FOP2 Community Forum

Now these same extensions, the buttons do not go orange. If I call them, my button goes orange but their button stays green and inactive. Privacy set to none.

Make sure there is an fop2 user in manager_custom.conf - it should look something like this:

[fop2]
secret=somepassWord
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read=all
write=all
writetimeout=1000
eventfilter=!Event: RTCP*
eventfilter=!Event: VarSet
eventfilter=!Event: Cdr
eventfilter=!Event: AGIExec
eventfilter=!Event: ExtensionStatus
eventfilter=!Event: ChannelUpdate
eventfilter=!Event: ChallengeSent
eventfilter=!Event: SuccessfulAuth
eventfilter=!Event: HangupRequest
eventfilter=!Event: SoftHangupRequest
eventfilter=!Event: MusicOnHold
eventfilter=!Event: LocalBridge

Version: 2.31.32

@MKEbrew said:
This is happening to two of my users buttons constantly. I cannot find any reason for this so far.

This is happening to two of my users buttons constantly. I cannot find any reason for this so far.

Figured out the transfer problem. Wasn't FOP at all - it was my custom override in the dialplan. Why I can't get FOP2 debug working is another issue, but I'm moving on for now.

This is a new-ish install. I have extenvoicemail setup with @ext-local, which was done automatically. Works fine as long as it is not a queue call. If the call comes from a queue and transfer to voicemail is attempted, the call is disconnected. I cannot seem to figure out why this is. Hoping someone here has an idea.
I've tried to enable debugging, but I'm not getting a debug log anywhere, either.

FreePBX on Sangoma Linux release 7.8.2003 (Core)
/etc/sysconfig/fop2 contains OPTIONS="-d -X 511 /var/log/asterisk/"

I've "hacked" fop2manager.css to hide a range of extensions using css wildcards, which works but is not favorable. Hoping there is a better way.

The paypal button did not work for me. If that is that same problem you are having, I was able to check out as guest with an email address that did not already have a paypal account.

I don't think I am searching the right terms for this. I'm looking for a way to hide buttons from the buttons list in FOP2 manager. I have a lot of buttons that I don't display, so anytime I need to edit buttons I'm scrolling forever and it gets tedious.

Makes perfect sense, thanks for your help.

Ok, doing that, I see this activity:

127.0.0.1            <- Event: PeerEntry
127.0.0.1            <- Channeltype: SIP
127.0.0.1            <- ObjectName: 4807
127.0.0.1            <- ChanObjectType: peer
127.0.0.1            <- IPaddress: x.x.x.x
127.0.0.1            <- IPport: 5060
127.0.0.1            <- Dynamic: yes
127.0.0.1            <- Forcerport: no
127.0.0.1            <- VideoSupport: no
127.0.0.1            <- TextSupport: no
127.0.0.1            <- ACL: yes
127.0.0.1            <- Status: OK (2 ms)
127.0.0.1            <- RealtimeDevice: no

127.0.0.1            <- Response: Follows
127.0.0.1            <- Privilege: Command
127.0.0.1            <- ActionID: 8
127.0.0.1            <- /fop2state/SIP/4807                               : Do not Disturb
1 results found.

127.0.0.1            <- Response: Success
127.0.0.1            <- ActionID: 86
127.0.0.1            <- Message: Mailbox Status
127.0.0.1            <- Mailbox: 4807@default
127.0.0.1            <- Waiting: 0

127.0.0.1            <- Response: Success
127.0.0.1            <- ActionID: 87
127.0.0.1            <- Message: Mailbox Message Count
127.0.0.1            <- Mailbox: 4807@default
127.0.0.1            <- UrgMessages: 0
127.0.0.1            <- NewMessages: 0
127.0.0.1            <- OldMessages: 0

127.0.0.1            <- Event: PeerStatus
127.0.0.1            <- Privilege: system,all
127.0.0.1            <- ChannelType: SIP
127.0.0.1            <- Peer: SIP/4807
127.0.0.1            <- PeerStatus: Registered
127.0.0.1            <- Address: x.x.x.x:5060

Seems that FOP2 reflects when DND is activated, but not when it's deactivated. I will have to use the feature code to get FOP2 to reflect available again, and sometimes I have to use the feature code twice. I'm wondering if there are too many events for FOP2 to keep up?

Which Debug level? I've added the "all" permission to manager.conf and restarted FOP2. It in fact does register the DND, but when I change back to available, it does not register. I have to dial the feature code to toggle the status in FOP2

I guess I was wrong and it does update astDB, but is maybe using a custom presence. See this thread: http://forums.asterisk.org/viewtopic.php?f=49&t=95036

We use Digium D70 phones with FreePBX. I have been running FOP2 for a couple years now, and we'd like to start taking advantage of presence. What I'm learning is that the presence icon will change on FOP only if setting DND via a feature code. Presence does not update when selecting DND via the soft-key on the actual phone. Is it possible to have FOP2 recognize when DND is set directly on the phone? I do know that hints are created for DND, but I don't know that FOP2 uses hints.

Thanks you.