FOP2 Community Forum

I too am having this error. I have to do a service fop2 restart to clear it.

Had one of our users have "Flash Player Required" pop up this morning.

I verified flash is installed and working.

XP 32bit, IE 8.0.6001.18702, Flash 11.1.102.62
FOP2 2.24
I cleared cache.

Tried uninstalling flash and reinstalling.

-Greg

Was trying to 'listen' in on an extension and discovered an interesting bug.

Asterisk 10
Freepbx 2.10
Fop2 2.24

Call out via iax trunk. Call was muted on our end.

I used fop2 to 'listen' in on said call by highlighting the extension then clicking the ear.

I couldn't hear anything. When I hung up my end, fop2 showed I still had a line in use. SIP Show Channelstats confirmed the same. Tried listening in again to see if that would clear it but it only added another channel.

Channel request hangup did not work.

Un-muting the main call didn't affect the orphaned channels.

Hanging up the main call did result in the channels being hungup/released.

Reproducible.

-Greg

--test returns the desired response:
Flash Operator Panel 2 - Valid License (1)
Connection to manager OK!

This is a licence we got in 2009. We upgraded/updated in May 11 at which time we bought a license upgrade. You had to reset something at that time I believe to get it going.

I usually chat with you on gmail, so I'll keep an eye out when you hop online again.

-Greg

I built up a new box with ast10 and just put it online.

Went to revoke on the old box and got "Serial code not available for revokation on this machine!"

The code I'm using is the upgrade code we bought in May of last year.

Same version of fop2 on both machines.

-Greg

Thanks to Nicolas's help, a simple emptying of the browser cache fixed my problem.

I've upgraded to 2.24 but am having issues. At first, Chrome would connect but there would be a gray box at the bottom of the screen with what looks like some code in it. But everything else was functional.

Was unable to access the phonebook, so I went into the fop2 freepbx module and did a fop2 permissions update (hadn't don't before, did it individually in the users module before). Now, unable to connect to the panel using chrome at all. It is at the "One Moment Please" screen with the little circle rotating. No attempts.

I did a service fop2 restart, but that didn't work either.

IE8 works fine.

Issue ended up being with FOP1 interfering. I have it disabled now and things look to be working normally.

Thank you for the online chat help!!

My XP virtual machine had a firefox update this morning and is now exhibiting the same issue. I'll do a capture as suggested.

Mine is instantaneous. That is, I can start up the panel, see a current phone call yet if that phone call hangs up, it doesn't show on the fop2 panel. It still shows connected until I do a page refresh.

I keep an XP virtual open all day anyways and I'm the only one using Ubuntu, so I'll just live with it. Though it would be nice if it could be addressed.

Did you find out any workaround for this?

I have the exact same issue with my Firefox/Ubuntu system.

XP virtual works fine though.

They are stored in the normal area as if you were to record the call using your handset (*1).

In PIAF, I just go to Recordings from the kennonsoft menu for the user the recording is for.

Updated to IE 8 and all is working well now.

Yup, I noticed that when I updated for the call pickup. I saw in the trunks, the trunk number.

Great work!

That works the way I would expect it to now. Thank you!

Let me know. I don't have it as a trunk in my freepbx setup. It just shows up there on fop2. It is this fax solution posted over at PIAF:
[url:1mf9d92k]http://pbxinaflash.com/forum/showthread.php?t=3645[/url:1mf9d92k]
And more specifically, this is where the extension is setup:
[url:1mf9d92k]http://pbxinaflash.com/forum/showpost.php?p=22682&postcount=67[/url:1mf9d92k]

While a phone/extension is ringing, I press that button and then press Call Pickup. My phone rings and when I answer it just hangs up. Am I doing it wrong?

I've successfully updated the kennonsoft menu to reference fop2 instead of fop1 by changing
/var/www/html/welcome/.htindex.cfg
changing:
1,panel,./panel,Flash Operator Panel,ico_fop.png

to:

1,panel,./fop2,Flash Operator Panel,ico_fop.png

I use firefox and it worked fine. Trying it out on a worker's computer though, it locked up Internet Explorer. When I tried IE on my computer, it locked it up as well.

Going to http://mypbx.com/fop2 works fine though.

Any ideas what is going on?

We have 12 ZAP channels through a PRI.

FOP2 is displaying a single button with the active channels within it (as it is supposed to). But the label of the active channels is always ZAP/1. Is there a way for it to show the actual ZAP channel utilized?

First off, thank you for such a nice product. I had troubles at first trying to figure out why I couldn't see my trunks. Turns out it was because I hit the 15 button limit. I went ahead and purchased the full version and am very pleased.

I have an iaxmodem setup on an extension for my avantfax/hylafax. With FOP1, it shows up as an extension and when sending a fax, or receiving a fax, it shows the activity as it should. But with FOP2, it lists the extension and shows it as a trunk. When a fax is sent or received, the extension shows nothing but the trunk shows activity.

Anyway to fix this so it isn't listed as a trunk and when there is activity it shows up on the extension?

I use the auto config for the buttons with the only change being two zap extensions added to the end of the file.