No Trunk buttons Dahdi
-
I have followed the guide here http://www.fop2.com/documentation-confi ... unkButtons
but still dosn't pick up my Dahdi trunks, is there an autoconfigure trunks script? To grab the trunks from freepbx, do I have to change anything for Dahdi not Zaptel?
I haven't setup SIP Trunks yet either, would they be setup the same way?
here is my buttons.cfg file:
[DAHDI/1]
type=trunk
label=DAHDI 1-4
channel=DAHDI/1
channel=DAHDI/2
channel=DAHDI/3
channel=DAHDI/4
server=1here is what my chan_dahdi.conf file looks like though
signalling = fxs_ks
callerid = asreceived
group = 0
context = from-zaptel
channel = 1
callerid= Free For All Incorporated
group= 0
context = defaultsignalling = fxs_ks
callerid = asreceived
group = 1
context = from-zaptel
channel = 2
callerid=
group=
context = defaultsignalling = fxs_ks
callerid = asreceived
group = 2
context = from-zaptel
channel = 3
callerid=
group=
context = defaultsignalling = fxs_ks
callerid = asreceived
group = 3
context = from-zaptel
channel = 4
callerid=
group=
context = defaultgroup = 4
echocancel = yes
signalling = fxo_ks
context = Incoming
channel = 5
callerid = Free For All Incorporated
group = 4
context = defaultgroup = 4
echocancel = yes
signalling = fxo_ks
context = Incoming
channel = 6
callerid = Free For All Incorporated
group = 4
context = defaultgroup = 4
echocancel = yes
signalling = fxo_ks
context = Incoming
channel = 7
callerid = Free For All Incorporated
group = 4
context = defaultgroup = 4
echocancel = yes
signalling = fxo_ks
context = Incoming
channel = 8
callerid = Free For All Incorporated
group = 4
context = defaultI am certain I have misconfigured the buttons.cfg file, any help would be appreciated.
-
-
Just to clarify as there are some incorrect assumptions regarding trunks:
Trunk buttons are actually "GROUP" buttons, in the sense that no matter how many channels you list, you will only see ONE button.
[DAHDI/1]
type=trunk
channel=DAHDI/2
channel=DAHDI/3.. will show 1 button, not 3.
Not sure if you have that problem, but it is a good place to clear this question out.
Finally, if you use auto configuration using #exec, you cannot use at the same time static configs.. I will try to fix that on the next release, although is kind of difficult and I do not want to delay the release much longer.
Best regards,
-
-
You are not going to see any button past the 15 limit in the free version. You can reduce the number of extensions so the other types show up, or you can put the trunk first in the list. If you use the autoconfiguration script move the trunk block at the top so it will list the configuration first.
Best regards,
-
Running script on AsteriskNOW box updated new headers, keep getting command not found errors within CentOS. Not FOP2's Fault but encase anyone else is having this problem heres the fix.
sh autoconfig-buttons-freepbx.sh > buttons.cfg
autoconfig-buttons-freepbx.sh: line 45: asterisk: command not found$nano autoconfig-buttons-freepbx.sh
Referring to First line here :
DAHDI=
asterisk -rx "zap show channels" | grep -v from-internal | grep -v pseudo | grep -v Language | awk '{print $1}' | head -n 1
if [ "X${DAHDI}" != "X" ]; then
echo
echo "[DAHDI/$DAHDI]"
echo "type=trunk"
echo "label=DAHDI"
asterisk -rx "zap show channels" | grep -v from-internal | grep -v pseudo | grep -v Language | awk '{print $1}' | tail -n 2 | while read LINEA
do
echo "channel=DAHDI/$LINEA"
done
fi
Fix:
change first line where says 'asterisk -rx' to /usr/sbin/asterisk -rx
and also changing the "zap show channels" to "dahdi show channels"
seems to create the file correctly -
Had rebooted server, still no dahdi trunks, and still showing old extensions, I have deleted 10 of the extensions.
my fop2.cfg file looks like this:
[general]
; AMI definitions
manager_host=127.0.0.1 ;200.61.177.141
manager_port=5038
manager_user= user
manager_secret=password
;event_mask=call,agent; Daemon definitios
listen_port = 4444
;restrict_host = www.asternic.org
web_dir = /var/www/html/fop2; Global Config
language = en
poll_interval = 86400
poll_voicemail = 1;master_key = 5678
; USER LIST
;user=620
all
;user=621all
;user=622all
;user=623:1234allbuttonfile=buttons.cfg
blind_transfer=1
#exec autoconfig-users-freepbx.sh
With this pointing to the buttons.cfg for the users shouldn't this work? Where is Fop getting its button info from???
Its not reading this file.Please help... I believe that I am getting close.
What am I doing wrong now... :lol: These trunks are the last thing to configure within my AsteriskNOW setup..Thanks in advance.
-
Run:
./autoconfig-users-freepbx.sh
Look at the output, at the end you will see a line like:
buttonfile=XXXXXX.cfg
then look inside XXXXXX.cfg, the buttons are there. If you have a file with just an
#exec autoconfig-buttons-freepbx.sh
Then leave that file alone and run in the command line:
./autoconfig-buttons-freepbx.sh
That script will output the button config, if its wrong, you can fix the script to your liking, like adding the full path to the asterisk binary, changing ZAP to DAHDI, etc... The idea is that the script will output the proper FOP2 button configuration for your PBX.
Best regards,
-
ok I have done exactly that, i had the buttonfile=XXXXXX.cfg
then look inside XXXXXX.cfg, the buttons are there. If you have a file with just an
#exec autoconfig-buttons-freepbx.sh
so I have left it alone, and I ran ./autoconfig-buttons-freepbx.sh only to find that it didn't output anything, said it did, to what file I don't know, that was my original question.
What file is fop2 reading from to get the buttons, after you have run the script outputs to where? I have exceeded over 15 so i need to delete some of them that are in call groups anyways... but I have no idea what file to delete these from.I really don't know what is wrong. Would hater to start over again when this is all that I have left.
Thanks,
-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login