FOP2 Community Forum

Hi, First thanks for your great software,
I just install and setup FOP2 on elastix 2.5.0 stable, everything is ok but I have problem in monitoring my SIP trunk. I have Cisco 5350 as a SIP trunk, When I call outside the called number shows right on extension button but there is nothing on trunk! When the party answerd the call trunk shows just: SIP/Cisco-00000001 (the number is counting). When I received incoming call every thing is ok, I have the same SIP/Cisco-00000002 but the caller ID in front: "SIP/Cisco-00000002 09XXXXXXXXX", Please Help me to resolve this issue.
My trunk config:
Name: Cisco
context=from-trunk
type=peer
trunk=yes
sendrpid=yes
trustrpid=yes
username=XXXX
secret=XXXX
qualify=yes
dtmfmode=inband
insecure=very
host=X.Y.Z.W
disallow=all
allow=ulaw&gsm&alaw

WoW! Thanks in advanced! Everything is fine now, just a little question;
I really don't need to monitor all calls with DAHDI/i1/xxxxxxxxxxxxxx-xxxx details, there are more than 240 channels monitoring! I need just number of lines in use to be shows as already showing on top, Please help me on this too
again thanks alot

Dear Nicolas,
Thanks for your advice but no change on my issue after doing all you mentioned.
[url=http://postimage.org/image/wocnotewb/:1abexqc3]*http://s9.postimage.org/wocnotewb/fop2.jpg*[/url:1abexqc3]
[url=http://postimage.org/image/4v0q5kw21/:1abexqc3]*http://s12.postimage.org/4v0q5kw21/fop_admin.jpg*[/url:1abexqc3]
ps: added channel ranges not saved after submit in freepbx fop_admin

Hi,
I'm using fop2 with elastix 2.3.0.8[/color:3pi26f16], Everything work's fine for me but DAHDI channels,
I have Sangoma A102 card (2*E1) and my trunks configured by "Zap Trunk (DAHDI compatibility mode)[/color:3pi26f16]"
now i have 2 Zap Trunks named: ZAP/g2[/color:3pi26f16] & ZAP/g12[/color:3pi26f16] with different numbers. fop2 shows me just two buttons with these names and nothing more! I can't see & monitor channels. Please help

FOP2 ver: 2.26
Asterisk ver: 1.8.20.0
Dahdi ver: 2.6.1
Wanpipe ver: 3.5.28

ps: weird thing i noticed: in result of asterisk -rx "core show channels"[/color:3pi26f16] command i have: DAHDI/i2/XXXXXXXXX[/color:3pi26f16] & DAHDI/i1/XXXXXXXXXX[/color:3pi26f16]