FOP2 2.30 Beta

  1. ‹ Older
  2. 3 years ago

    admin

    23 Nov 2015 Administrator

    Thanks for the feedback, I will review it. In the meantime, download the fop2manager tar.gz from www.fop2.com/download.php , extract it and see if you have the file in there.

  3. File is missing.

  4. admin

    24 Nov 2015 Administrator

    Redownload the file please, should be there now.

  5. A few bug on Elastix MTE :
    /var/www/html/fop2/admin/functions.php

    ligne 1715 et 1749 (suppression de encoded)
    ligne 1757 commentaire (formencoded)

    autoconfig-buttons.sh ligne 128 change exclude par fop2buttons.exclude

    After works well.

    Previous version (4th of November) some buttons were missing when we created many groups.

    Thanks for this good product

  6. @Parlanoo974 A few bug on Elastix MTE :
    /var/www/html/fop2/admin/functions.php

    ligne 1715 et 1749 (suppression de encoded)
    ligne 1757 commentaire (formencoded)

    autoconfig-buttons.sh ligne 128 change exclude par fop2buttons.exclude

    After works well.

    Previous version (4th of November) some buttons were missing when we created many groups.

    Thanks for this good product

    Can you please elaborate if my problem that all buttons are not being displayed after the upgrade is the problem you mentioned for elastix MTE?

  7. admin

    30 Nov 2015 Administrator

    Most probably it has to do with the autoconfig-buttons.sh where you must set a field as fop2buttons.exclude instead of just exclude:

    autoconfig-buttons.sh ligne 128 change exclude par fop2buttons.exclude

  8. Solved, thanks.

  9. Is it possible to run this beta along side my stable version of fop as a test?

  10. admin

    9 Dec 2015 Administrator

    It is not possible. Actually it is possible but super complicated to setup: copy the server part into a different location than /usr/loca/fop2, for example /usr/local/fop2new, copy the html files to a different location that /var/www/html/fop2, for example /var/www/html/fop2new, change the listen port on /usr/local/fop2new/fop2.cfg to something different than 4445, change web_dir to point to the new web location /var/www/html/fop2new, copy the fop2.lic file from /usr/local/fop2 to /usr/local/fop2new, then start the fop2_server from that new location to launch the server: /usr/local/fop2/fop2new/fop2_server -d, and then browse the web files http://your.server/fop2new

    However 2.30 is no longer in beta and considered stable.

  11. Hello, Just a suggestion :

    At the end of the upgrade, you should mention not only the config file of fop2 but the config file of fop2admin too.

    I must each time change the DB Access in both.

    Or for Elastix 3 MTE, you can use the default Elastix dB (elxpbx) and find the password of the db in /etc/elastix.conf
    you have a line :

    mysqlrootpwd=Password

    (user root for mysql)

    Thanks in advance

    Jean-Luc

  12. Hello, a small translation error to :
    In French, logout is "Deconnexion, not Deonnection

    Kindly

    Jean-Luc

  13. has FOP2 been tested at all or known to work with FreePBX 13 / asterisk 13 systems?

  14. admin

    16 Jan 2016 Administrator

    FOP2 2.30.x works well with Asterisk 13. Previous versions might have some little issues.

  15. @admin - This is a long shot, but we're running Asterisk (Ver. 11.19.0) with FreePBX 12.0.76.2 - Is it safe to install fop2 2.30 or will we see loads of issues?

    Thanks.

  16. admin

    10 Feb 2016 Administrator

    It is perfectly safe.

  17. Hello,
    How can I send commands by url?
    When fop2 extension installed typing fop2 allow you to type commands, like dial xxx.

    How can I do it with run commands from url?
    like http://192.168.1.10/fop2/dial xxx
    or
    http://192.168.1.10/fop2/?exten=100&pass=9999&context=tenantA&dial=xxx

    How can I use the fop2 api?

  18. admin

    24 Feb 2016 Administrator

    You cannot perform actions via URL. What you see when typing FOP2 are some smart actions available via the Chrome plugin only, where you can dial a number or change presence by typing it in the URL bar.

  19. So I can only strongly recommend that you will add/enable this option (even as a paid plugin)
    You already have great AMI proxy server that only asking for this option to be added.
    The only main commands needed are Originate a call and get CDR.
    Both are supported with a multi tenant and user authentication mechanism by your application.

  20. admin

    3 Mar 2016 Administrator

    It is not that simple. You want an http api, not a socket based one. Doing something like this:

    http://192.168.1.10/fop2/?exten=100&pass=9999&context=tenantA&dial=xxx

    Involves extra steps that are not needed. Accepting the http command/connection... then opening a websocket connection between browser and fop2 server (that takes time/cpu/etc), and then use the existing AMI connection on the proxy to perform a command.

    Much more simpler is to just use http with no websockets at all to get the command, and then forward it via AMI or similar interfaces. In fact, Asterisk 13 already has such API in place and its named ARI.

    I might write a different software using just http with no fop2 server needed in order to bridge AMI with the web, for older asterisk versions... but I think FOP2 is not the place to do it.

    If you want to use FOP2, you can just use the regular javascript protocol to do such things, if you enable debug on the fop2 server to level 12 you will clearly see the 'dialog' between the browser and the server, you can write your custom clients following that protocol if you want.

    Best regards,

  21. Hello,

    Just upgraded to the new fop server via the management GUI.
    Can't login any more.
    fop2 log show all logins as FAILED LOGIN (non existant user).
    /autoconfig-users.sh show correct users and passwords but using same credentials fail.

    Any idea?

  22. Newer ›

or Sign Up to reply!