FOP2 Community Forum

OK that helped. Thanks.

I tried different combinations: just one digit like 1, 2, 3, set or range 1-2, 1-10, 1-30, nodifference. When there are active calls output is (one incoming from 6yyyyyyyy to SIP393 and one outgoing from SIP917 to 6xxxxxxxx, changed not to show numbers) :

Channel              Location             State   Application(Data)
SIP/917-00038cb4     s@macro-dialout-trun Ring    Dial(DAHDI/g0/6xxxxxxxx,300,Tt
DAHDI/i1/6yyyyyyyy-1 s@macro-dial-one:42  Ring    Dial(SIP/939,,Ttr)
DAHDI/i1/6xxxxxxxx-1 6xxxxxxxx@from-pstn: Dialing AppDial((Outgoing Line))
SIP/939-00038cb3     939@from-internal:1  Ringing AppDial((Outgoing Line))
4 active channels
2 active calls
315243 calls processed

I have Asterisk 1.8.11.1+FreePBX 2.9.0.12+FOP2+FOP2 2.26+Admin 1.2.10 on CentOS 5.5 i686. Untill today I used fop2 lite, today bought basic version. After that I wanted to add trunks to panel, but simply adding it in Fop2 buttons and specifying channels did not work. Button is visible in panel, but is empty all the time. Other extension and queue buttons work just fine without any problems. Load is rather low, one call every 3-5 second. Trunks are "ZAP Trunk (DAHDi compatibility Mode)" run on Sagoma A101 card and "Custom trunk" on ISDN modem (Cologne Chip Designs GmbH ISDN [HFC-PCI]). Any suggestions?