FOP2 Community Forum

Hello!

I have done some further testing and I can get it to work with alpha characters, but only with sip peer names with all upper case letters. It appears that there is a case sensitive issue with the sip peer name.

Thanks,
-Matt

Hello!

Sorry for the delay of a response. So here is what the debug displayed:

XXX.XXX.XXX.XXX   -> Action: Command
XXX.XXX.XXX.XXX   -> Command: database put fop2state SIP/PHONE3070 "Do not Disturb"

XXX.XXX.XXX.XXX   -> Action: UserEvent
XXX.XXX.XXX.XXX   -> UserEvent: FOP2ASTDB
XXX.XXX.XXX.XXX   -> Family: fop2state
XXX.XXX.XXX.XXX   -> Channel: SIP/phone3070
XXX.XXX.XXX.XXX   -> Value: Do not Disturb

XXX.XXX.XXX.XXX   <- Response: Follows
XXX.XXX.XXX.XXX   <- Privilege: Command
XXX.XXX.XXX.XXX   <- Updated database successfully
XXX.XXX.XXX.XXX   <- --END COMMAND--
XXX.XXX.XXX.XXX   <- Server: 0

XXX.XXX.XXX.XXX   <- Event: UserEvent
XXX.XXX.XXX.XXX   <- Privilege: user,all
XXX.XXX.XXX.XXX   <- UserEvent: FOP2ASTDB
XXX.XXX.XXX.XXX   <- Action: UserEvent
XXX.XXX.XXX.XXX   <- Family: fop2state
XXX.XXX.XXX.XXX   <- Channel: SIP/phone3070
XXX.XXX.XXX.XXX   <- Value: Do not Disturb
XXX.XXX.XXX.XXX   <- Server: 0

I have tried the beta ([url:lh7kvia9]http://www.fop2.com/downloads/fop2.tgz[/url:lh7kvia9] (centos 5, 32 bits)) with no success.

Thanks,
-Matt

Hello!

Thanks for the quick response!

I am currently using Asterisk 1.4.18 compiled from source, not Trixbox, in our production environment. I did try the "all" permission to the manager user with no success.

Thanks,
-Matt

Hello!

Everything in FOP2 installed great! But, I have this issue with the Presence Updating. It seems when I change the value, it requires me to refresh the browser to get it to show. I have scavenged your forums and have found someone else with the exact same issue: [url:sj3fajxk]http://www.fop2.com/forum/View Post 88&p=314&hilit=presence+update#p314[/url:sj3fajxk]

Here is some of my config:

Manager.conf

[fop2]
secret = XXXXXXXXXXX
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.255
permit=XXX.XXX.XXX.XXX/255.255.0.0
permit=XXX.XXX.XXX.XXX/255.255.255.255
permit=XXX.XXX.XXX.XXX/255.255.255.255
read = system,call,log,verbose,command,agent,user,config,originate
write = system,call,log,verbose,command,agent,user,config,originate

As a side note: I am running the FOP2 server on a separate server, not locally with Asterisk 1.4. All other functions work great. It is the presence status that is not showing changes when applied. What am I missing?

Any help is greatly appreciated!

Thanks,
-Matt