No activity of DAHDI
-
Installed my licence key, edited the fop2.cfg to allow the custom buttons file.
In my buttons.cfg i have
[DAHDI/1]
type=trunk
label=DAHDI
channel=DAHDI/2
channel=DAHDI/3
channel=DAHDI/4restarted the fop2 service, i login i get my custom buttoms layout, and the extentions activity show but no trunk activity.
Why is the activity on the trunks not showing?
-
Most probably because the channel names do not match, try
asterisk -rx "core show channels"
While you have some calls up, how are the channels named?
- DAHDI/1-1
- DAHDI/i1-1
If option 2, then you have to add the i to the channels in your button config file. If 1, then it must work.
Best regards,
-
Just in case others are looking. I'm using an Xorcom Astribank w/ 2 PRI channels and 8 FXO / 8 FXS. My two configured trunks are the PRI channels.
In the new FOP2 manager, under button config, trunks, I had to input info in the "Extra Channel" field to get the DAHDI channels to show.
It was detected by FOP2 as DAHDI/g1 and DAHDI/g2. In Extra Channel I added "DAHDI/i1" and "DAHDI/i2" respectively and it now works.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login