FOP2 Community Forum

Thank you Nicolas... You are correct!

It is working from the extension but it does not show the active call for some reason... so I cannot see when someone is on the phone... What is your advice?

Hello,

The action buttons across the top do not do anything. I tried debugging and everything else I could find on the forum. What are the different things that can cause a button to not work (whisper, dial, transfer, etc.) The only one that seems to work is the hangup button.

Running trixbox CE with Asterisk 1.4.22-4

Ok... deleted that _additional and it worked immediately. Thanks again Nicolas!

Ok. I found another admin user in _additional and the permissions did not say "originate". Should I delete the user in _additional or just add the correct permission? Thank You...

I'm using the fop2 admin module to add users. Here is fop2 section regarding users. Do I need to add something here?

;user=620all:queues
;user=621dial,transfer,pickup:deptA
;user=622all
;user=623meetme,pickup
;buttonfile=buttons.cfg
; ------ END SAMPLE ------

; This line is NOT commented, it executes
; the autoconfig configuration for FreePBX
#exec autoconfig-users-freepbx.sh

This is on the top:

AMI definitions
manager_host=localhost
manager_port=5038
manager_user=admin
manager_secret=amp111

We are not able to use the listen function. In fact, only the dial button actually works.

Here is my manager.conf:
;
; Asterisk Call Management support
;
[general]
enabled = yes
port = 5038
bindaddr = 127.0.0.1

[admin]
secret = amp111
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = all,system,call,log,verbose,command,agent,user,originate
write = all,system,call,log,verbose,command,agent,user,originate

#include manager_additional.conf
#include manager_custom.conf

I run fop2 in debug mode and get "permission denied" when I try the buttons. The only one that works is the dial button. What else needs to be added here to make this work?

127.0.0.1 -> Action: Originate
127.0.0.1 -> Channel: SIP/742
127.0.0.1 -> Application: ChanSpy
127.0.0.1 -> Data: SIP/737
127.0.0.1 -> Async: True

127.0.0.1 <- Response: Error
127.0.0.1 <- Message: Permission denied
127.0.0.1 <- Server: 0
Thank You!!

Alright. It's working but I'm not sure what fixed at. We just checked it and everything was alright. Thanks for your help Nicolas!

here is my manager.conf. This should be sufficient then, right?
;
; Asterisk Call Management support
;
[general]
enabled = yes
port = 5038
bindaddr = 127.0.0.1

[admin]
secret = amp111
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = all,system,call,log,verbose,command,agent,user,originate
write = all,system,call,log,verbose,command,agent,user,originate

#include manager_additional.conf
#include manager_custom.conf

I'm still getting " Can't listen to port 4445" still after running "./fop2_server" from "cd /usr/local/fop2"... Must be because it's already running...then I tried ./fop2_server restart" after buying and registering a license and get the same thing. How do I properly restart the service because I'm still only showing 15 buttons?

O.K.

netstat -lnp | grep 4445
tcp 0 0 0.0.0.0:4445 0.0.0.0:* LISTEN 2716/fop2_server

Only fop2_server is showing. I was able to login to fop2 locally but still show no activity on my active extensions. I have flash player 10.* installed. This is the same problem I had with FOP1 but all the extensions flashed red intermittently.

What might be the problem? Thank you Nicolas.

I am installing FOP2. I followed the instructions best I could. Here is the issue:

I run: ./fop2_server and get "Can't listen to port 4445"

1. I have created a manager in Asterisk API with the correct credentials.

2. I have disabled FOP1

3. I have done a "netstat -an | grep 4445" and the output is: tcp 0 0 0.0.0.0:4445 0.0.0.0:* LISTEN 2716/fop2_server

4. I do a "/usr/local/fop2/fop2_server --test" and get "Connection to Manager O.K.!"

5. I've restarted

I have Trixbox 2.8, Asterisk 1.6, FreePBX 2.5.2.

I was having trouble with FOP1. I was getting the flashing red buttons but no connection. The only thing I can think of is there is a file in usr/src that still has old credentials in it? I really haven't a clue and am completely baffled on how to get this going with my set-up. Anyone have and advice on this matter?