FOP2 Community Forum

[root@VoIP fop2]# netstat -nlp |grep 445
tcp 0 0 0.0.0.0:4445 0.0.0.0:* LISTEN 28846/fop2_server
[root@VoIP fop2]#

Does not seem to be a FOP1 conflict either.

When I go to http://server_IP/fop2/ I just get "One moment Please" and a spinning circle.
A test comes back ok
[root@VoIP fop2]# /usr/local/fop2/fop2_server --test
Flash Operator Panel 2 - White Label Version
Flash Operator Panel 2 - Valid License (/usr/local/fop2/fop2.lic)
Flash Operator Panel 2 - Featureset: Basic
Flash Operator Panel 2 - Allowed Tenants: 5

Connection to manager OK (010100)!

Is there a log somewhere that will tell me why it is stuck?

Installed my licence key, edited the fop2.cfg to allow the custom buttons file.

In my buttons.cfg i have

[DAHDI/1]
type=trunk
label=DAHDI
channel=DAHDI/2
channel=DAHDI/3
channel=DAHDI/4

restarted the fop2 service, i login i get my custom buttoms layout, and the extentions activity show but no trunk activity.

Why is the activity on the trunks not showing?

Installed from market place and it worked fine. When installing via the market place are the config files for the extentions/trunks in a different place than /usr/local/fop2 ?

Trying to install FOP2 using this guide http://www.elastixconnection.com/index. ... &Itemid=97 and i get as far as the reboot the server then run /usr/local/fop2/fop2_server --test , i get command not found, but i can see fop2_server in /usr/local/fop2/

I saw something about exec permissions on a temp folder can sometimes cause this and to create a folder in /usr/local/fop2 called temp and then edit the init file with this temp path and try again, but have no idea where this init file or thing is.