I saw this article:
http://members.asternic.biz/knowledge_base/faq-could-not-contact-registration-server
Not a problem on my server:

# ping -c 4 www.fop2.com
PING www.fop2.com (104.236.110.4) 56(84) bytes of data.
64 bytes from 104.236.110.4 (104.236.110.4): icmp_seq=1 ttl=55 time=14.1 ms
64 bytes from 104.236.110.4 (104.236.110.4): icmp_seq=2 ttl=55 time=13.4 ms
64 bytes from 104.236.110.4 (104.236.110.4): icmp_seq=3 ttl=55 time=13.1 ms
64 bytes from 104.236.110.4 (104.236.110.4): icmp_seq=4 ttl=55 time=13.2 ms
--- www.fop2.com ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3003ms
rtt min/avg/max/mdev = 13.179/13.496/14.161/0.405 ms
# sestatus
SELinux status: disabled

No iptables rules either

Since I restarted the service today my registered FOP2 is running in DEMO mode. If I do "fop2_server --test" I get:

# /usr/local/fop2/fop2_server --test
Flash Operator Panel 2 - Invalid license for this install (hostname mismatch)
Running in Demo Mode

Even though, I'm pretty sure the hostname was not changed. As mentionned in this tread:
http://forum.fop2.com/discussion/comment/11888#Comment_11888
I tried to revoke the license and got this:

License Revoke
--------------
Enter your serial code: xxxxxxxx
Could not contact registration server, please try again later. at /loader/0x24f1be0/FOP2/License.pm line 356, <> line 1.

Any idea?

.

Hi,
If I click the "Presence Icon" of an extension anf hover over "Pause Member", it cannot be clicked but "Unpause Member" can:


According to the users, "Pause Member" use to be available. Is this a permisiion issue or something else?
Regards
Daniel

Worked now by using (as per Agustin request) :

/usr/local/fop2/fop2_server --register --rp=http

and I also changed "/etc/sysconfig/fop2" from:

OPTIONS="-d "
To
OPTIONS="-d --rp=http"

When I try to register FOP2 with the serial provided via e-mail after purchase I get this:

/usr/local/fop2/fop2_server: symbol lookup error: /tmp/par-726f6f74/cache-2ceb1d8d065a835aebbb35c6be850b7c4fcd8f3b/libssl.so.6: undefined symbol: CRYPTO_memcmp

I tried via the web interface and it crashed the fop2 daemon.

I'd like to add that the names are OK in the "fop2buttons", "devices" and "users" MySQL tables.

I've changed 2 exts name in FreePBX and then I went into FOP2 admin interface and did a "Synchronize Label". I see the correct information in the admin interface but not in FOP2 itself. If i do a "fop2 reload" I see the correct name for less than a second in the FOP2 interface after the reload and then the old name will "come back".

If a run "/usr/local/fop2/autoconfig-buttons.sh" from the command line, I see the correct names.

Thanks
Daniel

When a user login/logout to/from queue via *45 (FreePBX queue login default feature code) or a user is added/deleted statically via the FreePBX interface, the "new" agent doesn't apprear in the queue's agent list of FOP2. I have to do a "/etc/init.d/fop2 reload" to update the agent list.

I'm using FOP2 2.31.11/Asterisk 11.4.0/FreePBX 2.11.0.11

Sorry for the delay, I was on vacation for the last 2 weeks.

grep config /var/www/html/fop2/admin/secure/logout.php

require_once("../config.php");

Also when we logout of the admin panel we get:

Warning
You must have a functions-custom.php file in the manager directory.
FOP2 Manager - Version 1.1.4

I've installed a FOP2 server on a separate server as per this document:
http://support.asternic.biz/?/selfhelp/view-article/installing-fop2-on-a-separate-server/8

When I run:
php /var/www/html/fop2/admin/update_conf.php
I get an error in "functions-custom.php" line 167. That line is:
if(!$res = $astman->connect("localhost:".$conf["MGRPORT"], $conf["MGRUSER"] , $conf["MGRPASS"], 'off')) {

I've changed "localhost" on that line by the IP of the remote asterisk server and now I don't get the error anymore but when I go in the admin panel I don't see any extensions. I've check the MySQL credentials and they're OK. If I check in the asterisk database, I see a bunch of fop2 tables so I guess they were created by "update_conf.php". I can connect from the mysql command line of the FOP2 server to the remote asterisk MySQL server with the credentials in "/var/www/html/fop2/admin/config.php".

Thanks for your help
Daniel

I have some extensions where the green "Presence Icon" has a check mark in it, some others are just plain green. What is the difference between the two? I don't see that info in the user guide.

Thanks
Daniel

We're a PBX hosting company and we're running our guest PBXs as OpenVZ guest containers. The problem we ran into is that when move a guest from one host to another the FOP2 license fail and we end up the an unlicensed FOP2. It does the same thing with the Stats Pro license. Is there something we can do about this?

Here's what I have:

$ cat /etc/sysconfig/fop2
OPTIONS="-d"

Hi,
On a registered FOP2 installation I get this:

FOP2 - Version 2.27 - Lite Version - Limited to 15 extensions . Buy it now for unlimited extensions. If you already have a code enter it here

If I go to the command line of this server and do this:

/usr/local/fop2/fop2_server --test

I get this:

unable to initialize libusb: -99
Flash Operator Panel 2 - Valid License (1)

Connection to manager OK!

This server has 2 IP adresses and is running on OpenVZ.

I know this tread has been inactive for a while but I'am working on a similar project. What value to "UserEvent" should I use when the user becomes "Available"? I delete the database entry but I wonder what to do so the FOP2 status doesn't display anything.

An empty Value?

Action: UserEvent
UserEvent: FOP2ASTDB
Family: fop2state
Channel: SIP/{EXT}
Value: 

Thanks
Daniel

I've uninstalled the old version and installed the latest fop2admin 1.2.14 and it now works correctly.

Thanks

Here's 2 exemple of extensions config returned by autoconfig-buttons-freepbx.sh
(304 does not have a voicemail and 310 does in voicemail.conf)

[SIP/304]
type=extension
extension=304
label=XXX
context=from-internal
queuecontext=from-queue
extenvoicemail=*304@default
privacy=none
rtmp=0
queuechannel=Local/304@from-queue/n|Penalty=0|MemberName=XXX|StateInterface=SIP/304
customastdb=CF/304

[SIP/310]
type=extension
extension=310
label=XXX
mailbox=310@default
context=from-internal
queuecontext=from-queue
rtmp=0
queuechannel=Local/310@from-queue/n|Penalty=0|MemberName=XXX|StateInterface=SIP/310
customastdb=CF/310

As you can see, 304 (no voicemail) gets the "extenvoicemail" and "privacy" parameters and 310 (with voicemail) does not.

Thanks
Daniel

I have a licensed FOP2 2.25 running on Asterisk 1.8.8.0 and FreePBX 2.9.0.7. I thought the "Transfer to voicemail" button was linked to the "mailbox=" returned by the "autoconfig-buttons-freepbx.sh" script. For some reason, some extensions with voicemail get the "Transfer to voicemail" button disabled and some others without voicemail get this button enabled. This is really annoying for the receptionist since she cannot transfert some calls to the voicemail even even though thay have one.

Thanks
Daniel