the call end, uncomment
; the following line.
;persistent_spy=1